How to Identify Replacement Bearings, Races and Seals for Harbor Freight Trailer 92174
Question:
Recommendation for a Harbor Freight Trailer 92174 replacement bearings/seal?
asked by: Alejandro R
Helpful Expert Reply:
The best way to determine the replacement bearing, race and seal parts needed for a trailer is to pull one of the hubs and remove them so their part numbers can be noted. Usually bearings and seals will have part numbers stamped or molded into them, as you can see in the linked image.
You can search our site using those part numbers to see if we offer them. You can also measure the spindles on the trailer's axle at the points B, C and D noted in the image using a precision caliper like # PTW80157. This will allow you to use those dimensions to search for matching parts. I also linked our main page for bearings, races and seals.
I checked the documentation for the Haul-Master trailer 92174 but it does not specify the bearings used. This is not unusual with bargain imported trailer kits which often use unusual parts not commonly available. It is sometimes necessary to obtain replacement parts from the trailer maker.
You can refer to the two linked articles on bearings for additional information.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review
- Shop: Roof Rack
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated (Pair)
- Q&A: Troubleshooting Tire Blowouts on Jayco Pop-Up Camper
- Q&A: Dust Cover/Cap Solution for Harbor Freight Trailer
- Shop: Trailer Wiring
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB2047 Review
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Article: How Much Solar Power Do I Need For My RV?
- Video: etrailer Trailer Idler Hub Assembly Review
- Q&A: How To Find Bearing Replacement For Harbor Freight Trailer
- Q&A: Which Bearing Buddy for Harbor Freight Trailer 62648 & 62666
- Video: Review of Lippert Components - Trailer Jack,Camper Jack - LC362485
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Video: B and W Custom Base Rails Kit Installation - 2021 Ram 2500
- Video: Curt 5th Wheel Wiring Harness Installation - 2021 Ram 2500
- Video: B and W Custom Base Rails Kit Installation - 2017 Ram 2500
- Q&A: Recommended Grease Caps for 2.04 Inch Diameter Hub Bore on Trailer
- Q&A: Troubleshooting Overheating Hubs on a Trailer With New Bearings and Grease
- Search Results: trailer wire extension
- Search Results: stabilizer
- Search Results: anti rattle clamp
- Search Results: locking hitch pin
- Search Results: 2" drop ball mount