Which Bearing Buddy for Harbor Freight Trailer 62648 & 62666

Question

Question:

These are the 1195lb capacity trailers they sale.

asked by: Trevor

0

Expert Reply:

The Bearing Buddy we have found that fits most of the Harbor Freight trailers is the part # BB2047 which would be the correct one for if your hub bore was 2.047 inches.

I'd recommend verifying that measurement on your trailer hub bore.

expert reply by: Jameson C

0

Answer 1

In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into…

view full answer...

Answer 2

I have a solution for you but there isn't a specific cover for a utility trailer, and I've mostly seen people use a tarp like the Erickson #EM57040 to keep their utility trailers covered up. However, I recommend using a pop-up camper…

view full answer...

Answer 3

You can go larger in tire in some instances, but it's going to depend on how much larger you want to go. You don't want to see any less than 3 inches of clearance between the top of the tire and the underside of the fender. A 4.80/4.00-8 tire…

view full answer...

Answer 4

A 4.80-12 trailer tire and wheel such as the Kenda #AM30630, when inflated will measure 20.7 inches in diameter and have a width of 4.9 inches. A 175/80-13 trailer tire and wheel will measure 24 inches in diameter and have a width of 6.6 inches so…

view full answer...

Answer 5

Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it's very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road…

view full answer...

Answer 6

The model 1980 Bearing Buddy simply means that they fit a 1.980 inch hub bore. There is one difference of note between Bearing Buddy Bearing Protectors #BB1980A (Chrome Plated) or #BB1980A-SS (Stainless Steel) and the Bearing Buddy Bearing Protectors…

view full answer...

Answer 7

Harbor Freight trailers do not typically use standard hubs or spindles. In most of the situations that we have encountered, we do not carry a hub that uses the same bearings and seal that Harbor Freight uses. The best way to determine if we have a…

view full answer...

Answer 8

We often hear of weak customer support and limited spare parts availability with "bargain" trailer manufacturers. I found an online copy of the owner's manual for the Harbor Freight Haulmaster utility trailer model 90154 but it includes…

view full answer...

Answer 9

According to page 249 of the owner's manual for your 2013 Ford Edge, the 3.5L V6 has a max towing capacity of 2,000 lbs without the tow package but 3,500 lbs with the tow package. I'm not sure what all comes with the Class II Trailer Tow…

view full answer...

Answer 10

The bearing that you have on the trailer hub measures just under 1 inch (0.985) and we are not going to have a hub that accepts a bearing with an inner diameter of that size. This is common for the trailer kits like the Haul Master branded trailers.…

view full answer...

Answer 11

The Kenda trailer tire part #AM10130 that you referenced can fit all standard 12-inch trailer wheel sizes so it would work well on the 12-inch wheel you have on your Harbor Freight trailer.

view full answer...

Answer 12

Since the axle on your Harbor Freight 4' x 8' Utility Trailer currently has hubs that have the 4 lug bolt pattern you will need to at a minimum change the hubs to one that uses the common 5 on 4-1/2" bolt pattern. To find the correct…

view full answer...

Which Bearing Buddy for Harbor Freight Trailer 62648 & 62666

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching