Will Bearing Buddy Grease Caps Fit a Harbor Freight Trailer 62671 Folding Trailer?

Question

Question:

Getting the bearing numbers. I just got the trailer. Removed their grease, put in my choice. Torqued the lugs nuts down to specs. It has a regular (not tapered) 1 inch spindle - 12 inch tires - 5 lugs. Is it possible to recommend something based on the numbers above? ( On the internet I found some people saying that they use Dexter hubs as replacement on the 1 inch spindle HBF trailers ) Thoughts? You have great videos on YouTube! Thanks,

asked by: John

0

Expert Reply:

We don't have a kit for Harbor Freight trailers and their parts are very rarely compatible with standard trailer parts like we carry. We have however found there are times when the bearing buddies # BB2047 specifically has fit. We haven't confirmed a fit on that model yet, so you will need to measure the hub bore of the hubs on your trailer. If the hub bore is 2.047 then these will work for you.

For a hub and bearings, you would need to pull the hub and look at the bearing numbers. Based on those numbers, I can see if we have anything that will fit. We haven't had much luck with a fit in the past on similar trailers but it is possible.

expert reply by: Jason S

0

John

9/26/2017

Getting the bearing numbers. I just got the trailer. Removed their grease, put in my choice. Torqued the lugs nuts down to specs. It has a regular (not tapered) 1 inch spindle - 12 inch tires - 5 lugs. Is it possible to recommend something based on the numbers above? ( On the internet I found some people saying that they use Dexter hubs as replacement on the 1 inch spindle HBF trailers ) Thoughts? You have great videos on YouTube! Thanks,

Reply

Jason S.

9/26/2017

For a 1 inch spindle, I recommend replacing the hubs with either the Trailer Idler Hub Assembly for 2,000-lb Axles - 8" to 12" Wheels - 5 on 4-1/2 # AKIHUB-545-2-1K or the Trailer Hub Assembly for 8" to 12" Wheels - 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings # 8-259-5UC1. If you use these hubs, then you can use the Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair) # BB1980A. I've attached some videos to assist.

Reply

Answer 1

From what I could find, the Harbor Freight trailers do say not to exceed 45 miles per hour in the owners manual. That being said, the tires they use are not rated very high and may be the limiting factor. The trailer you have looks to use a 5 on 4…

view full answer...

Answer 2

Depending on how wide the tires are an 88 inch long axle may or may not be wide enough (also depends on where the axle is being measured). Going with a 96 inch axle would be the safer bet. But you can also order a trailer axle from a local tractor or…

view full answer...

Answer 3

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Answer 4

I don't think that your wheel size (or lack thereof) has anything to do with the bearings on your HF trailer drying out as much as it is likely that the seal blew out from overfilling the grease or poor installation. This isn't uncommon when…

view full answer...

Answer 5

view full answer...

Answer 6

To select a set of replacement idler hubs for your Fleetwood Destiny trailer you want to match up a few characteristics from your originals. These include the axle weight capacity, wheel bolt pattern and the bearing set used in the hubs. A…

view full answer...

Answer 7

I am happy to help you figure out which dust cap you need for the Haul Master utility trailer model 90154 however, I was not able to find any information about the wheels on your utility trailer. To get the correct sized dust cap you can simply…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Will Bearing Buddy Grease Caps Fit a Harbor Freight Trailer 62671 Folding Trailer?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching