Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.3 out of 5 stars (23 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.No information is provided as to axle to brake flange spacing so this will fit and work. If you don't already have the complete axle, buyer beware this will be a huge pain.
I have a 2004 Honda trike that I built a pull behind trailor for! After pulling it loaded it was hard to stop safely! This brake assembly along with the Redarc brake controller done the JOB! now it stops safely
was delivered in ripped up box,looked like someones returned item.missing dust caps,an half the lug nuts.
great service
Upgraded my hubs and added electric brakes to my Aliner. As usual with etrailer, great product and even better customer service. I originally ordered the wrong size and etrailer worked with me to determine the correct size for my trailer. They then sent out the new parts and gave me a full refund on returned parts. New hubs and brakes work flawlessly.
etrailer.com needs to change up their website to ask you to select the bearing size you need for this product upon adding it to your cart. This mistake is ultimately on me, but I think the site could improve the shopping experience by making the user select the proper bearing size.
I ordered two of these hubs and it came with a bearing that was 0.05 too small. I asked to exchange and they told me that the only ones they had in stock with the bearing I needed were 80 bucks more (each).
I asked to return them. Sure, no problem, that'll be $[XX] to send them back.
So my advice is to choose wisely when you order and make sure you have the right bearings.
I ended up putting my old bearings in the new hubs. Perhaps etrailer.com could have just swapped the bearings for me as an alternative
Needed to add brakes to my trailer to meet the specs of our vehicle's towing capacity. These hubs were one of many purchase required to make that happen.
It's been a year and they've been working as expected.
Great quality product. Complete drum and hub assembly makes replacement very easy
Been using it for over a year now on my pop up camper and has been very dependable.
Super easy to install, well made produc ts.
looks identical to my original one
Rep Christina was outstanding!! Professionalism, empathy, courteous, and competent!. All issues resolved and we are up and operational once again
Looks good
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
6/9/2023
Yikes that sounds like quite of bit of damage to the box. I will have our Customer Service team contact you so that we can have the missing parts shipped out.