How Wide is the Braking Surface on the Trailer Hub and Drum Assembly AKHD-545-2-EZ-1K
Question:
What is the internal width of the braking surface for this drum.
asked by: Derrick
0
Expert Reply:
The braking surface on the Trailer Hub and Drum Assembly part # AKHD-545-2-EZ-1K is 2-1/4" wide. I went out to our warehouse to confirm this for you. If you need a set of braking assemblies to use with them, I recommend the Electric Trailer Brake Kit part # AKEBRK-2. These assemblies have pads that are 1-1/4" wide though you could use larger should you need to do so.
expert reply by:
Conner L
0
Products Referenced in This Question
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Tire Sizing
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Gauge Wire to Use when Installing 2k Trailer Axles
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Replacement Hub Drums for AL/KO 8440 and Compatible Brake Assemblies
- Q&A: Reusing Trailer Hub/Drums When Replacing Brake Assemblies
- Q&A: How to Select Replacement Hubs for 2200-lb Dexter Axle on Aluma Motorcycle Trailer
- Q&A: How to Wire Trailer Brake Magnets