Replacement Hub/Drum For Dexter 8-271 With 5 Bolt Mounting Pattern
Question:
I have a wolverine pontoon boat trailer. I am looking for a drum Info on hub is: Dexter Dia 7.00 7J05, WF2, 8-271 5 lug 1 inch axel shaft I am needing the drum, bearings, seals and grease jet cap. Any help would be greatly appreciated Thank You
asked by: James V
Expert Reply:
We do have the Dexter Trailer Hub and Drum Assembly for Standard # 8-271-7UC3 or EZ Lube # 8-271-7UC3-EZ axles. These are the 8-271 hubs you have with the 5 on 4-1/2" bolt pattern. These fit on a 1-1/16" diameter BTR spindle. They include all the bearings, races, seal, lug nuts and grease cap.
If you only have a 1" BT8 spindle you will need the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-2-EZ-1K. The easiest way to verify is by removing the hub castle nut and checking the part number on the outer bearing. A 1" spindle uses a Bearing # L44643 while a 1-1/6" spindle uses a Bearing # L44649.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb E-Z Lube Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: What Gauge Wire to Use when Installing 2k Trailer Axles
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Reusing Trailer Hub/Drums When Replacing Brake Assemblies
- Q&A: Replacement Hub Drums for AL/KO 8440 and Compatible Brake Assemblies
- Q&A: How to Wire Trailer Brake Magnets
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: 2,200 lb Axle Replacement System for Triton Snowmobile Trialer
- Q&A: 2,000 lb Hub & Drum Compatible With 13 Inch Wheels
- Q&A: Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch