Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
(20 reviews)
Price: $371.46
In Stock
Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
Item # 8-285-11
Retail:$607.08
Our Price: $371.46
You Save: $235.62
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-285-11
- 8 on 6-1/2 Inch
- For 8000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- EZ Lube
- 9/16 Inch Stud
- 02475
- 25580
- Dexter
Install this hub-and-drum on your trailer. Hub fits 8,000-lb E-Z Lube axles. Inner and outer races included. Inner bearing (25580), outer bearing (02475), grease seal, EZ-Lube grease cap, and lug nuts sold separately.
Features:
- Trailer hub-and-drum provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- E-Z Lube grease cap (sold separately) makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Inner and outer races included
- Bearings, grease seal, E-Z Lube grease cap, and lug nuts sold separately
- Made in the USA
Specs:
- Application: 8,000-lb E-Z Lube trailer axles with #42 spindles
- Drum dimensions: 12-1/4" diameter x 3-3/8" wide
- Works with 12-1/4" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Wheel stud diameter: 9/16"
- Pilot hole diameter: 4-3/4"
- Weight capacity: 4,000 lbs
Bearing, Race, and Seal Information
- Bearings (sold separately)
- Inner bearing: 25580 (1.750" inner diameter)
- Outer bearing: 02475 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 02420
- Grease seal (sold separately): 10-36
- Inner diameter: 2.250"
- Outer diameter: 3.376"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
008-285-11 Dexter 12-1/4" Hub and Drum with Races for 8K Axle - 8 on 6-1/2 - EZ Lube
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2 - 8-285-11
Average Customer Rating: 4.7 out of 5 stars (20 Customer Reviews)
Install this hub-and-drum on your trailer. Hub fits 8,000-lb E-Z Lube axles. Inner and outer races included. Inner bearing (25580), outer bearing (02475), grease seal, EZ-Lube grease cap, and lug nuts sold separately.by: Jesse01/29/2024
I have not received one of the hubs the breaks came in and three hubs
by: Enoc03/29/2023
This are great quality! I recommend! I have a PJ trailer and this is what I was looking for. It was hard to find but etrailer had them. Thank you.
by: Jennings09/20/2023
Fast delivery.
by: Nanci07/12/2023
Exactly what I ordered .. Delivered on time!
by: Ken G03/02/2022
fit well work great! Thanks again.
by: Deler07/11/2021
Quality parts
by: Rob 03/26/2024
by: Jim 02/01/2024
by: Gary 06/09/2023
by: Ray 09/26/2023
by: Johnson03/29/2021
by: John 01/17/2023
by: Kami02/23/2021
by: Tom 11/11/2021
by: Jim 08/08/2022
by: Brittany 11/23/2021
by: David 09/24/2021
by: Becky 12/10/2021
by: Myron 12/23/2021
by: James 12/30/2021
20
20
See what our Experts say about this Dexter Trailer Hubs and Drums
- Recommended Hub and Brake Assembly for 2,000 Pound Timbren Axle-Less Suspension SystemAs long as you are not going over the 2,000 lb capacity then the Timbren Axle-Less Trailer Suspension System # ASR2000S02 will work well. You will need one like this that has the brake flange attached in order to use brakes. For a compatible hub and drum assembly, I recommend the # AKHD-545-35-EZ-K. This uses a 5 on 4-1/2 bolt pattern so you will want wheels that match the bolt pattern. For brake assemblies, I would choose self adjusting brakes like the Dexter Nev-R-Adjust Electric Trailer...
view full answer... - Is Dexter Trailer Hub and Drum # 8-285-11 Compatible With 16" Wheels?Yes Dennis, the Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2 # 8-285-11 is compatible with 16" wheels. Just make sure the specs match up to your current setup.
view full answer... - Is Dexter Trailer Hub/Drum 8-285-11 Grease or Oil BathThe Dexter trailer hub part # 8-285-11 is a grease hub. We do not have a version of this that is oil bath.
view full answer... - Is The Distance Between Races On Dexter Hub 8-285-11 and 8-393-6UC3-A The Same?I had our warehouse measure the distance between the inner and outer races of the Dexter Trailer Hub and Drum # 8-285-11 and # 8-393-6UC3-A and they found that both of them have the exact same 1-3/4" measurement, so as long as you have the # 25580 inner bearing and # 02475 outer bearing combination either hub will fit fine. You will just need to match the hub to the correct brake assemblies as the # 8-285-11 uses 12-1/4" x 3-3/8" brake assemblies # 23-434-435 where the # 8-393-6UC3-A uses...
view full answer... - Replacement Hub Drum for Hayes 8k Trailer AxleLooks like you have an 8k rated Hayes trailer axle hub which for that would require the part # 8-285-11 for a replacement hub.
view full answer... - Are 8k Dexter Trailer Hubs a Fit for Both Sides of the TrailerTrailer hubs are not directional like brake assemblies are. The number you mentioned is very similar to the # 8-285-11 which is a fit for both the right and left side of the trailer. The electric brake drum assembly that fits the 8-285 hub and integrated drum would be the Dexter Electric Brake Assembly-Left Hand, part # 23-434, for the left side and Dexter Electric Brake Assembly-Right Hand, part # 23-435.
view full answer... - Dexter Equivalent Replacement for Lippert 148627 Hub/DrumThe comparable Dexter product would be part # 8-285-11, which is an 8K 12-1/4 x 3-3/8 hub/drum with a 8 on 6-1/2 inch bolt circle. The drum comes with the races already installed, but the # 25580 and # 02475 bearings and # RG06-070 grease seal are sold separately.
view full answer... - Availability of Electric Brake Drum Assembly for # 8-285-11 Dexter Trailer Hub and DrumThe Dexter Trailer Hub & Drum Assembly, part # 8-285-11UC3, that you have referenced, is the # 8-285-11 hub and integrated drum with the bearings, races, seal, cap, and lug nuts for a Dexter 8,000-lb axle. The electric brake drum assembly that fits the 8-285 hub and integrated drum would be the Dexter Electric Brake Assembly-Left Hand, part # 23-434, for the left side and Dexter Electric Brake Assembly-Right Hand, part # 23-435. These brake assemblies are for use on 8,000-lb and 9,000-lb...
view full answer... - Replacement Axle Components For Dexter D80 8,000LB Axle Under 2016 Landmark Orlando 5TH WheelThank you for the image of the axle tag for your Dexter D80 8,000LB axle. This will require the 10-36 Grease Seals # RG06-070 you found. Here is a list of the other components your axle uses should you want to replace or find any parts worn. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 02475 Outer Race # 02420 Left Hand Brake Assembly # 23-434 Left Hand Brake Shoes # BP04-245 Right Hand Brake Assembly # 23-435 Right Hand Brake Shoes # BP04-255 Brake Spring Kit # K71-506-00 Hub/Drum...
view full answer...
- Is it Necessary to Grease the Hubs on a G-45 TipperIf is has wheels and bearings then it's going to need grease (or oil if it is an oil bath hub). I have included a link to a video that shows how to pack bearings with grease by hand. We also have a tool that can be used, # L70025, that you can use with a grease gun, # L30100, to limit the mess. Also, you have to make sure that the grease used is compatible with the grease still on the bearings and in the hub. If you are not sure then you will need to completely remove the old grease before...
view full answer... - What Spindle Does 8,000 lb Dexter Hub part # 8-285-11 FitThe Dexter hub part # 8-285-11 that you referenced is designed to fit number 42 spindles like part # TRU37FR.
view full answer... - Recommended Hub and Drum Assembly with 5/8 Inch Studs for 8,000 Pound Dexter AxleThe 008-285-11 number you found on your existing Dexter hub does refer to the Dexter Trailer Hub and Drum # 8-285-11, however as you mentioned, this particular assembly uses 9/16 inch wheel studs. This is the case with all of our grease lubed hub and drum assemblies that are designed for 8,000 pound axles. We do have the Redline Trailer Hub and Drum Assembly # 8-285-10UC3-A, which will work as a replacement on your axle. This is an oil bath hub and drum that uses the same # 25580 inner...
view full answer... - Grease Cap for Dexter 8-285 Trailer HubAn 8-285 hub does not have the correct bearings or races to work with Bearing Buddies, so you would need to use a standard grease cap. For example, the # 8-285-11 hub and drum needs Trailer Hub Grease Cap # TRU66FR for a quantity of one or # RG04-120 for a quantity of two.
view full answer... - 2015 Palomino Sabre 36QBOK Brakes and Bearing RecommendationI looked in several places online and couldn't get a definite axle capacity for your trailer. I'd assume it's a pretty high capacity since it's a tandem axle trailer that weighs 12k and has 3k of capacity. So most likely you have 8k axles like what the part # 8-285-11 hub fits which has bearing numbers # 25580 and # 02475 with grease seal # RG06-070. Then for brake assemblies part # AKEBRK-8. Get me the diameter of your axles though and I'll be able to get you a better recommendation. Typical...
view full answer...
- Replacement Hub Drum and Brake Parts for 8K Dexter AxlesFor 8K Dexter Axles you need the Electric Brake Kit # 23-434-435 (1 for each axle) and then 2 of the Hub and Drum Assembly # 8-285-11 for each axle. If you need to replace any wiring then that would be part # 10-1-1, sold by the foot, and heat shrink butt connectors # DW05745-10. Let me know if there is anything else in your setup that you're needing!
view full answer... - Comparing Dexter Hub and Drum Assemblies 8-285-11 and 8-393-4UC3You will experience some reduced braking power when using the Dexter Trailer Hub and Drum Assembly # 8-393-4UC3 with 12-1/4 x 2-1/2" brake assemblies compared to the # 8-285-11 with 12-1/4" x 3-3/8" brake assemblies. Between the two I recommend going with the # 8-285-11 along with bearings # 25580 and # 02475, grease seals # RG06-070, lug nuts # 6-53, and grease caps # rg04-120. For brakes I recommend the self adjusting braking assemblies # 23-434-435. Since you mentioned your axle does...
view full answer... - Meaning of 8 on 6-1/2 Inch Bolt Pattern for Dexter Hub # 8-285-11The 8 on 6-1/2 inch description that you see for the Dexter Trailer Hub # 8-285-11 refers to its bolt pattern. It is important to note this feature when replacing your hubs because it needs to match the pattern on your existing wheels for the wheels to mount properly. If you are unsure what bolt pattern is on your current hubs or wheels you will just need to take a quick measurement to determine this. For a wheel or hub with 8 bolts, you will simply measure from the center of one bole...
view full answer...
- Electric Trailer Brakes For 12-1/4 Inch Dexter 8-285 Hub & DrumWe do have the correct electric trailer brakes that will fit your Dexter 8-285 hub and drum, which is a 12-1/4 inch drum. You can choose from the following two options, both of which will work for you: - Electric Trailer Brake Kit with Dust Shields - Self-Adjusting # AKEBRK-8 - Dexter Electric Trailer Brake Kit - Self-Adjusting # 23-434-435 Along with these brakes, the only other thing you will need is their mounting hardware, the Mounting Bolts and Hardware for 12-1/4" Brake Assemblies...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
1/31/2024
Just wanted to let you know that I saw this review and contacted a customer service team lead. They will be able to make sure you get your complete order. Thanks for reaching out and letting us know there was an issue!