Are 8k Dexter Trailer Hubs a Fit for Both Sides of the Trailer
Question:
If hub 008-285-08 is on the right side what would be the part number for a hub on the left side of the 8000pd dexter axle?
asked by: Bruce W
Helpful Expert Reply:
Trailer hubs are not directional like brake assemblies are. The number you mentioned is very similar to the # 8-285-11 which is a fit for both the right and left side of the trailer.
The electric brake drum assembly that fits the 8-285 hub and integrated drum would be the Dexter Electric Brake Assembly-Left Hand, part # 23-434, for the left side and Dexter Electric Brake Assembly-Right Hand, part # 23-435.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Left Hand - 8K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Right Hand - 8K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 02475
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Q&A: Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
- Q&A: Replacement Axle Components For Dexter D80 8,000LB Axle Under 2016 Landmark Orlando 5TH Wheel
- Q&A: Grease Seal Recommendation to Replace TCM 21334
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Caps for Oil Bath Hub With 2-3/4 Inch Diameter at the Threads
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: The 4 Crucial Choices You'll Make When Buying a Boat Trailer
- Q&A: Replacement for Dico 15638 Hub Drum and Brake Shoes for 10 Inch Atwood Hydraulic Brake Assembly
- Q&A: Electirc Brake Kit AKEBRK-8 Dimensions and Slipper Springs for 9,000 Pound Axle
- Article: How to Tell the Weight Rating of a Trailer Axle