Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
(55 reviews)
Price: $279.06
In Stock
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
Item # 8-219-13UC3
Our Price: $279.06
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-219-13UC3
- 8 on 6-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Pre-Greased
- Standard
- 9/16 Inch Stud
- 14125A
- 25580
- Dexter
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Pre-greased hub is easy to install - no need to pack bearings
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb to 7,000-lb trailer axles with #42 spindles
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Grease cap flange diameter: 2.72"
- Wheel stud diameter: 9/16"
- Weight capacity: 3,500 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS-2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-219-2G Dexter 12" Trailer Hub and Drum Assembly for 5.2K to 7K Axle with Hardware - 8 on 6-1/2 - 9/16" Studs
Replaces 8-219-13UC3
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased - 8-219-13UC3
Average Customer Rating: 4.5 out of 5 stars (55 Customer Reviews)
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Sidney11/28/2022
I have had this item installed for approximately one year on our 42 foot, 18,000 pound 5th wheel. It was easy to install and set up and has worked flawlessly ever since. We have put over 6,000 miles on the 5th wheel since the installation. I will definitely buy again if the need arises.
by: Daniel07/27/2022
My order arrived in a timely manner. I did not like the way the items were based for shipment. All 4 brake assemblies were in one box, making for a very heavy box. The trailer hubs and drum assemblies were packed 2 in a box, making foe a very heavy box. None of the items, brakes or drum assemblies, were boxed in separate boxes within their shipping boxes. This is why, I believe, one of the inner bearings was damaged in shipping, making it not usable. Please ship a replacement bearing right away. I have attached photos of the damaged bearing. Please let me know the shipping number on the replacement bearing.
Jenny N.
8/2/2022
For this order, the packaging could definitely be improved. I will share this feedback with our shipping department and have our customer service team have a replacement sent to you.
by: Jay M.09/15/2015
I ordered Dexter backing plate assembly and drum. Great prices! The drum came with races, bearings and grease seal. Everyone else that I checked with, races, bearings and the were extra and at higher price! I received all the items when expected. I would definitely recommend etrailer to anyone looking for great prices and customer service. Thank you etrailer
Jay M.
9/14/2016
Wow! it’s already a year?. So far so good. No problems with any of the parts I ordered..
by: Richard11/17/2021
I received 3 boxes all of which had some sort of damaged or destroyed parts in it. All of the bearing kits are garbage, I will need replacements. The back plate and pad assemblies were ok, only two I had to installed the adjuster bolt back into and inspect for damage, but only received 2 of 4 nut and plug kits seen in pictures attached. Everything was improperly boxed, boxes are way too large for these components and hardware/bearing kits were packaged with very heavy components. Bearing kits should have been shipped separately in a small package. Bearing kit was also not in a proper bag, if not a ziploc at least tape the bag shut. I hope the drums are ok, I will have to grind on 2 of them just to allow the wheel to mate properly. I will have to measure all of the races and drum dimensions to ensure they are not warped or bent in any way. Extremely unhappy with this purchase. What a waste of components.
Jenny N.
11/19/2021
I will have our customer service team reach out to you.
by: Richard04/28/2024
Fast & friendly service. The quality of the parts are great. Thanks
by: Ms. Potts01/18/2024
Package came in excellent condition.
by: Victor 06/22/2023
Perfect replacement for my rig.
by: Gary 10/11/2023
Good quality, good price, good delivery
by: Olemax03/10/2017
I bought these to use on a fairly heavy (about 12k #, loaded) 5th wheel. These were bought to replace ones previously purchased w/ 1/2" lugs. I didn't realize there was a difference until they were already installed.
Now everything is working beautifully, except I'm now in the middle of replacing the chinese-made wheel bearings that came with the replacements from Etrailer, the reason for 3 stars, vs. 5.
Not only is the origin questionable, but the bearings and cups were shipped loose in a bag with the rest of the hardware (lug nuts, etc.) Precision bearings must be individually wrapped, boxed, and never touched directly by human hands, to prevent corrosion, and contamination which lead to early failures. Sorry, but these things are only good for low-speeds, and short distances, such as farm equipment.
Olemax
3/24/2018
The hubs and drums are working well after a season of camping, which didnt see more than a couple hundred miles of travel.
by: Kelvin01/02/2018
Product was shipped quickly and very well packed , absolutely no box damage for such a heavy item. The hubs look well made and came with all the hardware. Bearings are made in china but what isn't these days my advice is to purchase a bearing grease packing cone so you insure your bearings are fully packed . Everything fit perfectly .
Kelvin
1/2/2019
I couldnt be more satisfied with my purchase I have logged over 10000 miles on my rig since I installed my new brakes & drums . just rotated my wheels and inspected my bearings, they look great!
by: Dustin 09/07/2023
Great service, fast response time and a follow up on our fitment and condition of the product. Can't ask for much else.
by: Ronald 10/18/2023
Fit exactly as the original.
by: Andy06/19/2019
Brake drums and backing plate assembly had great availability and pricing was excellent , shipping was fast...
Andy D.
6/20/2020
Excellent ! I have had no issues at all. Still working great..
by: Joe 10/05/2022
Same as other side. Happy to get installed on trailer we bought and wanted to start fresh with brakes and axles
by: Joe06/15/2020
Quick efficient and economical
Superb service
Got us rolling again!!!
by: brad s12/07/2018
Looks like an exact replacement hub for dexter 7k axle
lost a brake shoe on a new 42 foot 2019 forest river fifth wheel, overheated the bearings and seal,
this has the same bearings as the original, yes, bearings are from china but so are the original hubs and bearings from dexter,
I bought 4 of these a few years ago to update our previous fifth wheel a 32 foot nuwa
ran them for over 8k miles with no problem
by: Joe11/15/2013
I recently borrowed a trailer from a friend of mine and it had to have been infested with grease worms. Needless to say, burnt up a bearing and spit the hub off before I made it to load. I found the parts I needed on this website, but had to purchase seals and dust caps I didn't need along with a kit as well as the correct seal and dust cap for my trailer. I was also disappointed when the EZ LUBE dust cap I purchased did not come with the rubber access plug. I got it put back together, and with a little duct tape to cover the dust cap, the tractor will be moved tomorrow.
by: Tim05/04/2019
Product arrived damaged. The bearings and grease caps are damaged. Retailer posted a credit due to the problem. Great company a fast reply on products.
by: Darrell Block08/30/2019
The product, Dexter brake drum assembly, was exactly as advertised and delivered as promised. I could not have asked for any better product quality or service.
by: Stan07/01/2015
I made a big mistake and ordered the wrong hubs for my trailer. Called etrailer and got a return authorization and expedited the correct ones. Delivered on time and fit great.
Everyone at etrailer and the on line info was very helpful.
by: Keith Halsey08/02/2015
Had some rust on outside bearing race but I think it cleaned up good enough that it won't be a problem. Otherwise very happy with transaction.
by: Bent12/15/2022
You communicate the status of the order to us throughout the sales cycle and I like that. Thank you
by: Sidney 08/17/2020
Order arrived ahead of time, everything was complete. Will definitely use Etrailer again.
by: Brian 05/10/2020
Exactly what was needed and dexter genuine parts
by: Debra 03/26/2020
What we needed for the Big Tex trailer.
25
55
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Could Dexter Trailer Hub part # 8-219-13UC3 Be Used on an EZ Lube SpindleYes, you can swap out the grease cap of the Dexter Hub part # 8-219-13UC3 to one that has a hole and rubber plug and it would be perfectly compatible with EZ Lube spindles. For that all you'd need is the part # RG04-120 and you'd be set. The only difference between the Dexter EZ lube hubs and non EZ lube hubs is the cap.
view full answer... - Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound AxlesThe size socket used isn't necessarily going to be the same as the nut or stud thread size. It is usually larger since the outer width of a hex head is larger than the threaded diameter. Hub and drum assembly # 8-219-13UC3 for 5,200 to 7,000 pound axles does indeed have a stud diameter of 9/16 and would take 9/16 inch lug nuts. We also have the similar etrailer model, # AKHD-865-7-1-EZ-K, that also has 9/16 inch studs. Both it and the above assembly are for EZ Lube axles. If your axles...
view full answer... - Stud Length for 5.2K - 7K Dexter Trailer Hub and Drum AssemblyThe studs on the Dexter Trailer Hub and Drum Assembly # 8-219-13UC3 are just over 1-1/4" long so they will be able to accommodate the 3/4" thickness of your aluminum wheel just fine.
view full answer... - Could Cap of Dexter Hub # 8-219-13UC3 be Replaced with EZ Lube CapYes, you could replace the dust cover/cap of the # 8-219-13UC3 with an EZ lube style cap and you'd basically have an EZ lube hub as that's the only difference. For that you'd only need the # rg04-120 for a pair and you'd be set.
view full answer... - Thread Pitch of Dexter 9/16 Trailer Wheel Lug Nut STN569On Dexter 9/16-inch lug nut # STN569 the thread pitch is 18-TPI. I went to our warehouse and did a test fit of this lug nut on Dexter hub/drum # 8-219-13UC3, which meets your description of an 8-on-6-1/2 Dexter hub with 9/16-inch studs for 7K axles.
view full answer... - Hub and Drum Assembly with 8-on-6-1/2-Inch Bolt Pattern and 9/16-Inch StudsDexter Axle part # 8-219-13UC3 is a hub-and-drum assembly rated for 5200-7000-lb axles with an 8-on-6-1/2-inch bolt pattern and 9/16-inch studs. This hub comes complete with lug nuts, bearings, races, seal and grease cap. This unit uses the same bearing set, 25580/14125A, as your existing unit. Two linked videos illustrate this item and an example of a hub/drum installation.
view full answer... - Are Dexter Hubs # 8-219-13UC3 and # 42866UC3-EZ InterchangeableYes, the two Dexter hubs you mentioned part # 8-219-13UC3 and # 42866UC3-EZ are interchangeable. The difference is that the # 8-219-13UC3 has 9/16 inch studs and the other hub has 1/2 inch diameter studs.
view full answer... - Can Taskmaster Modular Wheel TA35ZR be Mounted to a Dexter Hub with Flange NutsYes, you could use flange nuts with wheel # TA35ZR but the hole size on this wheel is 5/8 and the hub and drum # 8-219-13UC3 has 9/16 inch studs. For a similar hub and drum with 5/8 inch studs you can use # 8-219-18UC3. It has the same bolt pattern and uses the same bearings and seal. It just has the 5/8 inch studs instead of 9/16.
view full answer... - Hub and Drum # 8-219-13UC3 with EZ Lube Grease Cap RecommendationYes, we do offer the Trailer Hub Assembly part # 8-219-13UC3 with the EZ lube grease cap. For that you would want the part # 42866UC3-EZ.
view full answer... - Brakes and Hubs for Rockwell American 7000lb Torsion Trailer AxlesThe two part numbers you mentioned are exactly the two Dexter part numbers you'd want! The brake assemblies part # 23-464-465 are a pair of self adjusting brake assemblies with a 7k capacity and then for brake/hubs you'd want the part # 8-219-13UC3.
view full answer... - Replacement Trailer Brake Assembly and Hub/Drum for 2019 Forest River Cedar Creek 37TRH 5TH WheelThe Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-465 is the replacement for your passenger side brake assembly. This matches what was put on by Dexter. The Dexter Trailer Hub and Drum Assembly # 8-219-13UC3 matches what was originally put on your 2019 Forest River Cedar Creek 37TRH, with one exception. You axle has the E-Z cap that you can either transfer to the new hub assembly.
view full answer... - Replacement Brake Magnet for 12 Inch Dexter Braking Assemblies Yes, the Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies part # AKBRKR-M12 which is the same as part KB12E-06 will work for you. The Dexter Trailer Hub and Drum Assembly part # 8-219-13UC3 that you referenced is for a 12" braking assembly so if this is the hub/drum that you have then the above magnet will work great for you.
view full answer... - What Size are the Studs for the Trailer Hub and Drum Assembly # 42866UC3-EZThe studs on the trailer hub and drum assembly # 42866UC3-EZ, are 1/2 inch-20. The assembly comes with lug nuts, bearings, grease seal, and a dust cap. The bolt pattern is 8 on 6-1/2. If you needed the same hub and drum assembly but with the 9/16 inch studs, use # 8-219-13UC3.
view full answer... - How to Choose a Replacement Dexter Hub/Drum AssemblyDexter hub drum assembly # 8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs. You can also identify compatible replacement hub/drums for your trailer by matching up a few characteristics from your existing set up. You'll need to match up the bearings used, the hub's bolt pattern and your axle weight rating. The linked photo shows the usual appearance of bearing part...
view full answer...
- Replacement Axle For Dexter 7K Axle With 78" Spring Seat WidthWhile we do not have your exact axle we do have the Axle # 8327834 you found with bare spindles. You can have two new springs Seats # TRSS300 welded on at your 78" measurement versus the 80" the axle comes with. Otherwise you are going to have to special order your exact axle from a local Dexter dealer. We do have the Brakes # 23-180-181 and Hub/Drum # 8-219-13UC3 to complete the axle. You would need 2 of the hubs as we sell them individually.
view full answer... - Correct Hubs/Drums and Brakes for a 2020 Montana High Country 380thThe correct hub/drum for a 2020 Montana High Country 380th is the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles part # 8-219-13UC3 and the correct brake kit is the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-464-465.
view full answer... - Hub Recommendation to Replace Lippert Hub 141290We don't have that exact part number but for basically the exact same hub except made by Dexter you'd want the part # 8-219-13UC3. This is the sam 6k-7.2k hub with an 8 on 6-1/2 inch bolt pattern that uses 9/16 inch studs just like the one you referenced. I attached a review video for this hub for you to check out as well.
view full answer... - Center Bore Diameter for Dexter Trailer Hub and Drum Assembly With 8 on 6-1/2" Bolt PatternThe pilot hole for your wheel will need to be 4-3/4" or more to be used with Dexter Trailer Hub and Drum Assembly # 8-219-13UC3. This is a lug-centric hub which uses lug nuts to secure the wheel to the hub and your wheel will need to have an 8 on 6-1/2" bolt pattern to work with the hub.
view full answer... - Replacement Wheel Stud For Dexter Hub & Drum 8-219-13UC3We do have the correct wheel stud for your Dexter Trailer Hub and Drum Assembly # 8-219-13UC3. This is a 9/16" bolt, and the correct replacement part is the following: - Drive-in Wheel Bolt for Trailer Wheel Hubs - 9/16" Diameter x 2-5/16" Long # 7-132 I verified with Dexter for you that # 7-132 is the correct part for this hub and drum.
view full answer... - Replacement Bearings for Dexter Parts 031-017-02 and 031-030-02I was able to cross reference the Dexter part number 031-17-02 to a # 14125A bearing and part 031-030-02 to a # 25580 bearing, and we do have these replacement parts with a grease seal in a complete kit for you. For a replacement bearing/race/seal kit, you'd use part # BK3-200, which includes the 14125A outer bearing, the 25580 inner bearing, the 10-36 grease seal and a replacement cotter pin. We do also have replacement hubs as part # 8-219-13UC3 and replacement self adjusting brake...
view full answer... - Recommended Replacement Brake Hubs and Brakes for a Dexter 7K AxleI wasn't able to find anything relating to that part number and since you're unsure of what you have I'd just recommend swapping the entire hub to make everything easier. You're just going to need to choose the hubs that have your current wheel studs. For 1/2" studs with a grease cap you'll want # 8-219-4UC3, For 1/2" studs with an E-Z lube cap you'll want # 8-219-4UC3-EZ, For 1/2" studs with an oil bath hub you'll want # 8-219-9UC3, For 9/16" studs with a grease cap you'll want # AKHD-865-7-1-K, For...
view full answer... - Suspension Enhancement For a 2021 Grand Design Momentum 353G With 7,000LB Dexter AxlesFirst I recommend the SumoSprings Trailer Helper Springs # SS26MV be added to your axles. As these are designed for a single axle you will need 2 of the kits. It seems strange that the springs would be damaged as they are not that old and are likely carrying a lot of weight. These helper springs will help relieve some of the weight and provide some additional support to your leaf springs. As they springs are progressive they also help to reduce a lot of the shock that is transferred through...
view full answer... - Availability of Replacement Trailer Hub/Drum 008-219 and Brake Assemblies 023-464We carry the hub you are looking for with our part number 8-219-13UC3 and then for brake assemblies # 23-464 for the left hand side and # 23-465 for the right hand side.
view full answer... - Wheel Stud Length on Dexter Trailer Hub and Drum Axxembly # 8-219-13UC3I went out to the warehouse and measured the studs on the Dexter hubs, part # 8-219-13UC3, and they're 2-1/2 inches long. So these should work great for your trailer.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Ryan G
Installed by:
Andy C
Video Edited:
Joshua S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sid
11/28/2023
Its been another year and these parts are still functioning flawlessly.