How to Choose a Replacement Dexter Hub/Drum Assembly
Question:
i need a hub drum kit for my trailer but do not see it listed with you guys. the Dexter number is K08-219-9C. the hub kit without drum is listed as K08-231-9B. Do you guys have either or both?
asked by: Joe B
Expert Reply:
Dexter hub drum assembly # 8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs.
You can also identify compatible replacement hub/drums for your trailer by matching up a few characteristics from your existing set up. You'll need to match up the bearings used, the hub's bolt pattern and your axle weight rating.
The linked photo shows the usual appearance of bearing part numbers. If you cannot get those part numbers you'll need to measure your spindles at the two points noted in the photo (the points where the bearings ride). The easiest way is to find the original bearing numbers. You'll also want to note your hub's bolt pattern. The linked article will be helpful if you are unsure. Last, you'll want to check the sticker or plate on your axle to confirm it's weight rating.
You can then use the linked page to match up your bolt pattern, bearing set and axle capacity to find suitable replacement hub/drums. Just click on the features you need. For example, if your axle is rated for 3500-lbs, you need a 5-on-4-1/2-inch bolt pattern hub with inner bearing # L68149 and outer bearing # L44649, then you can use part # 84546UC3.
Products Referenced in This Question
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Q&A: Will 6,000 lb Easy Grease Trailer Hub Replace Lippert Hub 814202
- Shop: Karrier ST235/80R16 Radial Trailer Tire with 16" Aluminum Wheel - 8 on 6-1/2 - Load Range E
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel - 8 on 6-1/2 - LR J - Black
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Q&A: Height from Mounting Flange to Top of Grease Cap of etrailer Hub # AKHD-655-6-K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Video: etrailer Trailer Hub and Drum Assembly Installation akhd-865-7-2-ez-k
- Video: Review of Kenda Trailer Tires and Wheels - Tire With Aluminum Wheel - KE39JR
- Video: Review of Dexter Trailer Hubs and Drums - Hub with Integrated Drum - 42866UC3-EZ
- Video: etrailer Trailer Hub And Drum Assembly Reivew
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-G-EZ-K Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-865-7-2-K
- Q&A: Compatibility of Dexter Drum Hub on Lippert Axle of 2017 Jayco North Point 5th Wheel
- Q&A: Hub Recommendation to Replace Lippert Hub 141290
- Article: How to Measure a Trailer Axle
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Search Results: 42866uc3~ez
- Search Results: dexter 8~219
- Search Results: 8~219~9uc3
- Search Results: dexter 010 036 00
- Search Results: dexter 010 010 00
- Search Results: dexter 8 219
- Q&A: Replacement Dexter Hubs For A Dexter K08-219-9B Axle Hub
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
on Trailer Hubs and Drums
