Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (413 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation was straight forward and no issues. Follow the instructions and you are all set.
This hitch does locate the receiver tube below the bumper facia so it is about 3-4 inches lower than a factory receiver which should be considered when choosing the ball hitch drop. Would recommend a zero drop or even a 1-2 inch rise to put the ball about the right height. But overall a positive review.
Holy heavy duty!! I went with Draw-Tite because I wanted the extra tongue and towing capacity. This thing is built super tough and exceeded my build quality expectations. I had it installed and torqued to the recommended xx lbs. within minutes. It comes with large fender washers to use as spacers if needed but I didn’t need them myself as it was a snug fit. You will definitely need to lower the full size spare tire for room to work and it will be a close fit once you crank it back up. I had to crank the tire 90% of the way up then push the tire as far forward as it would go to clear the hitch as you will see in the pics. I purchased and also installed the anti-rattle cover and wire connector mounting plate for the finishing touch. I would recommend this hitch and the accessories to anyone!
I installed the hitch and wiring kit in less than an hour by myself. It went together flawlessly. I would highly recommend etrailer to anyone looking for a high quality hitch or accessories!
I recently ordered and installed this product from etrailer. It seems very sturdy and well built. Etrailer was excellent to deal with, with an email on the status of my order about 15 minutes after placing it. Install was just a matter of dropping the spare tire and tightening four bolts. It does seem as if the hitch should have just a little more drop to it as it does pull on the bumper slightly but not noticeable unless you crouch and look at it. Overall excellent experience with etrailer and this product.
This Hitch bolted up fairly effortlessly. With my Jeep the rear cross member had a seam that seamed to have some built up weld on it or something that didn't quite let the washers, that came with the kit as shims, to work. Would have been nice to have some sort of clip on shim instead of the washers this would have been easier than trying to tape them in place. Over all my review is very positive, took me all of 30 minutes to install it. Got the wiring harness on order as well.
The service from etrailer is the best, bar none! Too bad you don’t sell insurance!
The Drawtite receiver is good quality with good install instructions and includes everything you need. The tools needed are a 19 mm socket and a torque wrench. I watched the etrailer install video and followed it verbatim alongside the tq settings in the included instructions. I coupled this receiver with Curt 4 pole wire harness ( non oem towing pkg) and it compliments the receiver nicely mis. I chose this receiver as I like the safety chain connection points better than the CURT option and so far it works well on the Girlfriends 2009 Jeep Grand Cherokee towing her boat.
Receiver arrived fast in a Heavy Duty very secure cardboard box. Hefty piece of steel with quality welds and nice thick paint job. Made In Mexico if that matters. Installation went smoothly, just as their online videos instructions presented. This DIY'er is Super Pleased!
every thing about the hitch installation is correct went very fast and was super easy. The only thing that I would like to point out is the removal of the standard J tow hook that comes stock with teh commander. You have to remove the cross brace for the J hook. The cross brace ties driectly into the rear frame where the tow hitch needs to go. The bolt that you need to take out has to be removed from the BUMPER SIDE that is the very rear end. You can not remove the nut because the nut is welded onto the cross brace.
Just installed the hitch on my 2010 Jeep Grand Cherokee Laredo. Fit great and was relatively easy to install. I installed by myself and had almost no trouble, very straightforward. The only issue is that the plastic rivet clips on the bumper won't line up to be reattached to the frame after the job was done. This however really poses no problem, the bumper is secure against the hitch even without the rivets and does NOT rattle, and looks just as it did prior to the job.
Easy install as I didn't have tow hooks that needed to be removed. I was able to install it solo in about a 1/2 hour. The bumper fascia touches the hitch slightly but not an issue at all.
Probably the easiest hitch to install. The video provided on the website explained things very well. Shipping was very fast as well.
Super strong receiver and with the video instructions from etrailer installation went without a hitch, pun intended.
nice trailer hitchtrailer hitch looks more heavy duty than I thought it would be install took about 45 minutes but its winter in its cold
Installation was easy and hitch has great appearance. It took about 40 mins to install and installation instructions were very helpful.
This hitch was very easy to install with an extra set of hands to pull the plastic bumper out while putting the hitch in place. Had it completely installed in about 10 minutes.
Everything came in on time, nicely packaged and easy to install.
My husband and 6 year old son installed the hitch in about 15 minutes without having to remove the bumper.
Order this hitch great product fit just like they said it would. Took only shot while to install would recommend to any one. Etrailer was great just order more from them and will us them again
Very simple product. Directions were very clear. My car did not come with a hitch which was frustrating so I was happy to find such a convenient solution. Also, everything came on time or earlier ( ordered two products). All in all, I’m very happy with my purchases.
Delivery was quick. 3 days to receive. Installation was easy. Installed with my 13 year old son. Took about 20 minutes. Seems solid. I added some enamel paint over the bolts for corossion protection. Good to go.
Super easy Installation. Exact fit with ALL necessary parts and accessories included. Outstanding customer service and exceptional communication from eTrailer.
Very easy to install, fits perfectly, and is great quality. Great communication from the etrailer staff as well. Will be recommending etrailer to friends and family.
Easy to install and held bikes well … I have not taken it out on the highway but is very sturdy. Videos of installation were excellent and really enhanced my ability.
Recieved hitch fast , was simple to install , had to remove smaller hitch and install new one total job 30 minutes
Ordered a hitch for my sons Jeep service was great and so was product!!
came really early
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
5/2/2021
The Hitch worked great on my 08 Grand Cherokee and installed easy with the help of the videos. This hitch is built very well and looks like it could pull a train!! You definately need to lower your spare tire to install if you have a full size spare in order to install the hitch. When you crank the spare tire back into position the hitch just barely clears the tire but its not touching so youre all good!