Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (71 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.This was a easy an install as I've ever had it took me longer to drop the spare tire than it did to bolt up the hitch and that includes clamping the rear bumper. It blends in with the bumpercolor great! Would absolutely recommend this and it showed up a day early
I ordered 2 days ago and installed it today. After watching the video the installation was very easy. I'm 67 years old and did it by myself in less that 20 minutes. I used two visegrips to hold the bumper on and a jack stand to hold up one end while I bolted the opposite end. The hardest part was trying to generate the 196 ft lbs to torque the bolts. GreT service with great products.
John C.
3/12/2024
Still working great and looking fine.
Jerred H.
3/12/2024
Seems good quality and very easy to install, but the hitch had Marks and scratches like if it was installed and then returned.
Brooke M.
5/4/2024
I can see what you mean about the scratches in the photos you sent. I used to work in the Returns Department here at etrailer, and I can assure you that this hitch has not been previously installed. There would be very deep grooves from lock washers and hardware. But your hitch is still scratched up! I will send your information to our customer service team and have them contact you about what can be done.
Great hitch. Arrived on time, very easy to install. It took about 30 minutes with the help of my neighbor. I highly recommended etrailer.
Peyton verified what I needed and it was sent out the same day, even arrived by UPS a day early. I saw it took most people 30 minutes to install, me, 3 hours. Spent 2 1/2 of those hours at Home Depot buying a breaker bar for the bumper bolts. Actual time was about 30 minutes. Matte finished matched the rear bumper perfectly.
Hitch appears to be similar in quality to more well known names. Instructions were easy to follow and took about 15 mins to install. The hitch receiver arrived with some scuffs, even though it was well packaged. No affect on the performance just odd since it's brand new. Time will tell if the finish holds up.
Katrina B.
7/22/2022
Im sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Fish0n
7/18/2023
Solid product, finish is holding up well and I would purchase again.
Product is geeat. Got on your website to get install video.no issues, except factory installer at Ford over tightened the 4 bolts and they were hard to get loose. I followed your instructions that came with hitch for torque setting. Thanks
Ordered on Sunday, arrived on Wednesday. Installation went just as shown in the video. I did by myself and used two 5 gallon buckets to hold the hitch while I bolted it up. I did have to loosen the spare tire and move it forward an inch or so so it wouldn’t rub on the hitch.
Fit the truck carpet very easy to install best company in the business
Great hitch.Easy to install
Robert
9/7/2023
No problem with the hitch.
Mike L.
10/31/2023
On in 15 minutes, delivered early. Very Happy!
Kimberly
12/4/2023
Great, no problems. I haul trailers 2 or 3 times a week with this.
Package was full of staples where holes in the cardboard occur and taped together where the box was ripped. Contents were in excellent condition dispute the above issues
I assume this is almost identical to several competing products, except for having a matte finish which I think most would prefer to gloss. It's at the right price, and quick delivery. Very easy to install if you have the right tools.
The hitch is as described and as expected. It went on my Ranger easier than expected. Four bolts and was a breeze. Is manufactured to accommodate the vehicle. It was also received a couple days earlier than expected or promised.
Thanks again for the good product and service.
High quality unit that fit right in with no issues. Use a breaker bar with 1/2" head and 13/16" deep socket to easily achieve the 196 ft-lbs for the 4 bolts. That's all there is to it. Clamp the bumper, remove all 4 bolts, place hitch underneath, replace 4 bolts and torque to 196 ft-lbs - which is about a 2-handed, full body lean with a standard breaker bar that is about 12" long. I used red loctite on 2 of the 4 bolts and I could tell the difference so I recommend using the loctite - the 2 bolts with loctite felt smoother on the bar.
quality made and a snap to install
Quality piece, thick gauge steel with strong neat welds. The matte finish powder coat has a slight texture to it that looks really great.
Greg G.
8/24/2023
The hitch is really holding up well after one year of use. the powder coat finish still looks great with no rust.
great service
This is the 4th trailer hitch I have bought from etrailer, this one by far was the easiest to install. I was able to get it installed in 20 minutes on my own. The installation did not require me to take the whole bumper apart as I would have had to do if I purchased a trailer hitch from Ford.
Easy installation, worked out well.
Trailer hitch fit the Ranger pickup and it is heavy enough to do its job. Good buy!
Very nice unit and easy to install
I've ordered quite a bit for me trade over the years I never been disappointed good products and good customer service
Carl
11/26/2022
Great no problems with it at all thats why I ordered for me trailer
I watched the video on how to install and it was perfect and the hitch fit perfect. It took me about 1/2 hr to install by myself. Would probably have taken a lot less tome if I would have had some hold it up while putting the bolds in
Thank you for your excellent video and perfect merchandise
Plug and Play, very nice!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dennis
4/21/2023
after a year I have used this almost constantly I am very satisfied with the solidness of the hitch it still looks new