THIS ITEM IS NOT A FIT FOR
2016 Ford Edge
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # 36408
Retail:$249.98
Our Price: $156.25
You Save: $93.73
2016 Ford Edge
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (256)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 36408
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 300 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 300 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
36408 Draw-Tite Class 2 Trailer Hitch Receiver
90145 Hidden Hitch Class 2 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2005 - 2017 Chevrolet Equinox
- 2010 - 2017 GMC Terrain
- 2006 - 2009 Pontiac Torrent
- 2002 - 2003 Saturn Vue
- 2004 - 2007 Saturn Vue excluding Red Line
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Missing parts
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36408
Average Customer Rating: 4.8 out of 5 stars (256 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Michael 03/10/2024
Great service. Fits awesome. Multiple purchases there
by: Michael12/05/2023
2012 Chevrolet Equinox
Hitch installed very easy and was of excellent quality. Only issue was that the bolts were the wrong size for the factory installed nuts. Hint to anybody installing:Put a penetrating oil in the factory nuts, then clean them with a wire brush (gun cleaning brush or plumbing brush), then run the bolts in and out prior to holding the hitch in place. I saw some comments that the spring bolt wires were too short, but they are just fine. This issue must have been corrected by the manufacturer.
by: Jeffery 03/21/2024
Had to purchase 4 bolts to mount sides of hitch into welded nuts in the frame of the car
by: Alan L02/14/2017
2017 Chevrolet Equinox
I bought this hitch in order to use a hitch-mount bike rack. It was pretty easy to install. I used some ramps to get more ground clearance for installation and had help from a friend. it is a clean looking unit, nothing ugly sticking out. The installation video was very helpful to watch before we did it.
by: Doug07/09/2019
2017 Chevrolet Equinox
This hitch is perfect for my Kuat bike rack. The finish is very high quality, installation was easy, and it looks great on the vehicle. It tucks up in the body perfect.
Doug B.
7/10/2020
This hitch has been excellent, and my Kuat rack too, hard to beat this combo!
by: Randy Weber06/01/2016
2011 Chevrolet Equinox
Very pleased with the Drawtite hitch and alternate wiring harness I ordered for our 2011 Equinox. The hitch install took less than fifty minutes and I was pleased that everything lined up and bolted together with no difficulties. The wiring harness installed in less than 10 minutes. Reviewing the Video's on your web site were a huge help when it came to the wire harness. By ordering everything from your company saved us 400.00 from a dealer install.
by: Tom 04/08/2017
Excellent! I could not be more pleased. The hitch arrived quickly and was well-packed. Installation was a breeze. The installation video was spot-on accurate and helpful. All the parts and instructions needed were present. The wires for threading the bolt and metal part into the bumper were exactly the right length -simple, fast and easy to do.
The receiver hitch itself appears to be very well made.
Even though the vehicle looks fine with the little hitch trim door removed, the instructions included details on how to cut the little hitch trim door to fit around the hitch. I did it and put the little trim door back on - wow! It looks great - an unexpected bonus.
Thank you to the folks at etrailer. I am a very pleased customer!
by: Mark 10/27/2023
EASY INSTALLATION AND DRAW COVER LOOKS GREAT.
by: Berny D.07/14/2011
2011 GMC Terrain
installed this Hitch (#36408) on my 2011 GMC Terrain the next day (7/6/11) and all went very well except that I had to bend the passenger-side upright support about one inch outward, in order to fit in place and bolt in.
The hitch may have been dropped on that side during shipping and was sticking out from the carton, but I was able to straighten it out to fit...all is perfect!
by: Derek Webb08/12/2016
2012 Chevrolet Equinox
Great Hitch. My wife and I purchased this hitch specifically for mounting a bike rack on our 2012 Chevy Equinox 2LT. I ordered it Aug 9th and received it Aug 11th via 2 day shipping. There are six easy bolts that were extremely easy to install. The hardest part was holding it up. Strongly recommend you install with a partner so there's no chance of stripping or breaking bolts from stress. Some models do not already have all the holes needed but there is extra hardware for this. Fortunately ours was equipped with all 6 holes and I installed it in about 25 minutes with my wife's assistance. It's very stable and neat. Also, ensure you do it right and torque it within. Very happy with this purchase.
by: River Rat Canoe Trailer05/25/2013
2013 Chevrolet Equinox
Installation was a Breeze, no help, completed myself. Product ultra durable, easy to install, looks great. Pleased with how everything lined up well. Pull wire to feed block and bolt through bumper frame needs to be 6" longer. Only complaint. Used a coat hanger to add length. Would recommend if you want a hitch...and don't want to get ripped off at a dealer.
by: Gregory06/06/2018
2013 Chevrolet Equinox
On time delivery. Concern as to package condition upon receipt alleviated as all parts were accounted for and in operational condition. Installation was easier after watching videos from website. Printed instructions not very clear. All in all an excellent product at a very good price. Thank you.
by: James E03/19/2017
2011 Chevrolet Equinox
Easy to install.. Works great for my thule t2 bike rack.
by: Erik V.05/15/2014
Hitch installed perfectly! No issues what so ever. I don't know who invented the wiring harness but they are a genius! I've never wired up a car so easily. It literally took me maybe 10 minutes start to finish.
by: George03/14/2023
unfortunatly I have been unable to put the hitch to use. Unforseen events, the hi temoertures and a few other things did not give me the opportunity to trailer my boat to go fishing. I hope this year will ndifferant & try out the hitch. That being said, the product & the installation & instructions were just great & that's a good thing. I will return with an upgrade in the future to give va response to you
by: Glenn06/02/2018
2015 Chevrolet Equinox
Needed an M12 x 1.75 tap to clean out the rusty nuts welded on the Equinox. After that, install was a breeze. Hitch looks great!
by: Charley M.06/24/2016
2016 Chevrolet Equinox
Received package sooner than I expected, which was great! It had all the items required for fast easy installation, and after seeing a you tube video on this, it took about 10 minutes to complete. Everything fit perfectly. Super happy with this product!
by: Brandon08/17/2023
2015 GMC Terrain
Check the bolts, had a hell of a time finding the correct size bolts for my terrain when it said it would fit. Apart from that it's great
Katrina D.
8/21/2023
I am sorry that you had a hard time finding the correct size bolts. This hitch should have come with a complete hardware kit and the installation instructions for your GMC Terrain. Did you not receive the correct hardware with your hitch?
by: Harold M.04/27/2011
Fast delivery and easy installation...Perfect fit with all the necessary hardware. Very easy to do business with....Thank you...H.
by: John S.10/03/2017
2017 GMC Terrain
We needed a hitch for our new 2017 Terrain to haul our bike carrier and maybe a small boat. Searched and found the best price at etrailer. Great looking hitch and perfect fit. Less than an hour to install and am very pleased with my purchase.
by: Larry P04/02/2016
2013 GMC Terrain
I purchased the Draw-tite for my 2013 Terrain to use with a small trailer for yard work etc. I was surprised how quick the part showed up and the free shipping was great. I watched the video on installing it which helps. They indicated using a round wire brush to clean out the weldnuts and this is a must, especially if you live in the North. I spent time cleaning them and sprayed some oil in them and then ran a bolt in each nut to make sure the bolts would go in easily when I started the final ass'y. I used a floor jack to hold the hitch in place while I put in the four side bolts. I then pulled it out and installed the center bolts. I didn't tighten the bolts until I had all 6 in place. The product looks great on the SUV, it's tucked under the bumper so all you see is the receiver for the ball & drawbar.
Larry P.
2/13/2018
I was surprised to get your follow up on the Draw-Tite hitch. Im still very satisfied with the product and have recommended it to others.
by: Mel05/12/2019
2017 Chevrolet Equinox
I absolutely love dealing with etrailer.com. The hitch I purchased for my wife's new (to her) 2017 Chevy Equinox came a day earlier than estimated by etrailer. I had it installed the same day. The only problem I encountered was trying to thread the nuts on the center bolts in the bumper. My hands didn't seem to fit, and I had a devil of a time trying to thread them on, all the while fearing I would push the bolts back up into the bumper and lose them. I love how the hitch fits up under the vehicle, almost out of sight.
This is the third hitch I have purchased from etrailer and have yet to be disappointed. I would recommend the products they carry and their service to anyone and everyone.
Mel
5/13/2020
Unfortunately, the wife traded her Equinox back in March of 2020. So I technically cant comment on performance 1 year later. However,for the 10 months we used the hitch,it performed without a hitch. Definitely recommend e-trailer.com to anyone looking for towing products. 5 star customer service.
by: Mary T.08/25/2016
2013 GMC Terrain
Purchased the trailer hitch for our 2013 Terrain and it went on like a charm. Instructions were very CLEAR and easy to follow. Even attaching the light wiring was far easier than I anticipated. We liked it so much that we have gotten rid of our old bike carrier and purchased a hitch mounted bike carrier from you. It also fits perfectly.
Mary T.
8/25/2017
Still doing well. performing as advertised
by: Robert S12/03/2016
2017 Chevrolet Equinox
Just purchase a new Equniox 2017, I had bids in at $400-$500 to get the hitch installed.
I decided to go with this purchase because of price and the video's which show me exactly how to do it.
One trailer place quoted me $100 to do the install of the wire harness ... it took me 20 minutes... that means he was charging me $300 an hour to do the electrical and then he wanted $10 per bolt to do the install of the hitch.
I forwarded them your Web site address and told them they should start doing business with you!
They Email me back thanking me for the information!
Robert S.
12/3/2017
One year later... Everything works GREAT!
by: Joe H.01/15/2013
2013 Chevrolet Equinox
Extremely fast delivery and excellent communication from Etrailer folks. Directions need minor correction. We have a 2013 chevy equinox and we needed to use the pull wire tool to attach center bolts as the equinox bumper did not have threaded holes ,need to attach as if bumper was from a Saturn. Maybe when GM dumped the Saturn line, they are using some old bumpers on their Chevys and not telling anyone??? But other than that ( and threading the bolts through the bumper can be alittle tricky, i used thicker wire than provided and was alot easier to do), the hitch is farely easy to install and is quality . Joe H. Pittsburgh, PA.
Joe H.
7/22/2014
Hi Patrick, all is well, we use the hitch for a bike rack, and its working fine. Thanks for the followup.
25
262
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Troubleshooting Hitch Install Bolts that Won't TurnWe installed the # 36408 on a 2012 Chevy Equinox just like yours and the install bolts that came with it did end up fitting just fine. The problem you are experiencing has to be related to the weldnuts of your vehicle being dirty/corroded. Normally using a tap like you said you tried will clean them out. I attached a couple helpful links on cleaning weldnuts for other ideas that you can try.
view full answer... - Trailer Hitch and 4-Pole Trailer Wiring Harness Recommended for 2013 Chevy EquinoxFor the hitch, the Draw-Tite Class II # 36408 hitch is a fit, but for about the same cost, you can get the Class III etrailer model with the more popular 2 inch receiver, part # e98865. Whenever the choice is available, I'll always recommend going with the 2 inch receiver, as there are many more hitch mounted accessories available. For a 4-pole trailer wiring harness, I'd recommend the Tekonsha # 118494. You'll also need a ball mount and a trailer ball. If you go with the Class II # 36408,...
view full answer... - Availability of an Anti-Rattle Device For a 1-1/4 Trailer Hitch on a 2005 Saturn VueHitch, ball mount, and/or accessory rattle can be annoying and it is a common ailment. Luckily, there is a cure. First, you can make sure that your trailer has the correct tongue weight. Tongue weight should be 10 to 15 percent of gross trailer weight when it is loaded and ready to tow. If tongue weight is correct, you can use an anti-rattle device. I recommend the Anti-Rattle Wedge, # RM-061-125. It is designed to fit in 1-1/4 inch trailer hitches like # 36408 on your 2005 Saturn Vue....
view full answer... - Recommended 2-Inch Class III Hitch for 2010 GMC TerrainGiven the age of your 2010 GMC Terrain you can safely assume that there will be rust and/or dirt trapped in the threads of the weld nuts on the frame. You can use a spray lubricant product like WD40 or PB Blaster along with a stiff bristle brush to clean them. We have a helpful article linked for you to guide you through this process. It often takes more than one application of lubricant and multiple brushings to remove all the material from the threads. It is best to apply the lubricant...
view full answer... - Trailer Hitch that Fits 2020 Mini Cooper Convertible with Single ExhaustThe EcoHitch part # 306-X7290 is a fit for your 2020 Mini Cooper Convertible with single exhaust. I would not need your VIN to verify this. I attached an install video for this for you to check out as well.
view full answer... - Towing Capacity and Recommended Hitch for 2004 Nissan Altima 2.5 SLAccording to the owner's manual, your vehicle has a 1000 lb towing/100 lb tongue weight capacity. You'd need to ensure the trailer weight and tongue weight (amount of downward force exerted on the trailer ball) don't exceed those capacities. I'd recommend the Curt Class I trailer hitch, part # C11264. To complete your towing system, you'll also need the following: Hitch Pin and Clip # PC2 # 3592 ball mount Trailer wiring harness, part # C59236 1-7/8 inch trailer ball, part # 19256 or...
view full answer... - Hitch and Accessories for Towing Dirt Bikes on Trailer With 2010 Chevy EquinoxThe Draw-Tite Class II Trailer Hitch, item # 36408, would work great for towing a small trailer, as long as it does not weigh more than 3500 lbs (trailer + load). However, I usually recommend that people at least consider going with a Class III hitch when they have the choice. A Class III hitch, like item # e98865, would allow for greater flexibility in the future, as you will have a better selection of accessories, such as a cargo carriers and bike racks. You'll also need a trailer wiring...
view full answer... - Towing Capacity of 2012 Chevy EquinoxIn my research, I found that the towing capacity for models with the 2.4L 4 cylinder engine is 1500 lbs, while models equipped with the 3.0L 6 cylinder engine have a 3500 lb towing capacity. I've confirmed this information with the owner's manual.
view full answer... - How to Clean Rusted Frame Weld Nuts to Install Trailer Hitch on 2013 Chevy EquinoxThe Draw-Tite # 36408 Class II hitch you referenced uses 4 M12x1.75 bolts to attach to the nuts welded into the frame. If they are corroded, and spraying them with a spray lubricant like PB Blaster and using a wire brush like one on a battery terminal cleaner like # DW00254 hasn't done the trick, you'll need to re-tap the threads. We offer a tap wrench set, part # PT22FR that includes an M12x1.75 tap. Before attempting to run the tap through the threads, be sure to hit each nut with a good...
view full answer... - Can I use the Class II Hitch From my 2014 Equinox for my New 2019 Equinox if not What is RecommendedI'm sorry but the Curt Curt Trailer Hitch Receiver part # C12291 and the Draw-Tite Trailer Hitch Receiver part # 36408 the two class II options for your vehicle only go up to the 2017 model year for the Chevrolet Equinox. For your 2019 I recommend the Curt Trailer Hitch Receiver part # C98CR and if you need wiring the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118750. Both of these are custom made and confirmed to fit you 2019 Chevrolet Equinox.
view full answer... - What Vehicles Does Draw Tite Hitch # 36408 FitThe Draw Tite Hitch part # 36408 fits the following vehicles: 2005 - 2017 Chevrolet Equinox 2010 - 2017 GMC Terrain 2006 - 2009 Pontiac Torrent 2002 - 2003 Saturn Vue 2004 - 2007 Saturn Vue excluding Red Line
view full answer... - What is Bolt Size for Draw-Tite Trailer Hitch Receiver # 36408The bolts included in the Draw-Tite Trailer Hitch Receiver # 36408 for your 2005 Chevrolet Equinox are M12-1.75 x 40mm. If you are having trouble with the bolt starting in the threads of your weld nuts, most likely there is still some dirt or corrosion in the weld nuts on your vehicle, even after cleaning them. I have attached a helpful article that lists a step-by-step process for cleaning out the weld nuts as this is not an uncommon problem.
view full answer... - Which Trailer Hitch Will Be Least Visible on a 2011 Chevrolet EquinoxAll the hitches we offer for your 2011 Chevrolet Equinox have similar designs, and they are actually going to fit in nearly the same location. There is a center panel in the center of your vehicle bumper that will be removed for the hitch installation, and the hitch receiver opening will fit up into the space that is left when the panel is removed. Because of this, the hitches for your vehicle are all going to be mostly hidden. The same hitches that fit your vehicle also fit some similar...
view full answer... - Hidden Hitch Recommendations for a 2013 Chevy EquinoxThere are two Hidden Hitch brand hitches available for your 2013 Chevy Equinox, both of them are confirmed to fit your vehicle. The Hidden Hitch # 87572 (no longer available) or the Draw-Tite # 36408 would work great for your Equinox. If I were you I would go with the # 87572 since it is a Class III hitch with a 2 inch opening that will have a larger carrying capacity and have more options for hitch accessories. I attached an FAQ article on hitch classifications also for you to check out...
view full answer... - Availability of Bike Rack To Fit on 2005 Chevrolet Equinox With Factory SpoilerThule does list the Thule OutWay 2 Bike Trunk Rack, part # TH45JV, as a fit on a 2005 Chevrolet Equinox, and it clarifies that it works with all models. The directions say to place the top clips in the gap at the front edge of the top of the hatch. I would check your vehicle and determine if the top clips can attach to the top edge of your hatch without touching the spoiler. If the straps can attach without interfering with the spoiler you should be able to use the trunk bike rack and Thule...
view full answer... - Will the Draw-Tite Class II Receiver # 36408 Fit The 2010 EquinoxI spoke with my contact at the manufacturer and have confirmed that the Draw-Tite Class II receiver, part # 36408 will indeed fit your 2010 Chevy Equinox. Some items you may need with the Class II hitch are as follows, Drawbar # 36051, Use in rise position only. Pin and Clip # PC2 Ball # 19256 or # 19258 Wiring Harness # C56012 Hitch Lock # e98879
view full answer... - Replacement Hardware for Trailer Hitch on 2013 Chevy EqinoxThe correct hardware will depend specifically on the hitch you have for your 2013 Chevy Equinox. For any hitch we do have replacement hardware, the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. Simply enter the hitch number in the "Hitch Item Number" box and select the manufacturer from the drop-down...
view full answer... - Towing Capacity and Trailer Hitch and Wiring Recommendations for a 2012 Chevy EquinoxI checked the owner's manual for the 2012 Chevy Equinox and found that models with the 3.0 Liter motor like yours can tow trailers up to 3,500 pounds as long as they have trailer brakes. The other number that stands out is the GCWR or gross combined weight rating. This is the most that the trailer and the vehicle can weigh together including any cargo, fuel, and passengers. For front wheel drive models the GCWR is 7,937 pounds. For all wheel drive models the GCWR is 8,157 pounds. Towing...
view full answer... - Recommended Curt Class III Receiver and SportRack 3-Bike Rack for 2011 GMC TerrainAlthough some Class II receivers are offered for your Terrain, I always recommend going with a Class III whenever the choice is available. Although the greater capacity is not that important to you, the 2 inch receiver that the Class III uses is much more common, therefore there is a better selection of hitch mounted accessories like bike racks or cargo carriers available for the 2 inch receiver. The etrailer Class III Receiver, part # e98865 is our most popular hitch for your Terrain and...
view full answer... - Adding a 7-Way and Brake Controller to a 2012 Chevy EquinoxIt means that the vehicle, when properly equipped, can tow a trailer that weighs up to 3,500 pounds. If your 2012 Chevy Equinox is a model that is rated for 3,500 pounds then you will not have a problem towing a trailer weighing up to 3.052 pounds. Usually to reach the maximum capacity you will need to have a trailer with electric brakes and use a brake controller to activate them. We do have the parts you will need for this. First you will need to install a 4-Way trailer connector, #...
view full answer... - Troubleshooting Hitch Hardware that Doesnt Want to Thread into Vehicle WeldnutAll of the install bolts that thread into an existing weldnut on your 2007 Chevy Equinox are the same size, M12. There are other size bolts that come with the # 36408 that has been confirmed as a fit for your vehicle. They are 1/2-13 and they do not attach to weldnuts, instead they attach to nuts that come with the hitch. Most likely what is going on is that you have dirty or rusty weldnuts and the bolts are not wanting to thread all the way in. This is very common on vehicles that have...
view full answer... - Does etrailer.com Offer Hitch InstallationWe certainly do! If you live nearby, or will be traveling near the Wentzville MO area, we'd be happy to install a hitch for you. Give our Customer Service folks a call for an appointment or for more details.
view full answer... - Does Fish Wire Come With Hitch Installation Kit?Typically, our hitches will provide the fish wire with the hitch depending on the installations needs. I looked at all the hitches for your 2013 GMC Terrain and all show a fish wire included in the instructions. If you need replacement wire or find a hitch that doesn't include it but you think it would be handy to have we do have several option right here on our website. I have included the link to all the fish wire applications for your convenience.
view full answer... - How to Pick Out Correct Rise/Drop Ball Mount for a Class II Hitch Installed on a 2015 GMC TerrainIn order to pick out the correct rise/drop ball mount for a towing setup you want to pick the ball mount that will allow your trailer to be towed as level as possible. Since trailers are made with various heights there is no one single ball mount that would work for every application. Instead you will need to take a couple measurements on your trailer and tow vehicle so that you can pick out the correct one for you application. Check out the FAQ article I attached for more info on how...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Shane H
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Alan L.
2/14/2018
Works great! Still solidly mounted and gets plenty of use.