Recommended 2-Inch Class III Hitch for 2010 GMC Terrain
Question:
Question: am VERY interested in hitch for 2010 GMC Terrain. . Am a little nervous about the holes being possibly rusted havent really checked. I wanted to know if you could send me 1 bolt to do the Test threading into the 6 holes after i clean them to be CERTAIN that the bolts will not be an issue before I purchase the hi
asked by: Eliezer
Expert Reply:
Given the age of your 2010 GMC Terrain you can safely assume that there will be rust and/or dirt trapped in the threads of the weld nuts on the frame.
You can use a spray lubricant product like WD40 or PB Blaster along with a stiff bristle brush to clean them. We have a helpful article linked for you to guide you through this process. It often takes more than one application of lubricant and multiple brushings to remove all the material from the threads. It is best to apply the lubricant and allow it to soak in before using the brush.
The hitch I recommend for your Terrain is the 2-inch Class III etrailer model # e98865. This offers better compatibility with hitch-mount accessories like bike racks and cargo carriers and it has a much higher weight capacity than the Class I model # 36408. An installation video showing a Terrain is linked for you along with the written instructions. No drilling is required.
If you want to try fitting one bolt you can locally source one with these specs: M12x1.75x40 hex bolt.
The hitch comes with all required hardware.
Products Referenced in This Question
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of Replacement Control Module for 694654
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How To Test for Bad Controller on Lippert Ground Control 3.0 Electric Leveling System
- Q&A: How Much PSI Should I Put In a 4.80 x 12 Trailer Tire
- Article: How Much Trailer Can I Really Tow
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Frequently Asked Questions About Transmission Coolers