Availability of an Anti-Rattle Device For a 1-1/4 Trailer Hitch on a 2005 Saturn Vue
Question:
THERE IS A RATTLE BETWEEN THE CLASS II DRAWBAR AND THE HITCH WHEN I AM PULLING A TRAILER. SEEMS TO BE A GOOD FIT WITH HITCH AND WITH THE LOCKING PIN. DO YOU HAVE ANY SUGGESTIONS? THIS IS VERY ANNOYING. OTHER THAN THAT THE HITCH WORKS GREAT.
asked by: JOHN F
Expert Reply:
Hitch, ball mount, and/or accessory rattle can be annoying and it is a common ailment. Luckily, there is a cure. First, you can make sure that your trailer has the correct tongue weight. Tongue weight should be 10 to 15 percent of gross trailer weight when it is loaded and ready to tow.
If tongue weight is correct, you can use an anti-rattle device. I recommend the Anti-Rattle Wedge, # RM-061-125. It is designed to fit in 1-1/4 inch trailer hitches like # 36408 on your 2005 Saturn Vue. When the wedge is tightened, it pulls the ball mount to the side of the receiver tube and holds it there so it cannot rattle.
Products Referenced in This Question
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Fits 1-1/4 Inch Hitch
- Clamp Style
- Accessory Anti-Rattle
- Towing Anti-Rattle
- Roadmaster
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Troubleshooting Trailer Hitch Bolts Too Big for Weld Nuts on Vehicle
- Q&A: Trailer Hitch Hardware is too Large to Fit Weld Nuts on a 2013 GMC Terrain
- Q&A: Why Would Trailer Hitch Install Hardware be Hard to Thread into Vehicle Weld Nut
- Q&A: What Size Bolts Does the Trailer Hitch for a 2014 Chevy Equinox Use
- Q&A: Maximum Towing Capacity For A 2.4L L4 2014 Chevrolet Equinox
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How Much Trailer Can I Really Tow
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Tow Trailer with 2012 Buick Enclave
- Article: Trailer Wiring Diagrams