Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Straight trailer idler axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" wheels. EZ-Lube spindles for simple lubrication.
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (359 Customer Reviews)
Straight trailer idler axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" wheels. EZ-Lube spindles for simple lubrication.
This axle kit made it fairly easy to rebuild my trailer. The pictures show what I started out with for a trailer and what the finished trailer looks like.
Fit right on the trailer and works fine
I wish I had called you first. It would have saved me time, money and aggravation of messing with that old worn out axle.
very prompt delivery. Product was as promised and delivered in good packaging
The product was exactly what I needed to repair my trailer. It was easy to select
the right part. Ordering was quick and easy. It was shipped out the same day
and I had it delivered the third day. The price was good and the freight was free.
Product came as ordered. Well packaged with ample covering on both ends of axle to prevent damage during mailing. Came with new castle nuts which I hadn't expected.
I emailed a question about installing the bearings and got a quick response with a video attached. Did the trick.
Installation was not difficult. I was able to do the install by myself (though they are right that a second pair of hands would have been better).
Just recently installed so not enough miles to make a long term judgment as to how axle will hold up, but so far, so good.
Would recommend both the product and the support staff.
The axel and tires and wheels are excellent. Mostly, the website is an excellent resource for trailer parts. I have recommended the site to others numerous times.
DT
My review has nothing against etrailer. Shipping was great! My issues is about the Dexter axle. I have a 6x8 Tractor Supply trailer and it need a new axle. It had a dexter axle in it and on the label had 58-72. I measured it and it was what it's labeled and ordered a replacement 58-72. I went to install it and the spring perches were not 58. It was about 3/4" shorter than 58". I had to notch the spring perches to be able to center the axle. It all worked out in the end but still a small hassle.
I replaced my worn out axle with this order and had no problems. I Really liked the videos that showed the installation. I'm greasing this hub more often now.
Fast shipping and excellent products. The axle and hubs were easy to install and have served me well for a year now. I anticipate many years of service from this setup. A+++++
The product was just as described and it worked great for my boat trailer
I dealt with Chrystal; very helpful and professional. The trailer parts arrived promptly and in good condition. I would buy from etrailer again. Today I ordered steel and will begin building a 5X8 utility trailer.
I have bought a number of things from trailer over the years and most recently a new axle for a little utility trailer. The products and customer service have always been great.
Great service, helped me correct my screw up the first time. Shipping was fast, and the packaging was excellent. The product was exactly what I needed to repair my trailer.
Great product at a great price! Quick shipping and service to back it up.
Henry
10/2/2021
Works like a champ!
Despite the supply issues were able to fill my order when needed. Thank you
It is a good product came fast and was easy to put on
Awesome service I received my order in 2 days in NC with free shipping and everything fit perfect I will definitely do service with you guys again thanks a bunch
Very pleased with how this axle works.
Works great! No issues.
Great service, especially helping me correct my screw up the first time. Shipping was fast, and the packaging was excellent.
Great axle
Product arrived as described and it was delivered to a remote address. Very pleased so far.
Fast shipping, worked well
Do you have a question about this Trailer Axle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dennis B.
2/8/2018
The axle was perfect. The service great. Instructions were right on. My trailer is like a new on. I an very pleased, excellent would recommend to anyone.