The Reese Quick-Install Custom Bracket Kit part # RP50087 that you referenced is just for the frame brackets. In order to install a 5th wheel hitch you will need both frame brackets and base rails, the Reese Quick-Install Custom Installation Kit part # RP50087-58 which is a fit for a 2017 Ford F-150.
The Reese Quick-Install Custom Installation Kit will work with brands such as Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky or any brand that uses the industry standard mounting rails... view full answer...
Though I'm not quite sure what you mean by "what are the dimensions" in reference to Draw-Tite Max-Frame Trailer Hitch # 75852, I can tell you that this hitch will fit all models of 2019 Ford Transit Connect, so if that's what you have it will absolutely fit your vehicle!
I have added a link to the installation instructions as well as an install video for you to check out of this hitch being installed on a Ford Transit Connect. For towing you will also need a wiring harness to power your... view full answer...
The Advent Air RV Air Conditioner part # ACM150C installs into a 14-1/4" long x 14-1/4" wide roof opening. If you remove the skylight and the opening is smaller than 14-1/4" long x 14-1/4" you can carefully cut the opening to make it larger, however it is recommended to install the unit slightly forward of the center of the center of the roof and centered from side to side. I have attached diagrams from the installation instructions for your reference. view full answer...
If the 30 lb tank had the ACME style of fitting found on DOT propane tanks the Camco Propane Hose w/ Shut-Off Valve # CAM57629 would fit and work well. This type of fitting is also referred to as Type 1. view full answer...
I spoke to my contact at Reese and they informed that in certain cases, there can be additional space between the wing set on the trailer and the mounting plates for the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part # RP85FR when replacing a Lippert 1621HD pin box. Therefore, the Spacer Kit for 5th Wheel King Pins part # RP61301 that you referenced is needed.
The majority of cases do not require the spacer kit when replacing the Lippert 1621HD pin box but as mentioned,... view full answer...
I can't confirm the fit of the # C11405 hitch on your GT model with Active Exhaust and Magneride. I also can't put to you in contact with a customer just because they posted a review. A Customer named Pete also installed this on a 2018 GT and stated he had to move the active valve performance exhaust and clips to the back of the sensor to attach it back to the frame. He said it was a minor adjustment but again don't know if there was magneride but likely so on that model. He said the... view full answer...
The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31026 is only a confirmed fit for 1992 - 1996 Ford F-150 models. We have rear mounted hitch options but there isn't a front mounted hitch compatible from any of our manufacturers.
It if often due to the frame mounting locations, ground clearance, and even trim. If you need to carry something there are other options to consider. If you want a snow plow there are custom brackets. Let me know if I can help with a specific... view full answer...
Yes, the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-97-100 is a confirmed fit for your 2010 Ford F-350 and comes with all necessary hardware.
As for the back up camera, I recommend the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002. This camera is super simple to install but the wiring could be just a bit short if you have a long bed so you may also need to pick up an extension cable # HM3100504060 to complete your connections.
I've attached some videos... view full answer...
There is not currently an adapter to go between the Blue Ox Adventurer Tow Bar # BX7322 and the etrailer Classic Base Plate Kit # e98968 so you would need to use a different tow bar in order to flat tow your Fiesta. You would need to use the Roadmaster Tracker Tow Bar # RM-020 along with the adapter # e98983 if you were wanting to stick with a ball mount coupler style tow bar. view full answer...
The best supplemental braking system for your 2022 Ford Bronco is going to be the Demco SBS Stay-IN-Play item # SM99251. This system offers automatic, real-time braking in your Bronco that is proportional to your RV's braking force. The actuator box installs permanently so that you never have to remove, adjust, or reactivate. The system connects to your RV and engages your Bronco's brakes when the RV brake lights illuminate. The removal of the two fuses will not effect the function of this... view full answer...
Yes, we do have a hitch for a 2010 Ford Escape. It is the etrailer hitch item # e56AR. This hitch is custom fit and bolts to your Escape with included hardware.
The etrailer Hitch item # e56AR is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight that can be increased to 5,000 lbs and 500 lbs when used with a weight distribution hitch. This hitch is made in the USA and weighs 36 lbs.
This hitch fits hybrid models but will not... view full answer...
Yes, the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR is a confirmed fit your 1993 Minnie Winnie on a Ford E-350 chassis. view full answer...
The Air Lift item # AL95FJ does not fit the 2022 Dually F-350s it is designed only for single rear wheel models. The Air Lift item # AL58KV only fits the duallys.
Both kits are confirmed to fit the 2022 Ford F-350s. They each have a 5,000 lbs load leveling capacity. The stainless steel construction provides better protection from the elements.
I have linked a review video below.
I recommend adding the Air Lift WirelessAIR Compressor System item # AL74000EZ. This onboard compressor... view full answer...
The Air Lift LoadLifter 5000 Ultimate Plus Air Springs w/ Internal Bumpers # AL95FJ is going to install in the same location as your factory bump stock and will not interfere with your gooseneck hitch. If you go through our fitguide with your vehicle it will have tech notes on whether installation will interfere with an in-bed hitch.
If you are also wanting an on-board compressor then I recommend the Air Lift WirelessAIR Compressor System for Air Helper Springs # AL74000EZ. This dual... view full answer...
The 2 most cost-effective roof rack options for the TS Rails, like what come with the Elevate Rack System # TX24NV for your 2022 Ford Maverick, are the following kits:
65" HD Bars - # Y01-140B-NT
65" Vortex Aero Bars - # Y02-500B-NT
The HD bar kit uses bigger bars and I only recommend using them if you plan on carrying things like lumber and bigger cargo that doesn't require a specific rack. If the goal is to carry some kayaks, bikes, or something like a cargo box then you need the Vortex... view full answer...
The size of GateMate Pro that Thule recommends for your 2019 Ford Ranger is the part # TH823PRO which is 7 inches shorter than the # TH824PRO that tis 60 inches long and for full size trucks. We don't have a great way to fit the longer version as it would over hang quite a bit. view full answer...
Your 2019 Ford F-350 short bed with the OEM puck system can use the fixed B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package # BWRVK3300.
It'll both fit your puck system and work with your rubber pin box, but you likely won't be able to make very sharp turns, so if you're okay with that, you can use use fixed hitch. To find out for sure use this formula:
(A + B) - C = Clearance
A = Distance from center of middle puck hole to cab
B = Length of pin box arm
C = Width of... view full answer...
With your Ford F-53 chassis under your 2017 Windsport you will need to use a receiver like the Curt Weld-On # C99CR. The F-53 and F-550 frames are different and do not use the same mounting holes. There is not a custom fit receiver for the F-53 as the chassis can be modified by the RV manufacturer and would require different options for different RVs. Be sure to verify your exact tow rating as well as the F-53 is rated much lower than the F-550.
If you attempted to install the Curt # C15445... view full answer...
The RockyMounts replacement bar clips would need be compatible with Yakima round crossbars, however RockyMounts could not say if they'd be compatible with a Yakima bike rack as they haven't been tested with one. This being said, there's almost no physical difference between the Yakima # Y8810135 SnapArounds and the RockyMount # RKY1330 Replacement Bar Clips you've looked at. Because they're almost identical, and RockyMounts states they'll fit a Yakima crossbar, I'm very confident that... view full answer...