Thanks for the picture! You won't need an extender plus that will cut your capacity. To clear your Bronco's spare tire you're going to want the Curt Ball Mount for 2" Hitches item # D-28. This extended ball mount has a 6" drop and is 14-1/4" long. It has plenty of capacity for your boat trailer.
For a 2" hitch ball you will want the Curt item # A-90. view full answer...
For a Blue Ox compatible base plate kit that works with your 2023 Ford Bronco, you will need the Blue Ox Base Plate Kit item # BLU23XR. This kit is custom fit and comes with everything needed to install it on your Bronco. These attach in the same place where your recovery hooks are located. The base plate replaces the recovery points which are not rated to be used for flat towing. I have attached a picture below so you can see what they look like installed.
The tow bar needs to be within... view full answer...
The CIPA Universal Door Mount Mirror, # CM45000, can be used on any application that you choose. They were primarily designed to be used as towing mirrors on GM trucks and vans, but the universal design makes it a great option for almost any towing vehicle.
If you are planning on using this on a large RV such as a Class A motor home, I can tell you that this mirror is probably not as large as the original mirrors. They will also not mount in the same position. The OEM mirrors on most... view full answer...
The Curt Trailer Hitch Receiver # 14001 is designed to fit your 1978 Ford Bronco Custom XLT as long as you have a standard or step bumper. It will not fit if you have a roll pan style bumper.
The Curt Vehicle Wiring Harness # C58044 will allow you to splice into your factory tail light wiring so you will have a 4-way flat. This is the common connector used on small trailers and will also allow for Auxiliary Lights # C53201. view full answer...
Although we do have running boards available for your 1990 Ford Bronco, the # AA3025165 will not fit. Since there are no motorized options available I recommend the Aries Round Nerf Bars # AA203001. These have a 3" diameter and a carbon steel construction. They come with a custom mounting kit specifically designed for your vehicle. view full answer...
Since you already have item # SM99243 set up in your Tiffin motorhome you will just need the Demco SBS Second Vehicle Kit item # SM99209 for your 2023 Bronco. This kit includes all the parts needed to connect to your motorhome.
I have attached an installation video below so you can see how to get this product set up.
Some other parts you will need to flat tow your 2023 Bronco are listed below along with any installation videos we may have:
Charge Line Kit - Roadmaster Battery Charge... view full answer...
We absolutely have a Curt trailer hitch receiver that fits your 2021 Ford Bronco; the hitch that fits is the following part:
- Curt Trailer Hitch Receiver # C76WR
The # C76WR is a Class III hitch with a 2 inch receiver and 3,500 lb capacity so it'll meet all your needs for towing or accessories like a bike rack or cargo carrier.
As for the installation difficulty you asked about, it is honestly about the simplest possible install you can find for a hitch. I have added a cut out below... view full answer...
The Thule Spare Me # TH963PRO, that you mentioned is confirmed as a fit for the 1987 - 1996 Full Size Ford Broncos, but unfortunately is not confirmed for your year Bronco.
My contacts at Thule have informed me that this spare tire bike rack will fit vehicle tires ranging in size from P195/75R15 to P265/70R17 or P255/70R18. It will fit tires with widths up to 10 inces and diameters up to 32 inches. Additionally to install the Thule Spare Me you need about 4 inches from the outer edge of... view full answer...
Bestop products, including their Supertop Soft Top for Ford Bronco # B5153301, are intended for use on vehicles with standard OEM equipment. If your Bronco has a modified or aftermarket roll bar then I cannot predict the fit of this item. view full answer...
I recommend using the Saris Swing Away Hitch Extender # SAR36VR with the Thule Hitching Post Pro # TH934XTR on your 2022 Ford Bronco Sasquatch. The swing away extender allows for up to 250lbs to swing away from behind your Bronco. This will allow you to access the back tailgate on your Bronco without having to remove the bike rack. It will extend the bike rack out 13-1/2" so you will have more than 1' clearance from your spare tire to the bike rack upright. The 1/2" difference you measured... view full answer...
From the sounds of your question, I believe you are referring to either Rock Rails or Tube Steps equipped on your 2022 Ford Bronco. If this is what you meant, then yes! The WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set # WT25YD are confirmed to fit your vehicle with either of those accessories installed.
If this is not what you meant, feel free to respond to this answer to clarify. Also, you can feel free to attach a picture of what you have installed as well. view full answer...
The correct Westin Fey Surestep Rear Bumper for a 1984 Ford Bronco is part # 21002-95600. This is a complete kit that comes with both the bumper and custom mounting brackets. The custom mounting brackets make for a bolt-on, drill free install. It's a heavy duty bumper with chrome finish for protection and hitch ball hole for towing. view full answer...
Yes, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK55VR is specifically designed to be used on your 2021 Ford Bronco Wildtrack that did not come with a factory tow package. This kit will allow you to install the Redarc Tow-Pro Elite Brake Controller # RED63RR onto your Bronco and give you a clean factory look.
A Mounting Bracket # 18138 will allow you to mount the 7-way connector to a Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR with its mounting... view full answer...
I have a great hitch for your 2022 Ford Bronco, it is the Draw-Tite Trailer Hitch item # DT37GR. This hitch is custom fit and bolts to your Bronco with included hardware.
I really like this hitch because of the design and strength. It does not have a crossbar and attaches directly to your bumper beam. It has the highest towing capacity of available hitches for your Bronco at 4,500 lbs.
To add a wiring harness to your Bronco you will want the T-One Vehicle Wiring Harness with 4-Pole Flat... view full answer...
We have all of the necessary components you will need to flat tow your 2022 Ford Bronco. Since you have the heavy duty bumper we will start with the detachable base plate kit you requested. The Roadmaster Direct-Connect Base Plate Kit item # RM92ZR is custom fit for your Bronco's heavy duty bumper and has a easy to use setup. I have attached a picture below.
I have listed the other components needed to flat tow below along with any installation videos we may have.
Tow Bar - The most... view full answer...
We do have an option for one of those things, which is the bike rack, and it will fit right on the A-Frame of your R-Pod along with the trailer jack, hence it's name:
- Jack-It 2 Bike Rack for A-Frame Trailers # LC429756
The # LC429756 will mount using the same holes as the jack, and it simply goes over the jack, and has 22-1/2" of clearance from the base, which is plenty of room for your jack to extend.
We have had customers use this rack on their R-Pods, and it will hold a pair of... view full answer...
Yes, WeatherTech has confirmed that the WeatherTech Mud Flaps # WT29KD will fit with the factory Rock Rails on your 2022 Ford Bronco. view full answer...
The "524469-5" is the same as our Roadmaster Direct-Connect Base Plate Kit part # RM92ZR which fits a 2022 Ford Bronco with Ford Performance Heavy Duty Modular Bumper.
If you need replacement arms, we have these available as the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. view full answer...
To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like a standard fitting, while the BrakeSync will have it's own proprietary coupler (pictured below). If you have the BrakeSync you'll want part # DM23MV, if you have the Tiffin air brake setup you'll want part # DM55MV.
If you find you have no air coupler... view full answer...
If you install either the T-One Vehicle Wiring Harness for LED Tail Lights # TK99VR or Incandescent Tail Lights # TK33VR on your 2022 Ford Bronco, you will be able to use the Curt Trailer Connector Adapter # C57102 with a Charge Line Kit # RM-156-75 to maintain your trailer battery. We do also have the 7-Way RV Upgrade Kit # ETBC7L which includes the 7-way adapter, charge line but does not have the additional backup alarm like the one you found. This kit also includes a larger circuit breaker... view full answer...