Trailer Hitch Receiver For a 2017 Windsport RV on a Ford F-53 Chassis
Question:
Hello,looking at C15445 to use on a 2017 Windsport with a Ford F-53 frame. According to Ford,it is the equivalent to a F-550 with a 34 inch width from outside frame rails. Will this fit and if not,is it returnable ? Thanks
asked by: Bob H
Expert Reply:
With your Ford F-53 chassis under your 2017 Windsport you will need to use a receiver like the Curt Weld-On # C99CR. The F-53 and F-550 frames are different and do not use the same mounting holes. There is not a custom fit receiver for the F-53 as the chassis can be modified by the RV manufacturer and would require different options for different RVs. Be sure to verify your exact tow rating as well as the F-53 is rated much lower than the F-550.
If you attempted to install the Curt # C15445 knowing it is not confirmed to fit you F-53 chassis it would not be returnable.
Products Referenced in This Question
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide
- Heavy Duty Receiver Hitch
- Weld-On
- 18 - 44 Inch Wide
- 1600 lbs TW
- 16000 lbs GTW
- Class V
- 2 Inch Hitch
- 18 Inch Drop
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2550 lbs TW
- 17000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2550 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Video: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - Review 15903
- Video: Review of Curt Heavy Duty Receiver Hitch - Adjustable Weld-On Hitch - 15902
- Video: Review of CURT Heavy Duty Receiver Hitch - Weld-On Hitch - C99CR
- Shop: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide
- Shop: Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
- Shop: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide
- Q&A: Class V Trailer Hitch Receiver Option For 2023 Thor Challenger Motorhome on Ford F-53 Chassis
- Q&A: Determining Spacing of E-Tracks for Vehicle Transport
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Front Axle
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Shop: Brake Controller
- Video: Roadmaster Tow Bar Dual Hitch Receiver Adapter Review
- Search Results: 15511
- Search Results: 41947
- Video: Draw-Tite Ultra Frame Trailer Hitch Installation - 2019 Ram 3500
- Video: Curt Class IV Trailer Hitch Installation - 2014 Ram 3500
- Video: Review of Roadmaster Hitch Adapters - Anti Rattle 2" Hitch Extender For Tow Bars - RM-071-1075
- Shop: Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Q&A: Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
- Q&A: Dimensions from Bottom of Frame to Top of Receiver on Draw-Tite 41943 on 2000 Ford F-550
- Q&A: How Far Down is the Crosstube from the Truck Frame on Hitch 15445 on a 2002 Ford F-550
- Q&A: Curt Hitch # C15845 Mounting Bolt Hole Spacing
- Q&A: Distance Between Mounting Holes On the Curt Trailer Hitch Receiver C15445
- Search Results: c15810
- Search Results: c15845
- Search Results: c14048