Yes. You can use the RedArc Tow Pro Liberty # RED24FR with your Reese Multi-Plug Wiring Harness for Factory Tow Package - 7-Way and 4-Way Flat Trailer Connector # 74682; it really doesn't matter since it doesn't directly plug into the brake controller. With that said, since that is not the factory trailer connector, unless the # 74682 was replacing a factory trailer connector you will need to hardwire in the RedArc Tow Pro using # RED69FR; a wiring adapter like the # 3035-S cannot be used... view full answer...
I have a solution for you. Unfortunately, the Westin Sure-Grip Running Boards # 27-6620-1265 will not fit the 2002 or the 2003 Ford Expedition. However, the Westin Sure-Grip Running Boards that will fit both the 2002 and 2003 models is part # 27-6130-1815. The running boards come with all hardware needed for an easy bolt-on installation. view full answer...
I have an answer for you. Unfortunately, the Batwing and Foxwing Hardware Kit for Rhino-Rack Heavy-Duty Crossbars # RR33101 is customized to fit the Rhino-Rack Batwing Awnings as well as the Rhino-Rack Foxwing Awnings. The bolts specially fit the bracket that mounts those two awnings to a Rhino-Rack pioneer platform which is part # RR43259. If you have your own awning that you wish to attach to a Rhino-Rack Pioneer platform, you will need to modify the brackets in order to make it fit.... view full answer...
Yes you could install an e-track like the part # EM59150 between two boards. There's no requirement that an e-track has to install only on a single board. Having them across more than one board would probably spread the weight out better anyway. view full answer...
To use the Thule Hullavator item # TH898 on your 2014 Ford Expedition you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Expedition has the raised side rails, I recommend the Roof Rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
TimberLine Towers for Yakima Crossbars - Raised, Factory... view full answer...
The measurement needed to determine the topper size needed is to measure from the outside edge of the flange to the outside edge of the other flange on the slide out. You also need to allow for 7" of clearance on both sides to make sure your topper arms don't come into contact with anything else.
If your measurement is 127" then you'll want the Solera RV Slide-Out Awning - 10'7" Wide - 48" Projection - White Item # LCV000163294 or for black # LCV000168326.
The # LCV000163299 awning is... view full answer...
We have a platform rack for you but the Rhino Rack platform is not one that will work. I do have a Yakima platform # Y05045 that will work for your 2018 Ford Expedition. You just need this adapter # Y05042-2 and these towers # Y33TR. This will add about 4-3/4 inches from your roof to the top of the platform. It will add less height to your side rails so it is rather low profile.
This rack is the same as the rhino rack but just Yakima. I've included a video for you to watch so be sure to... view full answer...
Congrats on your new ride! The best towing mirrors for your 2022 Ford Expedition are going to be the K-Source Universal Towing Mirrors item # KS3891-2. These mirrors have a larger flat mirror that reflects clear detailed images. These clip-on mirrors offer an extended view of both the driver's and passenger's sides while you're towing. view full answer...
If you take a look at the accompanying photo, you can see where the 12-volt pin will be on the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774.
If you do not know the functions of your yellow or black wire, you'll need to use a circuit tester such as # PTW2993 to determine the functions of the wires. view full answer...
The Edge Products Evolution CTS3 Programmer/Monitor, part # EP49YR is not compatible with your 1998 Ford Expedition. I have confirmed this through my Edge Products representative.
Instead, I can recommend the Superchips Dashpaq Performance Tuner - 2.4" Color Screen - Gas - Ford
Item # SU1060. This product is NOT CARB compliant, and therefore should not be installed on vehicles registered in California.
I have linked you to an FAQ article about performance programmers that you might... view full answer...
For a set of extension mirrors that may work for your 2009 Ford Expedition, I recommend using the K-Source Universal Towing Mirror part # KS3891. As long as your factory side mirrors are between 4-1/2" to 11-1/2" tall and have an outer lip around the edge of the mirror, they will work well for you. You will need one mirror for each side of the vehicle.
We do not have a set of towing mirrors that are confirmed to fit your vehicle at this time. view full answer...
To determine the correct replacement equalizers, bushing, wet bolts, shackles straps, etc. you'll need to do a bit of measuring first. The manufacturer designed the suspension to sit in a specific way so that it can roll back and forth so it's important to match the factory sizes.
Starting with the equalizer you'll want to measure from the center to center of the shackle strap holes (horizontal) and from center of the shackle strap hole to the hanger bolt hole (vertical). You'll want... view full answer...
Since your 2015 Ford Expedition has the factory wiring you can use the Redarc Tow-Pro Liberty Brake Controller # RED24FR and the Redarc Plug-and-Play Wiring Harness # 331-TPH-007 to plug into the port at the dash. This brake controller will work for your dual axle trailer and will provide a more sleek look that doesn't require a big bulky controller in the cab of your Expedition.
To provide for a more factory appearance you can use the Universal Mounting Panel for Redarc Tow-Pro Trailer... view full answer...
The Clamp-On Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket Part # SP1101 are designed as a universal fit. If your 2019 Ford Expedition has the factory raised side rails, these will mount to them and will be secured down with the provided tool.
I have added below review and installation videos that show how the adapters will mount to any application. view full answer...
The HitchMate TruckStep Extendable, Hitch Mounted Step, # HE4045 fits most vehicles but you will want to take some measurements to be certain it fits your 2020 Ford Expedition Max Platinum. First measure from the center of the hitch pin hole to the where the end of our telescoping rail will set. This will be about 19-1/2", see the attached image and note the linked product video. Where the hitchstep mounts to the receiver, there is a 1-5/8" gap.
Please note other options such as the... view full answer...
Weight distribution systems can be used with air bag suspension systems as long as the air bags are not automatically adjustable.
The purpose of your air bag suspension is to help reduce sag at the rear of your vehicle when hauling a heavy load. The purpose of a weight distribution system is to distribute the load on the rear axle of your Expedition to all of the axles which will also reduce sag.
If you are still experiencing sag when your air bags are inflated, then a weight distribution... view full answer...
The K-Source Universal Towing Mirror # KS3891 are a universal fit, clip on mirror that will fit mirrors ranging from 4-1/2 inches to 11-1/2 inches tall.
We have had several customers purchase these mirrors for their Expeditions and been happy with them. view full answer...
Thanks so much for that good info, and one of the nice things about the Blue Ox SwayPro weight distribution hitches is that when you upgrade your trailer to something heavier (or lighter) you can simply swap out the spring bars to ones with the right rating, and you're set. So you don't have to purchase anything else for the system, you can just add the spring bars.
Since loaded tongue weight rating is going to be in the range of 12 percent, you will want to go with the SwayPro bars rated... view full answer...
Mounting two Hullavators # TH898 requires 57 inches of crossbar length (inside of the mounting points) and a minimum of four inches on both ends outside of the feet to operate. With that being said, you will need crossbars with a minimum length of 65 inches. The Yakima JetStream crossbars 70-inches # Y00427 will do the trick. The towers you need are the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR.
However, I called my contact with Thule and he strongly... view full answer...
I have a similar roof rack that will work for you, but the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 76" Long x 53" Wide RR42103BF is not a confirmed fit for your 2017 Ford Expedition. This requires a special installation kit, which Rhino-Rack does not make for your vehicle and there is not a way to safely attach it to your OEM crossbars unfortunately.
The best route is to use Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF... view full answer...
Go To Results