That's quite the journey you took us on there and I have to say, I've never heard of an issue with the trailer side plug not fitting the Curt Echo Wireless Trailer Brake Controller # C51180.
So I called Curt to see if this is an issue at all with the Echo, and was told it was not, and that there were just a couple of reasons why the Echo would not fit. One was if your trailer did not have a standard 7-way plug, though that seems unlikely, as I did just take a look at the Geo Pro and from... view full answer...
The etrailer SD Non-Binding Tow Bar - RV Mount, # e34ZR is confirmed to fit Demco base plates. However, we offer kits that will attach to Valley or Reese base plates, Blue Ox or Curt base plates, Roadmaster base plates, there are two different kits for the crossbar style or the direct connect style, as well as Duncan base plates. You'll want to make sure you get the appropriate kit with the ends that will attach to the base plate you're installing on your vehicle.
Please note the attached... view full answer...
The T-One Vehicle Wiring Harness with 7-Way Trailer Connector part # 22124 is a great option for a 2020 Ford Ranger. It provides a 7-way trailer connector. If you're looking to have both a 4 and 7-way connector then I'd recommend adding the 7- and 4-Pole Trailer Connector Socket part # HM40975.
The T-One Vehicle Wiring Harness with 7-Way Trailer Connector will work with any connector that has the same plug style. view full answer...
I have a great catalytic converter option for you. Based on my research, I confirmed with Magnaflow that the only way to figure out if the MagnaFlow Stainless Steel Catalytic Converter - Universal - California Approved MF33007 will fit your 1997 Ford Ranger 3.0L V6 engine is by providing your EFN (Engine Family Number). If you know that number, feel free to respond to this answer with that information. The tag with that number is commonly found near the radiator shroud under the hood.
However,... view full answer...
To tow your 1999 Ford Ranger you could use the Roadmaster StowMaster Tow Bar - Car Mount - 2-5/16" Ball - 6,000lbs # RM-504. You would need some Roadmaster base plates like the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 483-1 for it to connect to. To flat tow you would also need a braking system, tow bar wiring kit, and safety cables.
For the tow bar wiring kit I recommend just using some magnetic lights like the Roadmaster Standard Magnetic Tow Lights # RM-2120 to simply... view full answer...
According to my research on your Trail/Box 200 camper, I discovered that the total length of your camper is about 18.2 feet long. From this length, the Adco SFS AquaShed Truck Camper Cover - 17-3/4' Long - Gray # 290-12264 will unfortunately be too short (since it is only 17-3/4 inches long).
However, a great option that will fit your camper is the Camco UltraGuard Slide-In Camper Cover - 18' Long # CAM45770. This cover will give you the appropriate height and length you need to cover... view full answer...
Yes it will fit your 4WD 2011 Ford Ranger made in Canada. The plow fits a 2" hitch, so the fit note saying "does not fit 2WD vehicles built in Canada" is related to the Curt Front Mount Trailer Hitch Receiver # C31063.
Per Curt, that hitch does not fit 2WD Rangers made in Canada but does fit 4WD and is what you will need with the Detail K2 Snowplow for 2" Hitches # K2AVAL8219. view full answer...
Yes, since the Rhino-Rack Fishing Rod Carrier - Locking - 5 Fishing Rods # RR573F can work with round, square, aero, elliptical, and most factory crossbars, it'll work just fine with the Thule AeroBlade Edge Crossbar like # TH7601B. view full answer...
The length of the Softride Tailgate Pad Bicycle Transporter, # SR26461, is 54 inches. If the tailgate on your 1994 Ford Ranger is at least 54 inches across then this pad will fit with no issues. If it is a little shorter, that is ok too. The pad will just be scrunched up some on the ends which is permissible. I have included a link to a video review of this pad for you.
We also have the Thule version, # TH823PRO, that is also 53 inches wide. We know that it will fit a 2001 Ford Ranger... view full answer...
For your 2021 Ford Ranger I recommend the Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item # RM-520 for your tow bar and the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM-524459-5 for your baseplates.
For flat towing you'll also need a brake controller, tow bar wiring, and safety cables. I recommend the following:
Tow Bar Wiring: Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154
Brake Controller: Brake Buddy Stealth Supplemental... view full answer...
The Westin Custom Fit Truck Bed Mat item # W23XV you were looking at weighs exactly 29 lbs. This mat is 3/8" think and is confirmed to fit the 5' bed models of the 2019 Ford Ranger. view full answer...
I believe what you are asking is in regards to tow bar wiring for your 2020 Ford Ranger. And for that what you will need is the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7.
This includes the wiring for the tail lights and turn signals which you'll connect to the included socket; the kit also includes the 6-way to 7-way to plug right into your RV's 7-way.
In regards to wiring for the battery, I checked with Roadmaster, and your 2020 Ranger does not drain... view full answer...
I have a two different combinations you can go with in order to use both a tonneau cover and ladder rack on your 2001 Ford Ranger flareside.
Option 1: The Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails # 311-JEF0908 and the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 long with the Tonneau Cover Adapter Kit # Y01155.
Option 2: The Access TonnoSport Soft, Roll-Up Tonneau Cover # A22010139 and the Thule TracRac SR Sliding Truck Bed Ladder Rack... view full answer...
Yes, we do have the Rhino-Rack Pioneer Platform Rack # RR83ZW for your 2023 Ford Ranger Crew Cab. This will mount to your roof using their Backbone system providing a clean appearance. view full answer...
If you are asking if the Yakima Kayak Carrier with Tie-Downs # Y04083-04082 will work with the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XTB then the answer is yes. The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XTB has load bars (crossbars) that measure 3-1/2" wide x 1-1/2" tall. I contacted Yakima and they were able to confirm that the Yakima Kayak Carrier with Tie-Downs # Y04083-04082 will fit bars with those dimensions.
The Yakima Same... view full answer...
Yes, the Air Lift Ride Control Air Helper Springs # AL59516 will fit your 2002 Ford Ranger XLT super cab 4x4 with the 4.0L V6 and 5 speed automatic transmission.
I recommend using the Air Lift WirelessAIR Compressor System # AL58WQ with these air springs. This system utilizes a smart manifold which allows you to control the air pressure from your smart phone using the Air Lift app. This means you do not have to run air lines in your cab or carry a separate remote. The smart manifold will... view full answer...
I have a possible solution for you.
First, though, the Putco Venture Tec Overland Truck Bed Rack, part # P94FR, is only designed for the 5-foot bed of the 2021 Ford Ranger.
Instead, for your 6-foot bed, I recommend the Thule Xsporter Pro Mid Overland Truck Bed Rack, part # TH34RR. It sits at 16" above your bed rails and has a weight capacity of 600 pounds (100 more than the Putco option).
If you were interested in the side bars that the Putco comes with, the Xsporter Pro has some available.... view full answer...
The Reconn-Deck Ladder Rack Crossbars use standard T-Track dimensions so if a roof cargo basket has T-Track mounting hardware you can definitely mount them to the Reconn bars.
The Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB02 you're looking at only comes with mounting hardware for clamping around crossbars but it does like you'd be able to swap out some of the hardware for something that mounts into the T-Tracks. We currently don't have a kit built for this so it's something you'd... view full answer...
The Rear View Safety Wireless Hitch Camera # RVS-83112 is the only camera that we offer that would have the monitor mount from the 12v outlet, but it's powered by 9v batteries instead of being hardwired. If having the camera be hardwired is an absolute requirement then you'll either have to get a system that replaces the rear view mirror or have a suction cup mounted monitor instead of one that connects to 12v outlet.
The Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision... view full answer...
The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms, # 477-1, is a confirmed fit for the 2010 Ford Ranger 4 Wheel Drive Sport showing no exceptions listed.
If you need a two bar, I suggest the Roadmaster Falcon All Terrain, Non-Binding Tow Bar, Motorhome Mount, # RM-522. Unless you want a coupler type mount, then the Roadmaster Stowmaster Tow Bar part # RM-501.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you... view full answer...
Go To Results