Expert Answers about Ford F-53

• Replacement Shroud For Older Coleman Mach 7000 Series AC
• We do have a fit for your older 7000 Series Coleman Mach air conditioner, though the one you mentioned is not quite tall enough for your AC. So instead, what you will need is the following: - MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand # MA8335A5261 This cover measures 37" long x 26" wide x 13-1/2" tall, so it has the length, width, and height needed for your AC.
  view full answer...


• Recommended Suspension Enhancement Products for 2016 Jayco Alante 26X Based on Ford F-53
• Aftermarket upgrade suspension kits will provide a clear improvement over the stock components in your 27-foot 2015 F-53-based Jayco Alante RV. For the V10-equipped F-53 the correct steering stabilizer from Roadmaster is indeed part # RM-RBK22-RSSA and the correct rear-axle anti-sway bar is part # RM-1139-148. Both of these are suited to your RV's 23,000-lb GVWR and installation videos for both products are linked for you. I have had the opportunity to ride in a similar RV both before...
  view full answer...


• Correct Anti-Sway Bars and SumoSprings for a 2012 Thor Ace Evo 29.2
• I have listed the correct suspension enhancements for a 2012 Thor Ace Evo 29.2 on a Ford F-53 Chassis below: Roadmaster Front Anti-Sway Bar - part # RM-1139-148 Roadmaster Rear Anti-Sway Bar - part # RM-1139-146 Roadmaster Reflex Steering Stabilizer with Mounting Brackets - part # RM-RBK22-RSSA Roadmaster Front TruTrac Front-Axle Trac Rod - part # RM-TRAC-F550 (Not Compatible with SumoSprings) SumoSprings Front Rebel Custom Helper Springs - part # SSF-170-40-2 SumoSprings Rear Maxim Custom...
  view full answer...


• Recommended Jack Pads for Leveling Systems w/ 10 Inch Round Concave Jack Feet
• I have a solution for you but the Stromberg Carlson RV Jack Pads item # SC29MR do not work with concave feet. Instead you will want the SnapPad Prime Jack Pads for Power Gear Leveling Systems w/ 10" Round Concave Jack Feet item # SP84FR4. These are specifically designed for 10" round concave jack feet.
  view full answer...


• Steering Stabilizer for 2020 Jayco Alante 29S on Ford F-53 Chassis
• We do have the right steering stabilizer for your 2020 Jayco Alante 29S with an 18,000 lb GVWR on a Ford F-53 chassis, with the correct part being the following: - Roadmaster Exact Center Steering Stabilizer # RM33RR The stabilizer will do a very nice job of helping keep your rig in line as you journey. I do want to add, to get the absolute best control over the handling of your Alante I recommend considering adding a rear anti-sway bar; the correct bar for your '20 Alante 29S is the...
  view full answer...


• Correct SumoSprings for a Newmar Canyon Star 3810
• The correct SumoSprings Custom Helper Springs for a Newmar Canyon Star 3810 is part # SSF-173-40-2 for the front and part # SSR-187-54-1 for the rear.
  view full answer...


• Which SumoSpring Helper Spring for 2018 Holiday Rambler Reno Motorhome on Ford F-53 Chassis
• For your Holiday Rambler with a 16K, the Sumo Springs # SSF-170-40-2 would be the correct Rebel Helper Springs for the front axle. For the rear, you'd want to use # SSR-184-40-1. The # SSR-183-54-1 you'd looked at are for a vehicle with a higher GVWR. The SumoSprings will improve your ride quality by reducing bumps, sway and body roll. I've linked to product installation videos you might find helpful.
  view full answer...


• SumoSprings Fit on 2006 Georgie Boy Pursuit 3480DS on Ford F-53 Chassis
• Based on my research, your 2006 Georgie Boy Pursuit 3480DS was built on a Ford F-53 chassis and has a GVWR of 20,500 lbs, though I do recommend verifying this just to be sure. If so, I checked with SuperSprings, the manufacturer of SumoSprings, and there is one kit that will fit your motorhome, for the front axle only: - SumoSprings Rebel Custom Helper Springs # SSF-171-40-2 If you wanted to add suspension enhancement to the rear axle of your motorhome, you could do so but would need...
  view full answer...


• Are There Air Bags for the Front of a 2018 Ford F-53 with 24K GVWR
• I do have an option for you but there are no air bags that fit the front of a 2018 Ford F-53 with 24K GVWR. I don't have specifics on what the issue is exactly but odds are there is interference issues they simply cannot work around. I cannot advise on modifications either. I am sure if there was a workaround the air bag manufacturer would have taken the time to design a kit that works, they want it to fit just as much as you do after all. Instead, I recommend the SumoSprings Rebel Custom...
  view full answer...


• Roadmaster Steering Stabilizer Fit For 2022 Forest River FR3 w/ 18,000 lb GVWR on Ford F-52 Chassis
• I checked with Roadmaster for you, and the correct steering stabilizer for your 2022 Forest River FR3 with an 18,000 lb GVWR on the Ford F-53 chassis is the following: - Roadmaster Reflex Steering Stabilizer with Mounting Brackets # RM62VR This is a good addition to help stabilize your motorhome, though I do recommend also considering a rear anti-sway bar as these are the best way to enhance the ride of your rig. Rear anti-sway bars are better constructed with higher-strength, thicker...
  view full answer...


• Recommended Trailer Hitch Receiver For A 2017 Thor ACE Motorhome On A Ford F53 Chassis
• For your 2017 Thor ACE on an F53 chassis I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07. We don't have a class 4 hitch compatible currently but this one is class 5 and will fit frame widths up to 44". It has a 16,000lbs GTW and 1,600lbs TW. Note: this does not mean you can tow up to 16,000lbs just because the hitch can handle it. You'll need to review your owner's manual to verify the towing capacity of your vehicle. This receiver...
  view full answer...


• Steering Stabilizer and Anti-Sway Bars For 2019 Winnebago 30R Intent on Ford F-53 Chassis
• We have the exact parts you need for your 2019 Winnebago 30R Intent, which was built on a Ford F-53 chassis. The steering stabilizer, rear anti-sway bar and front anti-sway bar that fit are: - Rear Anti-Sway Bar: Roadmaster Rear Anti-Sway Bar # RM-1139-146 - Front Anti-Sway Bar: Roadmaster Front Anti-Sway Bar # RM-1139-148 - Steering Stabilizer: Roadmaster Exact Center Steering Stabilizer # RM33RR When it comes to the effectiveness of improving your Winnebago's handling, the best way...
  view full answer...


• Can I Use The Kuat Pivot On My Jeep Wrangler That Is Being Flat Towed Behind A Motorhome?
• I've reached out to the manufacturer and asked about your specific situation for you. I've found that even with the Wrangler being flat-towed it should ride just fine as long as the weight rating for the hitch can take the weight. As long as you have a 2" hitch and do not exceed the weight rating of your hitch, the Kuat Pivot # PVD20B or the Hollywood Racks RV Rider # HLY64FR you are good to go! Which, even with the carrier being 58lbs and you hauling a 50lb and 65lb bike you are still...
  view full answer...


• Front & Rear SumoSprings Fit on 2018 Nexus Maybach 32M on Ford F-53 Chassis
• We do have a set of both front and rear SumoSprings that will fit your RV. The 2018 Nexus Maybach 32M has a 22,000 lb GVWR and is built on a Ford F-53 chassis, so the exact SumoSprings that you will need are the following: - Front: SumoSprings Rebel Custom Helper Springs # SSF-170-40-2 - Rear: SumoSprings Maxim Custom Helper Springs # SSR-187-54-1 Adding both sets of helper springs is going to be really helpful for your motorhome to counteract sway and give you a more stable and comfortable...
  view full answer...


• Steering Stabilizer For 2021 Coachmen Pursuit on Ford F-53 Chassis
• We do have the correct steering stabilizer for your 2021 Coachmen Pursuit which was built on a Ford F-53 chassis. The correct part number for all models of '21 Coachmen Pursuit is the following: - Roadmaster Exact Center Steering Stabilizer # RM63RR The # RM63RR stabilizer will dramatically increase the handling and ride of your motorhome, making for a far more comfortable journey and allowing you to enjoy your time on the road instead of exhaustively attempting to keep your rig centered...
  view full answer...


• Anti-Sway Bar Fits for a 2008 Motorhome with Ford F-53 Chassis
• Thank you for the information! We have both front and rear anti-sway bars that fit a 2008 Ford F-53 chassis with the V10 engine size. The correct bar will vary depending on the GVWR of your motorhome: Front Anti-Sway Bar: Fits All Models - # RM-1139-148 Rear Anti-Sway Bar: 15.7K - 18K - # RM-1139-146 20.5K - # RM-1139-145 (only fits if shock mounts ate parallel to ground) 22K - 26K - # RM-1139-149 (may need extended longer U-Bolts - see installation notes section) Attached are some...
  view full answer...


• Recommended Tire Covers for 255/80R-22.5 Tires on 2016 Suncruiser 38Q
• Your 255/80R-22.5 tires measure 38.6 inches in diameter and are 10" wide. The SnapRing TireSavers Tire Covers # ST7004WH is designed to fit tires between 36" and 39" in diameter, and going to the next size up may not make them tight enough around your tires. The Tire Covers # ST7004WH will fit around your tires but the protruding hub caps will probably make it so the bottom of the cover does not go all the way to the ground. A better option may be the Adco Ultra Tyre Gard RV Wheel Covers...
  view full answer...


• SumoSpring Recommendation for a 2008 Fleetwood Bounder 35H on a 22K Ford F-53 Chassis
• The front and rear SumoSprings that I recommend for your 2008 Fleetwood Bounder 35H are parts # SSF-171-40-2 and # SSR-187-54-1 respectively. These not only help to prevent sway but they also help to keep the ride smooth.
  view full answer...


• Recommended Replacement For A 16 Carefree Freedom RV Awning On A 2016 Fleetwood Bounder Motorhome
• Since you have a 16' awning already I recommend the Solera 12V XL Power RV Awning # LCV000334965-362241. The arms are 72" in length so you'll want to ensure that there isn't something in the way that would interfere with mounting them to the wall of your motorhome. Overall, the installation is very easy but you'll want to have a few extra hands to help maneuver the roller around or hold the arm brackets in place while you mount them. I also recommend using some butyl tape # AL28FJ to...
  view full answer...


• Upgrading A 2021 Forest River GT5 To Lithium Batteries
• From what you're saying you're trying to have 6 batteries total (2 original lead acid batteries + 4 - 12v 100ah batteries as a separate battery bank). Unfortunately you won't be able to charge the lead acid batteries with the Progressive Dynamics Inteli-Power RV Converter and Battery Charger - Lithium - 12V - 60 Amps Item # PD9160ALV since it's designed for lithium batteries. Doing so could overcharge them and cause them to crack. You'll also want to ensure you have the proper wire gauge...
  view full answer...