Summer Starts Here - Save up to 70%
This 15" x 5" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 3.19" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Features:
Specs:
Durable Acrylic Enamel Finish
This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.
The automotive-rated center disc is raised and the stud holes are beveled and uncoated for better clamp force retention. This technology helps the wheel stay tight against your hub without the need for constant retightening.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Vesper 15 inch by five inch white modular steel trailer wheel with the five on four and a half inch bolt pattern. Now, this is a heavy duty steel wheel. This one is the modular design, has a nice bright, white finish on it. And the modular design is the design, if you notice it has the round holes that go all the way around the wheel. The finish is a white acrylic enamel finish, which will resist chipping and other damage better than the standard powder coat finishes.
This finish is applied after a zinc phosphate pre-treatment, and then it covers an e-coat primer layer. This will give you excellent corrosion resistance with a salt spray rating in more than 1,000 hours. It's the wheel that's used the beveled stud holes which help to keep the wheel securely in place on your trailer hub, eliminates the need for constant re-tightening of the lug nuts. If you notice also, the valve stem is included, it's pre-installed into the wheel. Now, this wheel does not come with the center cap.
If you do want a center cap, we do sell those separately on our website. You do wanna make sure to get a center cap that has a diameter of 3.19 inches, which is the diameter of the pilot hole right here. Your center cap would go through this hole. Now, this wheel does meet the SAE J1204 standards. Few specs on this wheel, we're gonna measure the diameter and the width.
The diameter, when you measure a wheel, will always be inside to inside. You don't wanna measure edge to edge. You're gonna measure where the tire will end up seating on the wheel. So, that's inside to inside. So, if we take our tape measure, we go inside to inside, there's your 15 inch diameter.
And the width is gonna be the same way, it's bead seat to bead seat. So, inside to inside, and there's your five inch wide. Now, this wheel bolt pattern is five on four and a half inches. If you want to measure that on a wheel that's an odd number of lugs, like in this case five, what you want to do, is you can pick any lug hole, let's say this one, and you're gonna measure across from this hole to either one of these holes. But when you measure it, it's from the center of the starting hole to the furthest edge of the hole that you measure to. So, if you put a ruler on it center of the starting hole to the furthest edge on this will measure four and a half inches. So, it's a five on four and a half inch bolt pattern. This wheel does use a wheel lug size of a half inch by 20. And the weight capacity on this wheel is 2,160 pounds. But that should do it for the review on the Vesper 15 inch by five inch white modular steel trailer wheel with the five on four and a half inch bolt pair..
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
This 15" x 5" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 3.19" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.