Customers prefer these similar products
This 12" x 4" steel trailer wheel has a 5 on 4-1/2 bolt pattern. 3-Step powder coat finish provides rust resistance and improved torque retention keeps wheel secure when mounted on your axle. Valve stem is included.
Features:
Specs:
Corrosion-Resistant Finish
The steel wheel goes through a 3-step finishing process that makes it both attractive and corrosion resistant. The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
The automotive-rated center disc is raised and the stud holes are beveled and uncoated for better clamp force retention. This technology helps the wheel stay tight against your hub without the need for constant retightening.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com, And today we're gonna take a look at this Task Master 12 inch by four inch white steel eight spoke trailer wheel with five on four and a half inch bolt pattern. This steel wheel with eight spoke design is sturdy and corrosion resistant. This wheel features a three step finishing process that includes a zinc phosphate bath to ensure good paint adhesion, e-coated primer, and a white powder coat on the outside. Now on the inside, which we just took a glance at, it is lightly e-coated to reduce friction and provide rust resistance with less flaking. Now this has improved torque retention technology, also known as ITR.
That helps keep the wheels securely in place on your trailer. Uncoated stud holes are beveled to offer better clamp force retention. As you can see here, the valve stem is included, and this wheel meets SAEJ1204 standards. And the rim dimensions from bead seat to bead seat is 12 inches in diameter. And the width of this rim from bead seat to bead seat is four inches wide.
And again, this bolt pattern is five on four and a half inches. The first number is, the first number in the bolt pattern is the number of bolt holes, and then that second number denotes the diameter in inches of the circle on which the bolt holes sit. So to determine the bolt circle diameter on wheels with an odd number of bolt holes, you just measure from the center of any bolt hole to the point in between, halfway between the two bolt holes directly across from the first. So measuring from here to the center of this bolt hole to directly in in between these two bolt holes, across from that first one. We are going to get that measurement of four and a half inches.
The wheel stud size is a half an inch by 20. And this has the capacity of 1,250 pounds. And the center cap is sold separately. If you pick one up, just make sure it fits the pilot diameter of 2.95 inches. And the, this has a zero offset.
Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.8 out of 5 stars (558 Customer Reviews)
This 12" x 4" steel trailer wheel has a 5 on 4-1/2 bolt pattern. 3-Step powder coat finish provides rust resistance and improved torque retention keeps wheel secure when mounted on your axle. Valve stem is included.Order was delivered on time as promised. Wheels looked good when taken out of the box. Bolted right up no problem.
Great product, but one of the three wheels has an edge dent and scraped edge finish which implies that it was subjected to rough handling prior to or during shipment. Noticed damage after opening box and removing first wheel. It appears the edge dent was oriented toward bottom of box with no added padding. Chipouts and scrapes can be repaired with touch up enamel. May need to return shipment to eTrailer. Note that I've experienced rough handling of UPS shipments on many occasions.
Nice wheel. Will get a tire put on tomorrow. It came with a valve stem to boot.
The wheel saved the day when people borrow a trailer they never seem to come back with the same stuff it left with
Rims look great and solid. Shipped fast and packing was great. Fit perfectly on my trailer. I would definitely recommend this company for your rims. Thank-you very much!!
I spent considerable time looking for a rim that would match my ST225/75R15 Load Range E tires with a load rating of 2,830 lbs in a 15" X 6", 5 lug by 4.5". I found these rims on the etrailer site and ordered them even though some reviewers said the finish on the wheels was not good. I received them within 3 working days of my order. The rims are beautiful. The finish on the outside of the wheel rivals any modern car paint. I went through the trouble of putting each wheel, without a tire, on my static balancer and I was overjoyed to find all three of them to be in perfect balance. The wheels are obviously made of thicker steel and carry a DOT load rating of 2,830 lbs. as advertised. Perfect! My only suggestion is that the valve stems that came with the wheels have no documentation documenting their psi capacity. So, I had no choice but to also order a set of 80 psi valve stems for my 80 psi tires and cut off and throw away the stems that came with the wheels.
I bought this wheel to use as a spare for my car trailer. I mounted one of my old tires to it and had it balanced, there were no issues. The paint on the out side of the wheel looks nice and even with good coverage. The paint on the part inside the wheel had some thin spots which I guess is okay it's inside the tire now. The over all quality of the wheel seems very good. This will work perfectly for my needs.
I am very happy with the wheels and the service I received at etrailer. And the process was very easy and Cathy T. was great to work with, and when I asked questions about my situation, etrailer answered them quickly and helped me in making my decision. My trailer was built in 1984 and is, and has been, my hay trailer. I have only had these for about a month, but so far so good!
Thank you to everyone at etrailer!
Just what we needed,fast shipping
etrailer came through, this was the only place I could find a 5x4.75" rim. Would have liked to have gotten a 14" but not a problem I can make up the difference on the tire dimension.
Painted steel wheels, fit my trailer perfectly. Unbelievable fast delivery. Exactly correct items. Great customer care. One of the best online stores anywhere. I highly recommend. Why would anyone not have a spare tire? Easy to attach spare tire carrier.
Everything has been performing as expected and the wheel still looks new!
Our wheels came on a timely manner and were just as advertised. They look great and the valve stems were correct for what we needed. Haven't pulled the trailer down the road yet, will know more then. Great company to work with will definitely pass it on.
awesome deal.
i got them for my 1950 gmc 150 deluxe pickup to replace the split rims & the 16.5s. im very happy with this purchase.
they will look great with some new gmc clips & caps & biased big whitewalls under my pickup.
they are painted. not powder coated but cant beat the price & free shipping.... thanks... ????????
These wheels were just what I needed. Great quality for an affordable price. I have an old hay wagon that needed wheels, after going to our local trailer and tractor store they told me they couldn't get them. Shipped right away and arrived in great time even with the New Year Holiday. I will definitely be using you guys for my future trailer needs.
Fast delivery and a perfect fit. Look good too. Personal service. Was recommended by my dad, now I recommend to you. Thanks.
Great quality and ready to use out of the box. Very happy with purchase and highly recommend after a years use. When they need replacing I will be buying again.
This is the first time I bought anything from etrailer. I got to say I'm very please with the product and the timely delivery. I had my rims early than what I expected. Instead of 5-7 day delivery I had them in two days. Very please! Plus it makes my trailer look a lot better. Thank you etrailer.
I must have an odd bolt pattern because etrailer was the only place I could find this pattern. Thank you etrailer for stocking these and they work perfectly.
Not Happy!!!! I spoke with a male rep and shame on me did not get his name. He advised me how to measure the holes to determine the correct size. I did as advised and ended up with the wrong rims. I spoke with Nicole H today who was extremely helpful. She emailed the diagram to measure correctly and helped to order the correct size. She also advised me the person I spoke with did not put notes in the system so we may have to pay return shipping. Nicole stated she would put in a request however I may still have to pay the shipping fee.
Nicole H was very helpful, knowledgeable and friendly. The person we spoke with originally should pay our shipping fee. The star rating is for the male I spoke with and not Nicole H.
Paint was all chipped on both inner and outer lips and pin stripes smudged. Needed them asap for a 400 mile trip. I mean they’re wheels but how hard is it to paint a wheel.
nice affordable rim, but shipping and packaging is terrible, paint chips and small dents in bead every time i order rims from etrailer.
Works as expected
I got exactly what I ordered. Took a while to get due to supply chain issues. Was outside or etrailers control. Very happy customer here.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.