Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Instantly improve your ride with this suspension upgrade kit. Heavy-duty shocks help to manage axle spring movement and provide a smoother, more comfortable ride. Hardware included for easy, bolt-on installation. Fits 3" overslung axles.
Features:
Specs:
Note: Fits overslung axles only - when the axle is below the leaf springs
Average Customer Rating: 4.3 out of 5 stars (41 Customer Reviews)
Instantly improve your ride with this suspension upgrade kit. Heavy-duty shocks help to manage axle spring movement and provide a smoother, more comfortable ride. Hardware included for easy, bolt-on installation. Fits 3" overslung axles.
I replaced the shackles, leaf springs and shocks on my fifth wheel. Man what a difference!
Well built product installation went well. Good
I strong magnets very useful for marking of upper shock tower. And a angle indicator very helpful in alignment with spring base plate. Front axle spring angle is 35 deg. Rear axle spring angle is 30 deg. This was mounted on a 5th wheel toyhauler
I bought this kit because my trailer would really bounce the truck around when going over bumps and on concrete bridges and so forth. My hope was that the shocks would really control some of the bouncing and make for a better ride. The kit is very straightforward and relatively easy to install. You start by putting the mounting bases on the axle, which requires removing the original bases and u-bolts. The kit comes with all new bolts and nuts. No need to lift the trailer at this point.
Next, I leveled the trailer so that the equalizers were level indicating that the axles had equal weight on them. I then used a floor jack to lift one axle, take the wheel off, and then lower it to get the equalizer level again. I then trial mounted the shocks to the upper mounts. Ideally, you want the shock perpendicular to the mounting base, which puts the shock at about 30* to the frame. To get it oriented as close to that angle as possible, I trimmed off the top corner of the mounting brackets. The instructions tell you to just measure a certain distance from the mounting bases and then drill the holes for the bracket. I tried that on one of the shocks but I found it easiest to mount the shock to the upper bracket then mount the shock to the lower base plate, compress the shock halfway, and mark where the upper bracket would need to be bolted. I used a prick punch to mark the hole centers and then drilled as instructed. The drilling went much faster than I expected and the self tapping bolts actually work really well.
After getting all four mounted, I went for a test ride and I can tell a very big difference in how the truck and trailer handle. A lot of the jarring and bouncing that I was experiencing is now gone. It’s not perfect but it is much better and this solution is a lot cheaper than a rubber pin box. Also, my Jayco fifth wheel trailer came with a Reese sidewinder pin box, which unfortunately has a very odd mounting bolt pattern meaning that I can’t just swap in any of the commonly available pin boxes. The wings that the pin box bolts to on my trailer do not have conventional mounting hole patterns.
I think this kit is high-quality and works really well. I have read that other people have had problems with the shocks wearing out very quickly, so only time will tell.
So far, so good. The shock kit went through a grueling trip and is still there. Installation went well with no problems.
First let me say I am being kind to give this kit 3 stars. Usually I have high praise for etailer but not so much in this case. They list this as a HD oil shock and I contacted them and asked why did everyone else list this as a gas shock but not them. They assured me it was oil and they said they even contacted Lippert (not surprised they got it wrong!) Well it is gas, which is a better shock usually but in this case I am not betting on it, they seemed cheap. I installed this kit on the rear axle of my 2016 Surveyor travel trailer and it took some engineering to get it to fit. You would think it would have fit better since it was a Lippert frame on it.
The U-bolts that came with it were too long and I ran out of threads so I used the old ones. The bottom brackets then went on without too much problem. the upper brackets had to be cut and reshaped to get them on the frame because there was a gusset welded on the frame. That was not the fault of Lippert it just happened to be in the wrong place. However getting the right amount of stroke on the shock was just about impossible. If I could have extended it (I couldn't , there was bracket in the way) it would have been more than 45 degrees and if I pulled it back to where it should have been there was only about 1.5 inches of stroke left on the shock, not enough. After a little engineering on the brackets I almost got to the half way point of stroke on the shocks. I was going to order a second kit for the front axle after I got the rear on but I think I will get out the welder and some steel and make my own for the front. I have done that kind of work my whole life and can make a lot better set than Lippert.
With all that being said a lot of folks had no problem putting this kit on and it just depends on your trailer. Just go in with your eyes open to the fact it may or may not fit very well.
Frank R.
5/22/2019
Year later, I made my own shock setup using a very common gas shock. The setup is much simple than the Lippert and allows the shock to set better angle to be more efficient. If you are thinking about adding shocks to your trailer look at all the options, do your homework. I have made a second set and will be replacing the Lippert set on the rear axle.
Arrived on time and installed easily after finding manual online. Didn't like the yellow paint on the shocks so I changed it to blue. I also replaced Wet Bolts and Shackles LC525SV, along with new Bushings K71-291-00. I haven't had a chance to try the suspension yet because of snow and ice in my area.
The two shock kits came complete with all the parts. No instructions! Had to go one line and search/hunt for info. The plates and U bolts fit well. The brackets that go on the frame would not fit without modification! I ended up driving to a camper dealer that had a toy hauler like mine with factory installed shocks. I took measurements and pics of there toy hauler. I ended up cutting the shock mounting portion off of the bolt on bracket, and then welding that on the frame, so mine now looks just like factory installed shocks. There would not have been enouph space between the tire and shock if I did not modify the bracket. It all ended up fitting perfect, and the shocks make towing very nice. It is day and night differance. I just wish this kit would have just come with the weld on top brackets, it would have saved me time and work, having to cut them off the plate. Overall, I'm happy with the kit I got.
e trailer is the best place to order for your camper, they are speedy and have great customer service.
From the Etrailer side excellent. Processed order fast online. Shipped quickly. Installed fairly easy. But time consuming drilling holes. Measured with tires on then took them off to install brackets. UPS delivered to the wrong house on next block. From the Lippert side, Each Kit bracket have five holes. Both Kits came with 8 screws instead of the needed 10. Instructions showed 10 in the picture. One bracket was rusted. Shipping box was just the right size and weight. The box held together well.
easy to order and super fast delivery. I will come to e trailer on anything I need.
Went on great no problems, Etrailer is great people to work with fast shipping , will order from them in the future
1) No instructions included. You’ll have to print off the PDF found on the e-trailer website for this product.
2) The U-bolts supplied are too long for a Grand Design 2150RB with a 3” axle. I’m going to need to purchase replacement, shorter u-bolts.
3) Then diagram of measuring the shock don’t match reality and I’ll need some guidance on that.
Getting & ordering the product through Trevor was quick, easy and delivered on-time.
Easy to put on, but it took some time to make sure everything was done right. If you have some mechanical skills you can handle this.
After being tired of the bouncy ride of just leaf springs I decided to add these to my fifth wheel. I am glad I did! It has calmed the ride and applied proper dampening to the ride making it a better tow, less stress on the springs and on the trailer. I did have to mount on the inside of the frame, just FYI.
Service and shipping was great! However the salesman "Will" was OUTSTANDING!!!!!!!!
Lippert bolt on shock kit was impossible to install on my RV that is built on a Lippert frame. The slides are in the way of attaching the top brackets. After droping the belly wrap the mechanic found that there was no space available to attach brackets on the inside either.
I have now paid a welder installer to fabricate custom brackets in order to be able to use the shocks. The other components of the kit will go into a recycle bin; waste of money.
My advice is to be certain that your trailer will be able to use the product. It may be good but I will never know.
Mike L.
6/29/2018
The Lippert Components Bolt-On Shock Kit is not a trailer specific item. It will fit many different trailer styles, but the existing structure of a given trailer may require modifications like you experienced. The product installation guidelines are linked on the product page, Id recommend taking a look at them and then examining the trailer frame where the shocks would install to make sure everything is compatible.
Easy kit to install and only need to be a little mechanically inclined.
So far so good, put one side on. Very solid hardware. Did some alterations but that's expected due to your trailer make-up. Can't wait to finish and test drive. Pictures and performance review soon.
Erik
7/11/2019
The shock kit I installed almost a year ago has been performing perfect, while traveling the trailer is much smoother over defects on the highway. Very satisfied with the product.
These fit my single axle 4000 lb trailer nicely. The shocks I’ll have test on my trip to Baja this winter. I was worried they wouldn’t fit but they did. When I was looking on line I regretted buying this set because it didn’t say what width of springs the base plate fit ! But after contacting e trailer they were able to tell me the inch 1 1/2 spring. Alls good for now. I’ll let you know back if the springs are any good !!!
Kit is a good quality and the instructions are clear. I only needed the upper brackets because my Carriage trailer came with the suspension hung under the axle with a standard auto bracket that has holes for the shocks to be attached in.
Not sure how many heavy trailers are built with the suspension hung under rather than setting up top of the axle but in my case it would have been nice to be able to chose just the upper brackets and shocks because I now have a lot of unused pieces.
These shocks are designed for a trailer with an I beam frame. I put them on a 6000 lb camping trailer that has a C channel frame. Even though I had a 3" clearance between the tire and the C channel, I had to significantly modify the upper mount to get the shocks to fit. If you have a C channel frame, your really need about 4" of clearance between the tire and frame. Unfortunately, I did not see any improvement in the way my trailer rode.
Welded the brackets on to hold the upper shocks to the frame and has been working perfectly.
This is the replacement for my old worn shocks with all the necessary hardware to mount them and the new springs. I'm glad I bought this because I had to cut the u bolts off anyway. My upper mounts were welded to the frame so I didn't use the new ones that came with the set. They fit perfectly. Would have given 5 stars but I had to bend the u bolts slightly to get them to line up with the holes in the plate. Other than that it was easy. No torque recommendations but I used a torque chart from the web. Ride is much better.
Suspension working fine. Noticed that shock absorbers were rubbing on tires occasionally, don't know if it was on backing up tight turns or what, so I have turned the Shocks upside down for more clearance.
Will know more after my next trip.
Very good product
Definitely helps with trailer "bounce"
4 stars only because I had to modify upper mounts for my particular Jayco Eagle HT fifth wheel
Do you have a question about this Trailer Suspension Part?
Condition: Surface Scratches
Notes: Parts have several scratches all around the, otherwise fine.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael G.
9/28/2019
Not too well, Bad clearance problems between the shocks and the tires. If trailer is straight and upright tires have clearance between the shocks. The tire sidewalls rub the shocks after making turns especially when backing up. Turned the shocks upside down to help alleviate the clearance problem and it helped some but does still rub the sidewall to an extent. So as not to end up buying more tires I have removed the shocks. Clearance is down to 14 inch to 12 inch.