Will the Lippert Bolt-On Shock Mount Kit Work On Snowmobile Trailer
Question:
I have an Ameralite aluminum tandem axle enclosed 7 x 19 snowmobile trailer. The trailer weighs approximately 2,000 lbs. Loaded it would be around 3,500. It is a leaf spring configuration. I am wondering if the lippert kit would work on this trailer or is it too light to be a benefit. Thanks
asked by: Rich M
Expert Reply:
I spoke with my contact at Lippert about the # LC281255 Shock Kit. He confirmed that it will help dampen road shock for your trailer, as long as you have the necessary clearance and I-beam frame to install the kit.
The Lippert Bolt-On Shock Mount Kit # LC281255 that you referenced is designed to fit 2-3/8 inch axle tubes. The kit needs 4-1/2 inches of clearance between the I-beam flange and inside of tire. An I-beam frame is needed to install the upper mounting bracket.
I have attached photos of the installation instructions for you.
If your trailer has a 3 inch axle tube, you will want the Bolt-On Shock Mount Kit # LC281281.
Products Referenced in This Question
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 3 Inch
- Single Axle
- Lippert
more information >
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 2-3/8 Inch
- Single Axle
- Lippert
more information >
Continue Researching
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 2-3/8 Inch Axles
- Search Results: trailer shock kit
- Search Results: trailer shocks
- Search Results: 3500 leaf spring
- Search Results: trailer shock
- Search Results: lippert shocks
- Q&A: Will Trailer Shock Kit Lessen the Trailer Effects on a Bike Rack at the Back of the Trailer
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
- Q&A: Will Adding Shocks to Trailer Suspension Reduce Chance of Springs Breaking
- Shop: Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 3,500-lb Axles
- Video: Review of Lippert Trailer Leaf Spring Suspension - Bolt-On Shock Mount Kit - LC281255
- Q&A: What Causes a Trailer to Bounce Up and Down
- Search Results: air shocks
- Search Results: trailer shock absorbers
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Shop: Thule Range RV Bike Rack for 4 Bikes - 2" Hitches
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 3 Inch Axles
- Q&A: How to Position the Lippert Shocks on a Single Axle Trailer
- Q&A: Installing Lippert Bolt-On Shock Mount Kit on Forest River Toy Hauler with Axle Above Leaf Springs
- Shop: Trailer Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Article: Most Popular Wheel Bearings
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Article: Trailer Tire Sizing
- Shop: Brake Controller