#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

See what our Experts say about this TruRyde Trailer Spindles

• Recommendation of Trailer Hub and Drums and Axles
  The trailer hub and drum assembly # 845476UC3 includes bearings and races from Redline. They are made in China. I would assume you have 5 on 4-3/4 inch bolt pattern but you will need to replace the spindle. Welding on a new spindle is a precision trade craft requiring a special jig installed by an experienced professional. Otherwise, you could continue having the same problem. Depending on the overall length and if you currently have a round or square, that will determine which spindle...
  view full answer...
• Available Complete Replacement Axle Kits
  Thank you for providing your hub's bearing numbers # 15123 and 09067. We do not have a hub that uses 15123 as inner and 09067 as outer bearings. Your alternatives are to cut off your existing spindles and install spindles like # TRU84FR that would be compatible with a standard hub like # 84545BX; or you could replace the entire axle. I linked our main page for complete trailer axle kits, some of which include hubs or drums and even electric brakes. For instance, part # e43SR is a complete...
  view full answer...
• Replacement Spindles For 3,500LB Trailer Axle With Tapered Spindle with 1-1/16" & 1-3/8" Bearing ID
  We do have the following replacement spindles that will fit on your axle. #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter # TRU24FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU84FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR
  view full answer...
• Replacement Hub for Trailer With Timken 158123 Inner and 09067 Outer Bearing
  I looked through our selection of hubs and hub/drums, and couldn't find anything compatible with the bearings you mentioned. This leaves you with two alternatives. Number one would be to cut off your existing spindles and install spindles like # TRU84FR that would be compatible with a standard hub like # 84545BX. The hub has the same number of lugs and bolt circle as your existing hubs, so you could use the same wheels. Removing the old spindles and welding the new ones into place is best...
  view full answer...
  
• Replacing a Hub on a #84 Spindle
  Being off as little as it is, the hub may just be getting caught on something. Remove the hub from the spindle to make sure there is nothing that could be catching the inner bearing. Next, install just the inner bearing # L68149 making sure it gets all the way to the correct location on the spindle, which should measure 1.378 inches. Once that is in place, slide the hub on making sure it seats completely on the rear bearing and holding it in place. Then slide the outer bearing # L44649...
  view full answer...
• Welding #84 Spindles # TRU84FR and # TRU57FR for Utility Trailer with 2-3/8 inch O.D. Pipe
  You have a 2-3/8 inch O.D. pipe so you might want to look at #84 Spindle, # TRU84FR, which has a 2 inch O.D. at the weld point and has a 1750 lb. capacity, so two spindles will give that axle 3,500 lb capacity. The #42 Spindle, TRU57FR which has a 2.25 inch O.D. at the weld point and is rated for 5,200 lbs to 7,000 lbs axles. The total capacities of the spindles are only valid if installed correctly and the axles are not broken or damaged in any way. The TruRyde #84 Spindle, # TRU47FR,...
  view full answer...
• Spindle Replacement Recommendation For Donahue Horse Trailer
  In order to make sure you get the right components for your Donahue Horse Trailer, we will need some more information. If you are wanting to replace the spindle, the first thing you will need to know is the weight capacity and dimensions of the axle you plan on using the spindle on. Please keep in mind that installing the spindle require welding it to the axle by a certified welder. They use special jigs so that it is concentric and square on the axle or it can cause problems with uneven...
  view full answer...
• Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
  First, it does sound like, based on the measurement and information you have provided, that race # L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing # L68149 which has an inner diameter of 1.378 inches and fits a number 84 spindle. On these spindles the diameter where the seal goes is 1.73 inches such as # TRU84FR. The seal should be a tight fit. I once had a heck of a time pulling a hub off of a trailer that was held on by the seal only!...
  view full answer...
• Is Dexter Trailer Hub 84545UC1-EZ Compatible with Spindle # TRU74FR
  Yes, trailer hub # 84545UC1-EZ is a fit for spindle # TRU84FR. This is a number 84 spindle that takes the same bearings and seals that are included with the hub. However, the hub is an EZ lube hub and the spindle is not. For a compatible EZ lube spindle use # TRU74FR. This spindle also has a brake mounting flange.
  view full answer...
• Do I Need to Replace #84 Spindle With Rust On Surface and What Bearing Kit Do I Need
  You should still be able to use your spindle without having to replace anything, especially because this is not in the seating areas for the bearings. Regardless, I recommend cleaning off the spindle with emery cloth to try to remove as much of the rust as possible. You'll want to take care to make sure that there is no pitting on the spindle that might damage the new bearings, which would be the only case that I recommend replacing the spindles. If you do end up needing to replace your...
  view full answer...
• Replacement Spindle and Hub for my Lippert 3500# Axle
  The #84 Spindle for 3,500-lb Trailer Axles part # TRU84FR and the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-550-35-K for a 5 on 5" wheel bolt pattern or the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K for a 5 on 4.5" bolt pattern will have you set up and ready to go.
  view full answer...
• Availability of Trailer Axle #84 Spindle without Grease Fitting
  Not all of the spindles we offer have the zerk fitting for pushing grease into the hub but they all do at least have the hole drilled into the end of them like the TruRyde part # TRU84FR.
  view full answer...
• Replacement Hub For Boat Trailer Using Bearings L68149 And L44649
  The closest we have is Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K. This uses inner bearing L68149 (1.378" inner diameter) and outer bearing L44649 (1.063" inner diameter) that you currently have. It also has the outer race L44610 that you have. There is not a hub available that has the inner race L68110 that you have which measures 2.327". This kit includes inner race L68111 which measures 2.361". You can stick with your current...
  view full answer...
• How to Grease Trailer Bearings and Spindle without EZ Lube Axle and Spindle
  If you don't have an EZ-Lube spindle on your axle then you'll need to remove the hub, remove and repack the bearings, races and seals manually. Standard trailer bearings should be re-packed and greased every 10,000 to 12,000 miles in normal towing conditions; if you're routinely towing at maximum load or live in an extremely warm and dry area it might be less than that. This will be the only way to properly grease the bearings and spindle to perform this routine maintenance. If you don't...
  view full answer...
• Recommended Replacement Disc Brakes For A 2008 Trail-Rite With UFP DB-42 Brakes
  From the pictures you provided, you have a UFP DB-42 disc brake set up on your 2008 Trail-Rite. This isn't something we carry, but it looks like these systems use the # L68149 inner bearing and the # L44649 bearing, so you do have a common spindle for a 3,500 pound axle. With that said, we do have the Kodiak Disc Brake Kit # K2HR35DS that looks like it would be a perfect replacement. This is rated for 3,500 pound axles and will use these same bearings, though not included so you will need...
  view full answer...
  
• Are #84 Spindles Threaded into the Axle?
  No, they're welded. You assumed correctly. The spindles listed below that I referenced in your previous question all have to be welded on. There are no thread on spindles. #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter item # TRU24FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter item # TRU84FR Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide item # TRU47FR
  view full answer...
• Recommended Idler Hub w/ a 5 on 4-1/2 Bolt Pattern to Replace a Hadco Drum
  We have ran into your request before. So I have an interesting solution. Your Hadco Drums use a Replacement Trailer Hub Bearing item # 501349 and a Replacement Trailer Hub Bearing item # LM67048. We have no hubs whatsoever available for this combo let alone ones as specific as you are requesting. In order to add a idler hub with a 5 on 4-1/2" bolt pattern like item # AKIHUB-545-35-K you are going to have to replace your spindles with one of the following options: #84 Spindle for 3,500-lb...
  view full answer...
• Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
  I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K if you have the grease zerk integrated in the spindle. Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend using...
  view full answer...
• Which Trailer Spindles Fit Trailer Hub Assembly # 84555UC1
  I have three options that will fit Trailer Hub Assembly # 84555UC1, for 3,500 lbs. Part # TRU64FR is a standard 1-3/4-inch round spindle that measures 8-1/4" in overall length. Part # TRU84FR is a standard 1-3/4-inch round spindle that measures 11-1/4" in overall length. Part # TRU74FR is an EZ lube 1-3/4-inch round spindle with a grease zerk that allows you to pump grease internally into the spindle. It also contains a brake mounting flange. It measures 9" in overall length. Installing...
  view full answer...
• Material Used and Tensile Strength of TruRyde Spindle # TRU84FR
  According to TruRyde, the bar stock material used on spindles like # TRU84FR is SAE 1045 hot rolled. This allows the spindle to harden to an extent, but it is a medium tensile steel with a tensile strength of 570-700 MPa and Brinell hardness ranging between 170 and 210. The spindle is designed to retain a slight amount of flex to retain its durability when a trailer goes over a bump or through a hole in the road. TruRyde Spindle # TRU84FR is rated for use on 3,500 lb axles.
  view full answer...
• Trailer Spindles, Hubs, Wheels and Tires For Building a Specialty Cart
  You will need the #84 Spindle # TRU84FR to weld on to your cart. The weldable end of the spindle is 1-3/4" in diameter and 6-1/2" long. This will accept a Trailer Idler Hub Assembly # AKIHUB-545-35-K which has the 5 on 4-1/2" lug pattern for your higher weight capacity. This assembly contains all the bearings, races, grease seal and dust cap needed for the #84 Spindle. The Bearing Buddy Bearing Protectors # BB1980A-SS will allow you to easily fill your hubs with grease and will give you...
  view full answer...
• What is the Correct Spindle for use With Kodiak Hub-and-Rotor Assembly KHR10
  You will need to use a spindle that fits the bearing set in the Kodiak Hub-and-Rotor Assembly KHR10. This hub uses inner bearing # L68149 and outer bearing # L44649. The spindle that fits this bearing set is part # TRU84FR from TruRyde. This includes the spindle, washer, castle nut and cotter pin.
  view full answer...
• Adding Jeep Wheels and Tires With 5 on 5" Bolt Pattern To 4' X8' Harbor Freight Trailer
  I do have a solution for you as currently our only only 5 on 5 hubs fit a larger # 84 Spindle # TRU84FR and the Dexter Axle # 20545I-ST-60-15 in your size only comes with the smaller BTR Spindle # TRU44FR. The Timbren Axle-Less Trailer Suspension System # ASR1THDS02 with a straight spindle or Timbren Axle-Less Trailer Suspension System # ASR1THDS03 with a 4" lift spindle will give you the best performance for your Harbor Freight trailer. These systems will replace your axle and suspension...
  view full answer...
• Replacement Axle for a 1991 Lowe Boat Trailer
  None of the spindles we carry have the same measurements as what you have. The only real recommendation I could make would be to replace the axle since by the time you buy the spindles, have them professionally installed and get the correct hubs you're almost at the same price as just getting a new axle. In order to recommend an axle assembly for you, I'll need some more information. First, you will need to ensure that the existing wheels and tires you are using are rated for the extra...
  view full answer...
  

Do you have a question about this Trailer Spindle?