Welding #84 Spindles # TRU84FR and # TRU57FR for Utility Trailer with 2-3/8 inch O.D. Pipe
Question:
I have an old camper frame that I am converting to a utility trailer that has a axle. The axle part is welded into a piece of 2 pipe. 2 3/8 O.D. What I would like to know is do you sell these pieces so I can weld them into a new piece of pipe. My nephew ground the old ones off the old pipe and he butchered up the old ones. It would be a whole lot easier for me to buy new ones to help me keep things square. Thanks
asked by: Jimmy A
Expert Reply:
You have a 2-3/8 inch O.D. pipe so you might want to look at #84 Spindle, # TRU84FR, which has a 2 inch O.D. at the weld point and has a 1750 lb. capacity, so two spindles will give that axle 3,500 lb capacity.
The #42 Spindle, TRU57FR which has a 2.25 inch O.D. at the weld point and is rated for 5,200 lbs to 7,000 lbs axles. The total capacities of the spindles are only valid if installed correctly and the axles are not broken or damaged in any way.
The TruRyde #84 Spindle, # TRU47FR, has a square stub which would not work as well in the 2-3/8 inch O.D. round pipe.
I hope this info will help you get your trailer up and running.
Products Referenced in This Question
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Most Popular Wheel Bearings
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Q&A: Removing and Replacing Trailer Spindles
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Can Bias Ply Trailer Tires Be Used On Long Trips
- Article: Where to Position the Trailer Axle?
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern