Do I Need to Replace #84 Spindle With Rust On Surface and What Bearing Kit Do I Need
Question:
I have a band of rust on my #84 spindle in the region between the inner and outer bearing seats. The bearing seat regions are free of rust. Does the spindle or axle need to be replaced? This is a single axle utility trailer with a 3500 lb axle.
asked by: Mike
Helpful Expert Reply:
You should still be able to use your spindle without having to replace anything, especially because this is not in the seating areas for the bearings. Regardless, I recommend cleaning off the spindle with emery cloth to try to remove as much of the rust as possible. You'll want to take care to make sure that there is no pitting on the spindle that might damage the new bearings, which would be the only case that I recommend replacing the spindles.
If you do end up needing to replace your #84 spindle, the #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU84FR will work for you if your axle is 1-3/4" diameter; if you've got a 2" diameter axle the #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter # TRU24FR would be the correct replacement.
If you need replacement bearings and seals, the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100 kit is an all in one kit to replace everything in your hub.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearaing Kit For A 2013 Ranger Tandem Axle Boat Trailer
- Video: Review of TruRyde 1 Inch Diameter Trailer Spindle Castle Nut - 165686
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Washer For 1" Spindle
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Search Results: video
- Search Results: castle nuts
- Search Results: l44643
- Video: etrailer Hub And Drum Assembly Installation
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Trailer Spindle Nut 1"
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: Washer and Castle nut for 1 Inch BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How to Pick Out Bearings for a Trailer Hub
- Q&A: Is Washer Needed When Installing BT8 Bearing Kit on Trailer Axle
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: LubriMatic Wheel Bearing Grease Review
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Search Results: high temp bearing grease
- Search Results: castle nut
- Search Results: castle nut washer
- Search Results: cotter pins
- Video: Dexter Electric Trailer Brake Kit Installation