Trailer Spindles, Hubs, Wheels and Tires For Building a Specialty Cart
Question:
Hello, I need a product specialist contact to confirm compatibility of axles and hubs. We are designing a specialty application cart and one end will use trailer wheels & axles (Two wheels and axles). We will need to weld the axle to our cart prior to assembling the remainder of the hub. I will need a corresponding axle stub and hub. Preferably 5 bolt with higher capacity. No brakes. Plan on using Kenda 205/65-10 wheels and tires. Kindest Regards
asked by: Esmo K
Expert Reply:
You will need the #84 Spindle # TRU84FR to weld on to your cart. The weldable end of the spindle is 1-3/4" in diameter and 6-1/2" long. This will accept a Trailer Idler Hub Assembly # AKIHUB-545-35-K which has the 5 on 4-1/2" lug pattern for your higher weight capacity. This assembly contains all the bearings, races, grease seal and dust cap needed for the #84 Spindle.
The Bearing Buddy Bearing Protectors # BB1980A-SS will allow you to easily fill your hubs with grease and will give you a visual indication that the hubs are full. These will replace the standard grease cap that is included with the hub assembly.
The Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel # AM3H430 are load range D tires giving each wheel and tire a maximum load rating of 1,320lbs per tire.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range D
- 205/65-10
- 10 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Dexter Axle Disc Brake Calipers that have 89-5 Stamped on Them
- Q&A: Replacement Spindle and Hub for my Lippert 3500# Axle
- Q&A: Can Leaf Spring # e22YR be Used with Square Axle Trailer
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Q&A: Drag Roller Recommendation for Boat Trailer with Prop Protector Cut Out
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Maintenance Schedule
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices