Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
Question:
I have a dexter axle that has had bearings and spindle chewed up , I have the hubs they are 5x5 they use 10-19 seal inner bearing of 68149 ,and outer bearing of 44649 the axle I have is a dexter axle numbers on the tag are p-21 model- SLR and s/n D 7020847 center of spring seat to center of spring seat is 76 inches , from what I can measure hub to hub is 91 inches I do not want to spend 600 + for differant axles I just want the same axle I have
asked by: Josh
Expert Reply:
I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K if you have the grease zerk integrated in the spindle.
Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend using the Timbren Axle-Less Trailer Suspension System. This will replace your axle and your suspension allowing custom lengths with assemblies that attach directly to the trailer frame. Then you will need a 2 inch square bar not included to span the assemblies using the integrated holes.
Here are a few of the options:
Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs -5 on 4-1/2 # A35RS545E
Timbren Axle-Less Trailer Suspension System w Hubs -5 on 4-1/2 # A35RS545
Timbren Axle-Less Trailer Suspension System - Straight Spindle Only # ASR3500S05
If you need a lift or drop spindle or a different hub bolt pattern I've attached a link to assist.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Pick Out Bearings for a Dexter P-21 SLR Axle
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Search Results: l44649
- Search Results: 10 19 seal
- Search Results: l68111
- Search Results: l68149
- Search Results: l44610
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: Grease Seal
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU87FR
- Search Results: red round reflector
- Search Results: c31078
- Shop: Screw Mount Reflector for Truck or Trailer - 3-3/16" Round - Red - Qty 1
- Q&A: Weight Capacity of Dexter P-12 Model SLR Axle
- Q&A: Troubleshooting Trailer Brake Assembly that Locks Up When Spun Forward
- Q&A: What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Tire Sizing
- Q&A: Dexter P-15 SLR Axle SN D4484069 Weight Capacity and Replacement Axle
- Video: Optronics Trailer Lights - Clearance Lights - MC42RB Review
- Article: Trailer Wiring Diagrams
- Article: Testing Brake Controls
- Q&A: Wiring Diagram for Dexter DX Series Electric Over Hydraulic Brake Actuator
- Q&A: Dimensions of Spindle on 3,500 Pound Dexter Trailer Axle
- Shop: Vehicle Lights
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller
Josh
5/2/2019
I have a dexter axle that has had bearings and spindle chewed up , I have the hubs they are 5x5 they use 10-19 seal inner bearing of 68149 ,and outer bearing of 44649 the axle I have is a dexter axle numbers on the tag are p-21 model- SLR and s/n D 7020847 center of spring seat to center of spring seat is 76 inches , from what I can measure hub to hub is 91 inches I do not want to spend 600 + for differant axles I just want the same axle I have