bing tracking image
Customer Service My Orders
Q & A Icon

Recommended Idler Hub w/ a 5 on 4-1/2 Bolt Pattern to Replace a Hadco Drum  

Question:

I want to replace my hadco drums with idler hubs. Spindle diameter at inside is 1.63” and outside 1.25. Outer bearing number 4T-LM67048 NTM . Couldn’t read the inside. I just want to convert to hubs and will need wheels and tires also 5x4.5

0

Expert Reply:

We have ran into your request before. So I have an interesting solution. Your Hadco Drums use a Replacement Trailer Hub Bearing item # 501349 and a Replacement Trailer Hub Bearing item # LM67048. We have no hubs whatsoever available for this combo let alone ones as specific as you are requesting.

In order to add a idler hub with a 5 on 4-1/2" bolt pattern like item # AKIHUB-545-35-K you are going to have to replace your spindles with one of the following options:

#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter item # TRU24FR

#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter item # TRU84FR

Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide item # TRU47FR

For a set of wheels and tires that have a 5 on 4-1/2 lug pattern we have a ton of options. I have listed the best ones below based on wheel size:

12" - Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel item # AM35354

13" - Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel item # AM31990

14" - Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel item # AM32131

15"- Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel item # AM32424



expert reply by:
0
Jerred H
Ask The Experts a Question >>

Products Referenced in This Question










Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>