Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
(229 reviews)
Price: $31.43
In Stock
Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
Item # STL211XRFHB
Retail:$59.25
Our Price: $31.43
You Save: 47%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (229)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL211XRFHB
- Tail Lights
- Oval
- LED Light
- Red and White
- 7-1/2L x 3-1/4W Inch
- Surface Mount
- Stop/Turn/Tail/Backup
- Submersible Lights
- Optronics
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.
Features:
- Oval trailer tail light serves 4 functions
- Stop light
- Tail light
- Turn signal light
- Built-in backup light eliminates the need to cut holes in your trailer for 2 lights
- Sonically sealed, waterproof housing and lens unit is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows improved heat distribution and thinner construction
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate lens and housing
- Red lens set inside white lens with red and white LEDs
- Red lens with red LEDs for tail light
- Clear lens with white LEDs for backup light
- Mounts on surface of trailer with built-in black flange - hardware not included
- 4-Wire pigtail
- White wire for ground
- Brown wire for backup light
- Red wire for brake light
- Black wire for tail light
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep
- Light face dimensions: 6-1/2" wide x 2-1/4" tall
- Wire length: 8"
- Diodes: 16
- Power draw at 12.8 volts:
- Stop/turn light: 0.265 amps
- Tail light: 0.24 amps
- Backup light: 0.3 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-Mount Light
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
STL211XRFHB Optronics Fusion Combination LED Trailer Taillight w/ Built-In Reverse Light - 16 Diodes - Red/Clear Lens
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens - STL211XRFHB
Average Customer Rating: 4.7 out of 5 stars (229 Customer Reviews)
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.by: jeremy01/05/2022
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
by: Brenda 04/27/2024
Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
by: Christopher10/16/2023
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
by: Dar B.06/13/2017
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
by: Cody 03/29/2024
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
by: John 09/29/2023
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
by: Carmen 10/02/2023
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
by: Taylor05/02/2024
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
by: Michael 04/20/2024
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
by: Monty08/19/2023
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
by: Brien06/16/2019
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
by: Jacob03/18/2018
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
by: James 11/02/2023
Works great so far no issues nice and bright not had a bulb blow out yet!
by: Pete P12/27/2019
I purchased these to spruce up an old fold-out tent trailer that I bounce around out in the hills. They were easy to install and draw almost no current compared to the old incandescent lamps.
I wired it so when I'm camped, I can run the reverse lights on the trailer battery to light up the camp site instead of having to carry around a flash light.
Great value, and they work well also. You can't go wrong with etrailer lights.
Pete P.
12/28/2020
OK, its been a year now so let me tell you what I think. These are just as bright as the day I installed them on the trailer. The plastic lenses are still clear where theyre supposed to be clear and red where theyre supposed to be red. Nothing has faded or cracked. As trailer lights they are working great. As camp lights its working as planned. Im still saying these are a great value. Order them, you wont be disappointed.
by: Claudiette08/07/2023
Need to return. Turns out my trailer only has 2 wires, tail stop and signal. backup will require additional wiring.
by: CK07/22/2023
Used on our off-road teardrop trailer. Install was easy. Quality appears robust. Holding up well after a year, though half that time was sitting as we had a long winter here this year.
by: Fred 08/16/2018
Used these on my 1985 custom pickup truck flatbed conversion, they look good and are very bright. Only complaint is that the wires come out of the unit in a "straight line " so you either have to "mill" a slot in the mounting panel or drill a large hole.
by: Javier 02/17/2024
I received the right product on time thanks excellent service too.
by: Mike06/01/2021
Running strong. The original was broken off beyond repair. These lights last a long time, you can almost rule out the light during troubleshooting.
by: Alexandru05/30/2023
It was the best thing to shop at this online store. Best prices at the best quality!!! Thank you!!!
by: Jeff 09/01/2023
Not sold in pairs, don't make the same foolish assumption that I did and make sure you order 2 of them. The one I did purchase works great!
by: Ryan07/11/2019
These lights are fantastic and a direct replacement on my EZ Loader boat trailer. Just had to drill the screw holes and attach wires. Done deal.
The LED lights are good and bright, and the back up lights serve their purpose perfectly.
by: Chuck 06/26/2023
sorry, i did not get to see it. our receiving dept took care of it and picked for our mobile fleet tech who picked up before i start shift.
by: Carl03/28/2022
It's a great light! Just be aware that the backup light won't work with a 4-flat wiring harness. I didn't know that, and now I have to add an extra line just for the reverse light.
by: Matthew 04/29/2020
The gasket around the light itself is plastic. It would be much better if used if a rubber grommet fitting. But the LED light is perfect for visibility. The white/clear reverse light is great when backing.
25
229
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Troubleshooting the Fusion LED Trailer Tail Light STL211XRFHBIn regards to the Fusion LED Trailer Tail Light part # STL211XRFHB; the white wire is for ground, the black wire is for running, the red wire is for stop/turn, and the brown wire is for reverse. The wire colors on the trailer can differ from manufacturer to manufacturer but they are usually; white for ground, brown for running, green for right stop/turn, yellow for left stop/turn, and purple/yellow for reverse (if applicable). Therefore, it sounds like you might have a simple wiring mix...
view full answer... - Is There An Optronics Fusion GloLight LED Trailer Tail Light With Red LensThe light you are looking for which is the same as the GloLight LED Trailer Tail Light - Clear Lens # STL1211RCFHPG but has a red and clear lens is the Fusion LED Trailer Tail Light - Red/Clear Lens # STL211XRFHB. I do want to note that both tail lights will provide red and white lighting, with red for the tail lights and white just for the back-up lights. Both are also completely submersible with waterproof housing that won't damage the LEDs. I have added links to a couple video reviews...
view full answer... - Does the Amount of Diodes in an LED Dictate Overall BrightnessThe number of diodes can help make an LED brighter but the diodes can also be brighter or dimmer themselves so it's not totally dependent on the number of diodes. I've seen really big single diodes that are super bright outshine lights with several diodes. Like I have LED headlights in my car and they are one really big diode and they incredibly bright.
view full answer... - Availability of 7-1/2 Inch Oval Trailer Taillights With Separate Brake Lamp and Turn Signal CircuitsWe don't offer a 7-1/2 inch oval taillight that's compatible with a 'separate' taillight system. Everything we offer is designed for a typical combined system that carries the brake lamp and turn signal on the same circuit. It could be possible to wire the # STL211XRFHB as a separate system, but the turn signal indicator would be white light which would get you in trouble with the DOT or law enforcement, so I wouldn't recommend doing that. I wouldn't give up on the taillight converter....
view full answer... - Recommended LED Trailer Tail Lights for 24 Volt Military TruckThe trailer tail light I recommend that is compatible with a 24 volt electrical system is the Miro-Flex LED Trailer Tail Light part # STL23R24B which has stop, turn, and tail signals. If you would like to add reverse lights as well then you can use the LED Backup Light part # BUL11CM24B. We do not have an all in one set of trailer lights that are compatible with a 24 volt electrical system. Unfortunately, most of our trailer lights are only compatible with a 12 volt electrical system like...
view full answer... - Installing the Fusion LED Trailer Light # STL211XRFHB on a 2017 Subaru ImprezaTo install the Fusion LED Trailer Light # STL211XRFHB on your 2017 Subaru Impreza I recommend using the Deka Bonded 4 Wire # 16-4B-1 which is sold by the foot. You can then use Butt Connectors # DW05744-10 and Quick Splice Wire Connectors # SWC501746-1 to connect the wiring to appropriate functions. Your Fusion LED Trailer Light pigtail wiring will connect to your Impreza's light functions as follows: White wire for ground Brown wire for backup light Red wire for brake light Black wire...
view full answer... - Is Fusion LED Trailer Tail Light # STL211XRFHB Sold IndividuallyThe Fusion LED Trailer Tail Light # STL211XRFHB that you referenced is sold individually. If you needed a pair you'd need to order a quantity of two.
view full answer... - Wiring Optronics Fusion STL211XRFHB LED Trailer Tail LampDo you mean it has two white wires in addition to the power wires for the turn/brake and running lamp circuit? If so you can simply attach the ground wire for the # STL211XRFHB lamp to both white ground wires on the trailer. This assumes they're both ground wires. You might want to use a circuit tester like # PTW2993 on both wires as you test all the taillight functions to make sure they're both ground wires. On the lamp, the wire color codes are as follows: -White wire for ground -Brown...
view full answer... - Submersible Trailer Taillight with Stop, Tail, Turn and BackupHey David, so I attached a link to all of the submersible lights we offer that have white and red lenses as that would cover everything you mentioned. For a surface mount we have the part # STL211XRFHB or part # OPT37FR or for something that is recessed we have the part # STL211RB.
view full answer... - Tail Light replacement for Kaper L16-0053The closest replacement taillight that we have to the light that you have is the Fusion LED Trailer Tail Light # STL211XRFHB. This tail light has the back-up light feature that yours also has. The difference is in the dimensions. The size of this light is 7-1/2" wide x 3-1/4" tall x 3/4" deep.
view full answer... - Is the Fusion LED Trailer Tail Light Sold As An Individual Light or Set? The Fusion LED Trailer Tail Light # STL211XRFHB is for a single light. To operate the reverse light you will need a 5-wire or 7-wire trailer connection.
view full answer... - What Functions Would Tail Lights with 4 Wires UseThank you for the info! It sounds like your tail lights have the stop, turn, tail (running), and reverse functions similar to the Fusion LED Trailer Tail Light # STL211XRFHB. This means that one wire is for the stop and turn functions, one wire is for ground, one is for the tail/running function, and the other wire is for the reverse function. The light that you sent in a picture of doesn't look like anything we have on our site so I'm not able to confirm what wires are for what functions...
view full answer... - Watts of Optronics Lights ILL86BCB, STL211XRFHB, & MCL165RBSure thing; the Optronics LED Step Light # ILL86BCB is 2.176 watts, the Fusion LED Trailer Tail Light # STL211XRFHB is 3.84 watts, and the GloLight Thinline LED Light # MCL165RB is 1.152 watts.
view full answer... - LED Light Kit that Can be Used with Reese Cargo Carrier # 63153We have an LED light kit that can be used with the Reese cargo carrier part # 63153 with the part # 98174LED but the # STL211XRFHB that you referenced would not fit it.
view full answer... - Power Issues When Installing LED Lights to Replace IncandescentsThe Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens # STL211XRFHB will function off the same 12V of a van as the 12V of a trailer so you shouldn't have any issues. There is a difference in amperage when using LED lights as they don't draw the same power, so if you are getting flashing then you will use the Load-Resistors # DI34ZR or the Optronics Load Resistor for LED Lights - Male PL-3 Plug and Pigtail - Qty 1 # ALEDRST1B to help with the...
view full answer...
- How to Determine Correct Replacement Taillight Lens for 2007 Forest River Flagstaff Super Lite TTIt's not possible to look up which particular taillight lens your Forest River Flagstaff Super Lite uses, as there isn't a database of that information, but we very well might have a solution for you. From what I found online, the Optronics # AST61B was mentioned several times as being the proper replacement lens that's compatible with either the driver or passenger side taillight. You can confirm this by checking the housing of your lamp with the cracked/broken lens. If the lamps you...
view full answer...
- Comparing Fusion LED Trailer Tail Lights Part STL211XRFHB and Part OPT37FRThe main difference between the Fusion LED Trailer Tail Light part # STL211XRFHB and the Fusion LED Trailer Tail Light part # OPT37FR is that the stop/turn signal portion of the former is a red lens with red LEDs and the latter is a white lens with red LEDs. The white lens with red LEDs will be brighter/clearer hence the price increase. I recommend the latter as our best option for clarity.
view full answer... - Wire Gauge of Fusion LED Trailer Tail Light # STL211XRFHBThe wire gauge of the Fusion LED Trailer Tail Light # STL211XRFHB that you referenced is 18 gauge.
view full answer... - 24V Trailer Taillight With Stop/Turn/Taillight/Reverse Lamp FunctionThe Optronics # STL201RFMB LED trailer taillight you'd looked at is compatible with 12V systems only. For a 24V round surface mount submersible taillight, I'd recommend # STL90R24B. These taillights offer the stop/turn/taillight function, but not reverse lamps. We have a 7-1/2 x 3-1/4 inch oblong LED lamp, part # STL211XRFHB that is submersible, is a surface mount lamp and offers the stop/turn/running and reverse lamps. The lamp will work with 12 or 24V DC.
view full answer... - 7-Way Connector and Fusion LED Trailer Lights Functions by Wire ColorI can tell you which wires on each the light and plug are for, though you will want to use a circuit tester such as # PTW2993 to verify the functions. The Fusion LED Trailer Taillight # STL211XRFHB has a 4-wire pigtail. The white wire is ground, brown wire is backup light, red wire is brake light and black wire is taillight. The Epicord 7-Way Molded Trailer Plug # 277-000143 is a 7-way connector that has the same functions as you see in the accompanying diagram. The yellow wire on this...
view full answer...
- Installing The Fusion LED Trailer Light # STL211XRFHB On A 2009 Chevrolet Silverado 1500The Fusion LED Trailer Light # STL211XRFHB will work on your 2009 Chevrolet Silverado 1500. When installing The Fusion LED Trailer Light # STL211XRFHB on your 2009 Chevrolet Silverado 1500 I recommend using The Deka Bonded 4 Wire # 16-4B-1 which is sold by the foot. Then you can use the Butt Connectors # DW05744-10 and the Quick Splice Wire Connectors # SWC501746-1 to connect the wiring to the appropriate functions. The Fusion LED Trailer Light pigtail wiring will connect to your Silverado's...
view full answer... - How Many Lights Are Included with Optronics Fusion LED Trailer Tail Light # STL211XRFHBThe Optronics Fusion LED Trailer Tail Light # STL211XRFHB referenced in your question is sold as a single unit. If you need the pair you will just want to order 2 when checking out on the site. This is a really nice LED tail light with stop, tail, turn signal, and backup light functions. It features durable surface-mount technology to better withstand road shock and its sonically sealed waterproof housing is submersible. I have attached a short video review that you can check out as well.
view full answer... - Replacement Tail Light For A 2016 Lance Travel TrailerWe do offer a light that looks very similar # STL211XRFHB. This may not be a direct replacement but it is a very similar LED trailer light. The light itself measures overall 7-1/2" wide x 3-1/4" tall x 3/4" deep. The light face is 6-1/2" x 2-1/4". It uses a 4 wire connection. If you are able to measure the current light, we can definitely narrow down a replacement.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Amy B
Video Edited:
Chris R
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dar B.
6/13/2018
Lights are still functioning as they are supposed to. Have had no issues with them.