Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
16" Long x 1-1/2" tall x 1-5/8" thick. Waterproof, incandescent identification light bar is designed for trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail with 50" leads. P2 Rated.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck Lite # 15745R
Grote # 49172
Peterson # 150-3R
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Optronics 16 inch long incandescent identification light bar for trucks and trailers, and it has the red lenses. Now, this is an identification light bar for your truck or your trailer, and trailers that are measuring 80 inches or wider will require identification lights for additional visibility. Basically, you'll mount this clearance light bar on the top of your truck or trailer or between the taillights to draw extra visibility to the wider trailer for added on road safety. The lights are P2 rated lights. They produce a 90 degree beam pattern.
And this light bar is DOT compliant, which is Department of Transportation. If you notice, it has the three rectangular incandescent lights that have the red lens on it. And what's nice about those lights is they are easily replaceable. They're attached to the base. If one happened to burn out and you need to replace it, you just pull these tabs on each side and it'll pop right out and then you can pop the other one into place.
We do sell these lights separately. They're part number A91RB. Now, this is a durable, sealed, and waterproofed polycarbonate housing and lens. It is compatible with 12 volt DC systems. It is designed to surface mount to your trailer.
Now, the hardwood install is not included. There's two holes here that you put your screws in, but again, you would have to supply that. It is a two-wire pigtail design. It includes a 50 inch long power wire and then a short white ground wire. Now, I do have this hooked up to some 12 volt power.
Just to show you, we're gonna turn these on, show you how bright the lights are. So I'll go ahead and flip on the power. You can see the incandescent lights come on. To give you an idea, we'll turn off the overhead lights and you can see how the lights light up. Go ahead and turn back on our overhead lights. Go ahead and turn off our power. We're gonna disconnect it. I'm gonna give you some dimensions on this. The overall length from one end to the other, we put our tape measure on it, it's gonna be right at 16 inches long. The width of it is gonna be right at 1-1/2 inches wide. And the depth, in other words from the front, let's go down here from the front of the light to the very back is gonna be right about 1-5/8 inches deep. Now, the distance between these mounting holes center to center is about 7-1/2 inches. And the power draw on this light at 12.8 volts is about one amp. But that should do it for the review on this Optronics 16 inch long incandescent identification light bar for trucks and trailers and these have the red lenses.
Average Customer Rating: 4.8 out of 5 stars (85 Customer Reviews)
16" Long x 1-1/2" tall x 1-5/8" thick. Waterproof, incandescent identification light bar is designed for trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail with 50" leads. P2 Rated.
So far so good with this product. No different than the factory version on my
Stratos Trail trailer. Only wish the material was more durable. Not all boat ramps have the save degree. I recommend being careful because the product is plastic.
Exactly what I needed!
Great product light bar i ordered came in two days couldnt be happier with it i will be ordering from u guys again
Good price
Just what i needed to replace my broken lense. fit perfectly!
Susan B.
7/8/2023
great, just like new!
Had to replace the entire clearance light bar because the light clips broke off on the center light. This was an easy replacement and am hopeful that these clips won't break ;o)
Sandra
10/20/2017
Still holding up even in the harsh Colorado weather. Highly recommend.
I've searched many auto parts stores, catalogs and on the internet for this light.The light is made well,is prewired.Was the best price.I'm replacing an old metal tri light.
Steve
4/4/2014
The triple light has survived the long cold and deep snow here in NW New Jersey.The trailer was parked outside.Still looks good.
Decent product for the price. Cheap plastic but it works as designed. Installed easily. Be sure not to pinch/scrape the wires when installing the mounting screws.
Dave B.
4/11/2015
Work as designed and seem to be durable. They still work, have not faded and have been great for the price.
Item is great I found at a truck acc. Shop and it was the exact item for triple the price no kidding triple iam very pleased with the light and fits and works great . Thank you and I will shop with you again. Randy.
Randy S.
8/18/2015
AWESOME
Item exactly as ordered, received promptly, sealed for boat trailer, almost identical to original equipment, pre-wired and easily installed. Local retailers unable to provide same length of unit at competitive cost.
Also ordered and received a PVC grommet for my 6 1/2" oval 3 way stop-turn and running light.
Nice and bright. Was a perfect replacement for the rear of my flat bed car hauler.
John
6/13/2016
Still works nice and bright. No complaints.
Replaced the original light bar with this one and was able to reuse the existing wire harness rather than splice in the one that came with the replacement. Only had to drill two holes (into aluminum - no big deal) since the old holes didn't match up.
Excellent product. Quick delivery. Will finish wiring the boat trailer this weekend with the harness and light kit from etrailer along with the rear light bar I just received. Highly recommend etrailer!
I have order twice from e-trailer. Each time it was a great experience. The best thing was that they kept me in the loop on delivery. One item needed to be ordered from the manufacturer of the part. E-trailer notified me immediately of the situation and set proper expectations on delivery. It still came a few days earlier than what I was told. Great job!
Good quality light, I especially like the fact that each lenses is replaceable. Just wish the ground pigtail was a little bit longer.
Exactly like the original. Good quality. Shipped and received quickly. Easy installation.
Great service. Highly recommend etrailer.
I spent slightly more money on four items than I would have spent on just one part elsewhere.
Nice looking light , size was just right for the spacing on my top trim of my cargo trailer
As always, the correct part is in stock at the right price. I have bought parts from eTrailer for years and they just keep getting better. Thank!!!
Marker light ordered, fast shipping, shipped intact, GREAT price, Installed, LOOKS Great. How does it get any better. Bought from E-Trailer before, will buy again.
Thanks Gang!
Very pleased with this light bar, blends well with my factory tail lights!!
Received the item fast and in perfect condition. It was an exact replacement for the part that was damaged on my trailer and therefore fit perfectly with minimal installation effort.
etrailer has great prices and delivery on its merchandise. Thanks for the excellent service and I will
recommend etrailer to people I know.
I was pleasantly surprised as to how quickly our item shipped. We placed an order and within 4 days we had the trailer lights. Wow! I would definitely order from e trailer again. Excellent service.
Arrived quickly and is a quality product- Iam a repeat SATISFIED customer - you are my go to for trailer parts
Parts were exactly as ordered at a fair price and no hassles. Thanks Etrailer for making it easy !!!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
J D.
3/23/2015
Thanks for asking it says alot. Customers service is a hard thing to find thanks again lights are still good