Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
(177 reviews)
Price: $4.08
In Stock
Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
Item # DC-RP
Retail:$4.34
Our Price: $4.08
You Save: 6%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (177)
- Q & A (0)
- Videos (2)
- Photos
TruRyde Accessories and Parts - DC-RP
- Trailer Bearings Races Seals Caps
- Plugs
- TruRyde
- Rubber lube plug for 1.18" dust cap hole
- Quantity: 1
DC-RP Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
Video of Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of TruRyde Trailer Bearings Races Seals Caps - Rubber Lube Plug - DC-RP
Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this rubber lube plug for the E-Z Lube and etrailer Easy Grease Caps. Now this rubber plug is used in the grease cap that are designed to be used on the E-Z Lube or the etrailer Easy Grease Axles. Basically, this plug will fit into the opening on that grease cap and it prevents any dirt or moisture from entering the hubs of your E-Z Lube Axle. It'll also make it easily removable since it's rubber. Allows you to gain access to that grease Zerk fitting that's on the spindle of the axle.
And this rubber plug is designed to fit into a whole size on the caps that is 1.18 inches in diameter. Just to demonstrate, I happened to pull one of those grease caps, you can see that, it has the opening on it. So this'll go on the end of your hub and the opening allows you to access that Zerk fitting to put your grease in. So once you do that, pump your grease in there, remove your grease gun and then take your plug and just pop it right back in there, just like that, and you're all ready to go. It seals it, keeps out any dirt or moisture.
And then when you're ready to grease your bearings again instead of having to take the whole hub off, all you have to do is pop out this rubber plug. Very easy to pull right out and that gains access, hook your grease gun up, you're ready to go. But that should do it for the review on this rubber lube plug for the E-Z Lube and etrailer Easy Grease caps.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Product did not meet expectations
- Did not fit
- Wrong item was ordered
Customer Reviews
Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1 - DC-RP
Average Customer Rating: 4.8 out of 5 stars (177 Customer Reviews)
by: Paul02/12/2024
Perfect replacement part for missing OEM rubber plug on my Rockwood Mini Lite travel trailer.
by: Michael05/30/2019
I ordered these to replace old caps on a 2006 trailstar boat trailer they fit perfect
by: David 03/06/2024
Part was exactly what we needed! A+
by: Christian05/05/2023
Products are great and service was excellent. The packaging for the hubs was too light. By the time they got to me some of the boxes had holes and a couple parts were missing.. Etrailer very promptly sent me replacement parts.
by: Oscar 04/07/2023
Perfect fit, easy to install. Good to have etrailer around to get such parts
by: Rich08/25/2023
Fit Perfectly!
by: Bobby J.09/16/2016
I looked around at different outlets trying to locate these grease covers and had no luck. I googled and found eTrailer and there they were! The order was shipped immediately as promised and arrived on the date stated. The product fit and quality is excellent. Great service and fast!
by: Ronnie07/28/2018
product info, easy to slip off and grease bearings.used on two boat trailers to reduce amount of water entering hub
Ronnie
7/29/2019
holding up great
by: Dean B12/11/2015
Bought these caps as spares,low price and cheap insurance. They do wear out over time as the covers have a sharp lip. Ez lube spindles are handier than hip pockets.
Dean B.
12/10/2016
Spares are still in the box.the couple of bucks are long forgotten,but the assurance I have immediate replacements has not.great product.
by: Jeffrey11/05/2021
Perfect fit. The description helped me pick the right part/size.
by: D Richard07/07/2023
Great service. Excellent quality.
by: James H.10/08/2013
Product appears well designed and made. It fit my wheel hubs perfectly on my trailer. Exactly what I was looking for.
Only issue I had with the ordering experience was the lack of tracking data available after the item was shipped. There was never any delivery date given or means to track the shipment progress. Other than that, the items were received in 1 week in good condition.
I will definitely order from etrailer again.
by: Willie08/18/2018
This part was exactly what I needed. I had gone to three different parts houses where I live and no one could help me...they wanted to sell me completely different bearing buddy sets. I found etrailer online and had it in less than a week! Whenever I need parts for my trailer this is where I will shop!
by: Kmart11/02/2015
Looked all over for these things. No RV places carried them and were not willing to help me find them either. Finally decided to look online and etrailer popped them up immediately. Received them very quickly and have them installed in time for our trip. Thank you E trailer
by: Chris 01/26/2020
I live in the desert and rubber products dry out fast so having a few spares is always a good idea.
Chris
1/27/2021
Still works as expected
by: Big Jim10/20/2017
This rubber cap seals the grease zerk on each wheel bearing of my RV. It keeps water and dirt from contamination of the wheel bearings.
They are economically priced and were quickly delivered!
by: Travis D08/19/2011
Like others I could not find this product locally, so I went to the internet. Although it was a very inexpensive material, etrailer.com allowed the order to be placed for less than $5 AWESOME!! Other companies would not process the small value order.
Easy finding the odd ball part at etrailer as well
Easy tranasction!
Good communication back of order confirmation
Good communication back of order shipped
Good communication of the order had been delivered
And the product was of great quality and fit perfect.
Got the order in 2 days after it shipped.
I will use etrailer.com for my next parts order.
Thank You
Travis
by: Walt A12/10/2016
Originals dry rotted after a while like most rubber products over time. Replacements were exactly what I needed and extremely inexpensive. Fit perfect and worked like a charm on my BigTex 14GP gooseneck trailer.
by: Mike 05/18/2021
Thanks again etrailer. I really needed those rubber inserts, just in time too. Really appreciate your Co. Every time I turn around those rubber trailer hub inserts are shot. Got the good ones from etrailer now oh yea. Thanks again Mike in Florida.
by: Russell C03/11/2020
This is a great product. This part keeps the water out of your wheel bearings great product will always buy my trailer parts from etrailer.
by: Bernie06/13/2019
It's good to have etrailer.com selling these types of replacement items because my local trailer stores don't carry them. The difficulty with this part is finding it without knowing the part number. I had to call in to the help desk and describe it in order for them to locate it and order it.
by: Seth T03/20/2014
These work just as well as the Dexter caps and for a whole lot less! etrailer.com had my package at in my mailbox within two days.
by: Dan - MN05/16/2011
Worked great, could not find them locally and found them here. Always afraid to order from a site I did not know but received order confirmation very quickly along with a name and number to call with questions!
Very nice, wish some of my more complicated purchases offered service like that.
Anyway, they arrived very quickly and they worked. Not much you can say about a rubber plug.
by: Anthony M05/03/2020
The rubber caps worked out great. Correct size and fit.
by: Mike07/12/2017
We rely heavily on our trailer to get us to and from quality boating sites etrailer has been extremely helpful keeping us supplied with parts delivered to your door ver nice!
25
177
Show More Reviews
See what our Experts say about this TruRyde Accessories and Parts
- Recommended Rubber Lube Plug with Roughly 1 DiameterIt sounds like you're probably looking for the Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1 # DC-RP, which is just slightly bigger than 1"; you'll want to measure your opening with a digital calipers like the # PTW80157 to confirm this would work. If you find a different measurement let me know and I'm happy to see what else might work for you. I've also linked all of the available rubber bearing caps that you can have a look at, as well.
view full answer... - Replacement Rubber Lube Plug For 2.44 E-Z Lube Grease CapWe have the 1.18" Rubber Lube Plug # DC-RP that fits the 2.44" Grease Cap # RG04-080.
view full answer... - Replacement Trailer Brake Assembly and Hub/Drum for 2019 Forest River Cedar Creek 37TRH 5TH WheelThe Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-465 is the replacement for your passenger side brake assembly. This matches what was put on by Dexter. The Dexter Trailer Hub and Drum Assembly # 8-219-13UC3 matches what was originally put on your 2019 Forest River Cedar Creek 37TRH, with one exception. You axle has the E-Z cap that you can either transfer to the new hub assembly.
view full answer... - Does the Rubber Cap on a Dust Cover Have to be Removed to Fill EZ Lube Trailer Axles with GreaseYou will need direct access to the zerk fitting to fill the hub with grease. If there is a rubber cap in the way like # DC-RP, then you will have to take it off, fill the grease, and then replace the cap. I have included a link to our FAQ article on grease for you.
view full answer... - Dimensions of Replacement Rubber Grease or Oil Cap PlugThe Rubber Lube Plug - Fits 1.18" Lubed Dust Cap # DC-RP is the replacement for the # RG04-040 grease cap as well as larger caps like the 2.44" OD Drive In Grease Cap with Plug # RG04-080. The Grease Cap Plug fro E-Z Lube Grease Caps is the same size and is part # RG04-010. We have the Dexter Oil Cap plug with is much smaller at 0.55 inch diameter and the other Dexter oil cap plug that is bigger # 46-32 which is 0.88 inch diameter. The Replacement Center Plug for Kodiak XLProLube Oil...
view full answer... - Replacement Rubber Plugs for Grease Caps on Marine TrailerWe offer rubber grease cap plugs like # DC-RP which fits a 1.18-inch dust cap hole; this is sold as a single piece. We also offer a set of two in the same size as part # RG04-010. These fit grease caps like # RG04-040.
view full answer... - Comparing 21-43-1 and rg04-120 Grease CapsThe # TRU46FR and the # rg04-120 are both drive-in style grease caps with a 2.72" outer diameter. However, the # rg04-120 comes with 2 grease caps and also includes the plugs. The # 21-43-1 is a single grease cap and the rubber plug # DC-RP is not included.
view full answer... - Dust Cap Replacement for a 2017 Forest River Grey Wolf 26DBHYes, we do have a dust cap for your 2017 Forest River Grey Wolf 26DBH. It is the Rubber Lube Plug item # DC-RP. If you need the entire dust cap you will want the 2" lubed dust cap and rubber plug item # DC200L-DCRP.
view full answer... - What Size Grease Cap Hole Does Grease Cap Plug for E-Z Lube Grease Caps, # RG04-010 FitThe Grease Cap Plug for E-Z Lube Grease Caps, # RG04-010, is designed to fit Dexter E-Z Lube grease caps on the Dexter E-Z Lube axles like # RG04-040, and will otherwise fit a 1-1/4 inch opening on a grease cap. The Rubber Lube Plug - Fits 1.18 Inch Lubed Dust Cap - Qty 1, # DC-RP, fits a 1.18 inch dust cap hole and may be closer to what you need. To get the most accurate measurement of the hole in your grease cap, I recommend using dial calipers. With the most accurate measurement I...
view full answer... - How to Determine if the Grease Cap for a HubIf you are looking for a grease cap PLUG with the TRP stamped on it chances are the Grease Cap Plug for E-Z Lube Grease Caps # RG04-010 would work for you, but to be certain you will want to measure the diameter of the grease cap hole. If it is 1.18 inches across then the # RG04-010 would work for you. If you only needed one cap you would want the # DC-RP. If you are looking for the whole cap you would need to check out the picture I attached that shows where exactly to measure to determine...
view full answer...
- Recommendation For Bearing/Races/Seals Replacement Kit For 7,000-lb Lippert EZ-Lube AxlesI contacted Lippert to confirm bearing sizes and it sounds like your 7,000-lbs axles have an outer bearing like Item # 14125A and an inner bearing like Item # 25580 and a 10-36 seal. Based on this information, I recommend the replacement Bearing Kit, Item # BK3-200, which includes bearings, races, grease seals, and cotter pin. For hub grease caps, I recommend Item # rg04-120. The dust caps are sold separately so if you need them I recommend the Rubber Lube Plug, Item # DC-RP. If these...
view full answer... - EZ-Lube Grease Cap For 5K Dexter Torsion AxleThat stinks that the wheel studs broke but we do have exactly what you need to replace the grease cap on your 5k EZ-Lube Dexter torsion axle. The cap and rubber plug come separately, so what you need is the following: - EZ Lube Grease Cap # 21-42-1 - Rubber Lube Plug # DC-RP
view full answer... - Replacement Grease Cap Plugs, Bearings and Brakes for 2005 Big Tex 14GN TrailerFor a replacement rubber plug for your trailer grease caps you can use part # DC-RP from TruRyde. This fits a 1.18-inch hole in a grease cap like # RG04-040. We do offer replacement bearings, bearing kits and brake components as well. Complete bearing kits for 7K axles can be seen on the link provided. Both use inner bearing 25580 and outer bearing 14125A. Kit # BK3-210 includes a seal with an I.D. of 2.125-inches and kit # BK3-200 uses a seal with an I.D. of 2.250-inches. Individual bearings...
view full answer... - Rubber Lube Plug Recommendation for Fitting Grease Cap with 1.16 inch OpeningYes, the lube plug part # DC-RP would be a close enough fit to the size hole you mentioned that it would fit and work well. It being just a tiny bit bigger than what you have would not be an issue at all.
view full answer... - Is Rubber Plug Included with Trailer Hub Grease Cap Part # 21-43-1The rubber plug is not included. For the # 21-43-1 grease cap, you would need the rubber plug part # DC-RP. The plugs are sold individually.
view full answer... - How To Determine the Make of an Axle on a 2006 Keystone Zeppelin IIOn the frame of your trailer, near the coupler, there should be a plate that has axle information such as brand and capacity. There also should be information on the axle itself somewhere. Between checking those two places you should be able to track down the brand of your axles. There is a chance the Rubber Lube Plug # DC-RP could work for you. This is designed for dust cap holes that are 1.18 inches in diameter, which is pretty close to the 1.25 you measured on yours. This cap also has...
view full answer... - Replacement Bras For Bearing Buddy Bearing ProtectorsThe grease cap plugs we offer like part # DC-RP are designed for a specific size which fits a 1.18 inch opening. This is designed for the E-Z Lube grease caps. I have attached a link to our product page that has the available replacement bras for the Bearing Buddy you can check out. These may work for you but there is no guarantee. For example, if you have part # BB1781, # BB1781SS, or # BB1810, the replacement bra you need is part # BB17B.
view full answer... - How To Determine Correct Hub Assembly For a 17-Foot Boat TrailerThe easiest way to determine what hub assembly you will need is to get the part numbers of the inner and outer bearings and the grease seal part number from the hub assembly that is on the trailer now. If you do not have the old bearings, you will need to measure the spindle on your trailer to determine the size bearings that you will need, and what hub assembly will work. Trailer hub assemblies are not a universal fit. If you can let me know the part numbers of your bearings and grease...
view full answer...
- Grease Cap Plug for Trailer Hub Dust CoverIt's hard to see the diameter of your cap in the picture you submitted but it appears you need the part # DC-RP which fits a 1.18 inch diameter hole like it looks like you have.
view full answer...
- Difference Between the Rubber Lube Plugs # DC-RP and # RG04-010 The # RG04-010 includes a quantity of two caps, whereas the # DC-RP only includes one. It's the same cap though for either part number.
view full answer... - Recommendation for Grease Cap Plugs for a Q5 Tahoe Boat TrailerWe do have a set of grease caps that are 1-1/4 inch. Check out the Grease Cap Plug for E-Z Lube Grease Caps, # RG04-010. These caps will fit much more snug than the 1.18 inch ones you currently have.
view full answer... - How to Replace Rubber Lube Plug on Dust CapRemoving and installing a plug like the Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1 # DC-RP is a very simple process. All you have to do is pull out the old plug using something like a screwdriver and push the new plug into place. There is a lip on the plug that allows it to fit inside the metal ring and form a seal. I have attached a review video that shows this process for your reference.
view full answer... - Replacement Rubber Plug for Dexter EZ Lube Grease Cap with 1-3/16 Diameter HoleYes, the the pair of grease cap plugs # RG04-010 is the correct replacement for your EZ-Lube Dexter axle. From what I was able to find, the 1-3/16 or 1.18 inch is the standard size hole used for the rubber plugs on all EZ-Lube grease caps. It's also available individually as part # DC-RP.
view full answer... - Replacement Grease Cap for Kodiak Disc Brake Kit on 8K Dexter AxleIf you're looking for the grease cap that fits the Kodiak Disc Brake Kit # K2HR712D then part # K7CAP is what you need which fits a 2-72" hub bore. For the replacement center rubber plug you'd need part # DC-RP instead. Let me know if you were talking about something else or if you have a different hub bore size and I can help you find the correct fit for your application.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Randy B
Installed by:
Ryan G
Video Edited:
Joshua S
Video Edited:
Dustin K
Video by:
Zach D
Updated by:
Jenny M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bobby L.
9/16/2017
After a year on the road Im still fully satisfied with both the product and service from etrailer!