Recommended Brake Assemblies And Hub Assemblies For Lippert 7,000 lb Axle
Question:
I want to make sure I am getting the right brakes and hubs to replace the ones on my tandem Lippert axles. Please send an email and I will provide detailed info on what I have and what I think I need. Thanks
asked by: Jamey M
Expert Reply:
Thanks for the picture. For your 7,000 lb Lippert axle, I recommend the Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs, # AKEBRK-7R-SA, and for the left side the matching # AKEBRK-7L-SA. These brakes need to be adjusted when installed originally and then the self-adjusting system will take over and ensure you have proper braking within the assembly.
For your hubs, I recommend the Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2, # AKHD-865-7-2-K. This will give you the inner bearing and race, the outer bearing and race, the grease seal, grease cap, and nuts for the 1/2 inch studs included. This is compatible with Lippert axles.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Troubleshooting Electric Trailer Brakes That Hum But Do Not Engage Drums
- Shop: etrailer Rust-Resistant Electric Trailer Brakes - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Q&A: How To Find Correct Replacement Hub for Trailer with 8 on 6-1/2" Bolt Pattern
- Article: Trailer Wiring Diagrams
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-7-D Review
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Does It Matter Which Wire is Power and Which is Ground When Wiring Electric Brakes
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Q&A: Wheel Bearing Grease Recommendation for 7k Lippert Axle
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84546UC3 Review
- Video: etrailer Hub And Drum Assembly Installation
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-545-35-G-EZ-K
- Q&A: Grease Seal for 2020 Forest River Cedar Creek 5th Wheel With Dexter D60 Axle
- Video: Review of Dexter Axle Trailer Brake Parts - Replacement Shoe and Lining Kit - DX28FR
- Q&A: Replacement Brake Assembly Recommendation for 363233.1 and 363233.2
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-EZ-K
- Video: etrailer Electric Trailer Left Hand Brake Assembly Installation