Replacement Hub/Drum and Brake Assemblies for 92865A
Question:
I have a 16’ dump trailer with 92865 on the hub, I need to either rebuild with new brakes and hub assembly or replace axles with new. What is the correct part numbers if rebuilding or would it be cheaper to replace axles? Both axles are 8 lug brake axles.
asked by: Brad C
Expert Reply:
According to my research, your 92865A-1 hub/drum has a 25580 inner and an 14125A outer bearing and a 8 on 6-1/2 inch lug pattern, as does the etrailer # AKHD-865-7-2-K hub drum. Then for a brake assembly set you'd want the # 23-180-181 and you'd be set.
The hub kit comes with new bearings and seals as well as dust covers. This route is going to cost much less and be way easier than replacing the entire axle.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Search Results: 92865 trailer hub
- Shop: Timken Replacement Trailer Wheel Bearing - 25580
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Grease Seals 10-36 (pair)
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972
- Search Results: cotter pins
- Search Results: 7~262
- Search Results: timken bearing kit
- Search Results: hub studs
- Search Results: timken 25580
- Search Results: cotter pin
- Video: Review of Dexter Axle Trailer Brakes - Electric Drum Brake Kit - 23-180-181
- Q&A: Replacement Wheel Stud for Trailer Hub # AKHD-865-8-K
- Q&A: Replacement Hub and Drum Assembly for 7K Axles on a Triple Crown Dump Trailer
- Q&A: Availability of Replacement for Trailer Hub/Brake Drum 92865A-1
- Article: Best Vehicles to Flat Tow Behind an RV
- Shop: Trailer Hitch
- Shop: Vehicle Tow Bar Wiring
- Shop: Base Plate for Tow Bar
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-110 Review
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?