Large Spindle and 8 Lug Hub Assembly For Crane Build
Question:
I need 1 8 to 10 lug hub assembly and spindle. Im building a crane and this is my center pin. The strongest that you sell.
asked by: John S
Expert Reply:
Our strongest regular spindle is the #42 Spindle, # TRU57FR. This spindle is for a 7000 lb axle and the idler hub assembly is # AKIHUB-865-7-1-K.
If you wanted a drum assembly with brakes, you would want the # AKHD-865-7-2-K hub and drum assembly with the # AKEBRK-7L-SA brake assembly.
We carry heavier drum and brake assemblies, but this is the largest spindle we carry.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Drag Roller Recommendation for Boat Trailer with Prop Protector Cut Out
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Q&A: Availability Of 12" Replacement Brakes For Kelsey Hayes 4-Bolt Pattern With 3-1/2" Center Hole
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Q&A: Should There Be Any Play After Installing An Easy Grease Trailer Hub and Drum Assembly
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Spindle for 7,000 lbs Axle
- Article: Trailer Maintenance Schedule
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Overview of Lubricating Grease
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision