Replacement Studs for RVD-H-865 7k Hub/Drum
Question:
I have a tru ryde rvd-h-865 7k hub. I’m looking to replace a couple replacement studs The lug nuts take a 7/8 socket
asked by: GrAham
Expert Reply:
A TruRyde rvd-h-865 7k hub/drum like # AKHD-865-7-2-K uses 1/2-inch drive-in studs that are 1-5/16-inches long. For a replacement stud you can use # 165981. This is slightly longer at 1-1/2-inches but it has the same 1/2-inch diameter. They are also available in a 4 pack item # RG03-020.
Products Referenced in This Question
Replacement Trailer Hub Wheel Stud - Drive-In - 1/2" x 1-1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-1/2 Inch Long
- Redline
more information >
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-1/2" (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-1/2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Trailer Hub Wheel Stud, Drive-In, 9/16" x 2-1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 9/16 Inch Diameter
- Drive-In Stud
- 2-1/2 Inch Long
- Redline
more information >
Continue Researching
- Search Results: 5/8 roller shaft
- Shop: Replacement Trailer Hub Wheel Stud - Drive-In - 1/2" x 1-1/2" - Qty 1
- Shop: Replacement Drums for M-3 Dual Ramp Springs - Left and Right Hand
- Shop: 7-Pole Rubber Socket Boot
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 8-7/8" x 5/8"
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Search Results: side markers
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Search Results: trailer leaf springs
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Shop: Trailer Hitch
- Search Results: 50~85~315
- Search Results: rg03~080
- Q&A: Stock Trailer Spare Tire Carrier Recommendation for Horse Trailer
- Search Results: stake pocket
- Search Results: self grounding marker lights
- Q&A: What are the Dimensions of Replacement Trailer Hub Wheel Studs # RG03-080
- Shop: Gooseneck Hitch
- Q&A: etrailer Hub and Drum Assemblies For 7,000LB Axle With 1/2" Wheel Studs
- Shop: Brake Controller
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-6 Review
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Video: Review of ShockStrap Ratchet Straps - Trailer - Truck Bed - SS63MV
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Q&A: Trailer Wheel and Tire Spare for 2019 Load Rite Trailer Seahunt 225 Ultra
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-865-7-2-K
- Video: Dexter Axle Trailer Brakes - Disc Brakes - K71-694-695-14 Review