Is Dexter 12-1/4 x 5 Brake Assembly # 23-446 Compatible with Dexter Hub/Drum Assembly # 8-285-11UC3
Question:
Dear Sir, we purchased 1. Electric Brake Assembly part # 23-446 and 2. Dexter Trailer Hubs and Drums -part # 8-285-11UC3 from etrailer. can you advice that these two part numbers listed above can be used together in the axle assembly for trailer application. Thanks and Regards.
asked by: Mazhar H
Helpful Expert Reply:
I did not find any purchase history for you but the electric drum brake that you referenced, Dexter # 23-446, is a left-hand 12-1/4 x 5-inch-wide brake. Its matching right-hand part is # 23-447. The hub/drum you referenced, Dexter part # 8-285-11UC3, is a 12-1/4 diameter x 3-3/8-inch-wide hub. These parts do not work together. The brake is rated for 15,000-lb axles while the hub/drum is rated for 8000-lb axles. Both their sizes and weight ratings are incompatible with each other.
You will want to confirm the weight rating of the axle you have and verify the bearings required for its spindle. Replacement hubs must have the correct weight rating and use the same bearings as your originals in order for them to fit your spindles. The Dexter hub you referenced uses inner bearing # 25580 and outer bearing # 02475.
The linked photo will show you the typical location and appearance of bearing part numbers; this will help you find suitable hubs that use the same bearings. A link is provided to let you search our hub assemblies by selecting your axle capacity and bearings.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Dexter Electric Brake Assembly w/ Cast Backing - Self-Adjusting - 12-1/4" - Right Hand - 15K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 15000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 5 Inch Drum
- Dexter
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 02475
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Electric Brake Assembly w/ Cast Backing - Self-Adjusting - 12-1/4" - Left Hand - 15K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 15000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 5 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Right Hand Side Equalizer to Match Left Hand Side # 13-82-1
- Q&A: Hangers, Bolts, and U-bolts For 3 Inch Axle and Jeep Leaf Springs
- Q&A: What is the Capacity of a Dexter P-12 Model D100 Axle
- Q&A: What are the Red and Black Wires For on a 7-Way Trailer Connector
- Q&A: Troubleshooting Weak Braking After Installing New Dexter Electric Brakes on Trailer
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Proper Orientation of Trailer Electric Brake Assemblies
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision