etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
(1209 reviews)
Price: $214.94
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98844
Retail:$445.00
Our Price: $214.94
You Save: $230.06
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1209)
- Q & A (0)
- Photos
etrailer Trailer Hitch - e98844
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- etrailer
- 900 lbs TW
- 8000 lbs WD GTW
- 900 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 8,000 lbs
- Maximum tongue weight: 900 lbs
- Maximum TW when used with weight distribution: 900 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98844 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2019 Toyota Highlander
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98844
Average Customer Rating: 4.9 out of 5 stars (1209 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Sha ron P02/18/2023
I am very pleased with my purchase.The etrailer hitch is a perfect fit for my 2015 Toyota Highlander. This company went above and beyond to assist me with finding a location to install it.
by: T.D.04/02/2023
Arrived quickly and undamaged. A really solid purchase. Installed (professionally) easily on my vehicle and has a nice look. Blends into the vehicle and looks like it could have been an original install at the time of manufacture. Matte finish is a really good look. Used for 4-bike bike rack and has been a great performer. Secure and easily holds the load. Very happy with this purchase and glad we went with this brand and style. Would definitely purchase again and will certainly look at this hitch should we need to install on a different vehicle in the future.
T.d.
4/7/2024
A year later I am still very satisfied with this purchase. Continues to be a solid product and have had absolutely no issues with this purchase or install. Definitely a good purchase and would highly recommend to others who are in need of a hitch that will allow you to transport multiple bikes long distances. Still looks new after a year installed on my vehicle.
by: Scott04/06/2024
Dear Etrailer.com
Taking a moment to write a review of my experience with your company. It is shocking to actually have a totally positive experience dealing with a company! Your customer service is exemplary , starting with George J that took my initial call, to Jaime B that took my order , to Quinn that gave me some crucial insights into how to overcome an obstacle installing my hitch receiver. Customer service is a lost art , if other companies and particularly monopoly mega corporations would adopt even a portion of your business ethos and acumen , everyone’s life would be a lot less frustrating! Can’t thank you enough!
by: Joseph07/09/2023
Couldn't be happier with my purchase. I had it installed at U-haul and have been towing a Kuat 3 bike rack assembly. Was initially wary that the receiver would throw off the weight balance on my car, especially when driving through snowy conditions and on snow (I live in the Pacific North West and drive through a mountain pass to get to my local ski resort every weekend), but that hasn't been an issue so far.
by: Harold 02/16/2023
2019 Toyota Highlander
I just got receiver hitch installed on wife's 2019 Highlander. Went pretty good. I opted not to drop spare tire to install it. The installation video on the website was great help also. I did it on floor with assistance from a jack and my wife. On a scale of 1 to 10 on difficultly i would say maybe a 3. I have not used it yet but seems to be make very sturdy. I do like the way it kind of hides and dont stick out.
Harold
2/17/2024
Been very pleased with the Trailer Hitch Receiver. I only use it when we go to the beach for a cargo carrier, Thats why i wanted one that fit tight up against the car. Blends in and looks factory.
by: David 04/22/2024
2017 Toyota Highlander
The trailer hitch was easy to install on my 2017 Highlander with accurate instructions. It required a slight modification to the plastic undercarriage cover which was easily completed. I’ve used it a few times and it has worked well.
by: Chris04/30/2022
2019 Toyota Highlander
Very simple to install. I did in my driveway without dropping spare. Had a little help holding up side while installing bolts on other rail. Only tough bolt to put in was one right above muffler. Very happy with the way it fits and looks. Highly recommend
Chris
5/1/2023
A year in use and no complaints or worries. Functioning very well. Very good product
by: Steve 01/04/2023
Hitch fit perfect. Took about 20 minutes to bolt hitch to frame. About 45 minutes to remove and trim plastic cover. If you’re working alone recommend using floor jack to hold in place while installing bolts
Steve
1/5/2024
Works great. Have hauled bike carrier almost 4000 miles since installation. This hitch was over $1000 less than Toyota wanted to install an OEM
Mike L.
1/5/2024
@Steve It's always fun to pull one over on the stealership, isn't it?
by: Joshua06/11/2022
Toyota Highlander
The website gave me the perfect fit for our Highlander. Shipping was fast and arrived on time. Installation was a breeze with the hitch and wiring harness. Great overall experience. FYI…I installed this entire system by myself in under an hour.
Joshua
6/12/2023
Works perfect. I was able to install by myself!
Mike L.
9/6/2023
@Joshua Niiice! Glad to hear that the etrailer brand # e98844 Class III hitch is working well for you.
by: Phil 04/30/2024
Well u wood get 5 but again the box was smashed looked like it was dropped & dragged this is 2nd hitch that came this way I'll have 2 touch up paint,it installed nice & videos on how 2 were good.
by: Kyle 03/08/2024
Product is very well made. It fit exactly as describe.
I really liked the the extremely helpful installation video.
It saved me for having to look up YouTube videos.
We are primarily using it for a bike holder but plan to get a small trailer as well since we lost our truck to old age.
by: Mark 02/17/2024
2016 Toyota Highlander
Instructions were easy to follow.(watched online video) I backed my 2016 Highlander XLE up on ramps for easy access to install. I used a BOSCH oscillating multi-tool to cut the plastic undercarriage guards - worked great and fit perfectly around the new hitch once it was reinstalled.
BOSCH 18V impact driver with a 9” or 12” 3/8 wobble extension made quick work of the bolts around the exhaust. Very easy 45 min start to finish job if you have a few tools.
by: Maggie 03/24/2023
Looks fantastic. Plenty of strength. Great price.
Gregory
3/25/2024
Its been over a year since I installed this hitch receiver onto our 2015 Toyota Highlander. We drove across the country, from Florida to California and were very pleased with the towing capacity of our hitch. The only thing I would change is the square bar that you attach the chain to. A round bar would work better for us. Otherwise, its perfect.
by: Dane02/13/2023
Toyota Highlander
New hitch looks great and was easy to install. Instructions were easy to follow. I backed my Highlander up on ramps for easy access to install. I used a DeWalt oscillating multi-tool to cut the plastic undercarriage guards - worked great and fit perfectly around the new hitch once it was reinstalled.
by: Vernon 01/02/2024
I have used this trailer hitch for a year now. Great product and company. I took it to a friend to install. Afterward he chuckled saying that it took him about 10 minutes and that I could have easily done it.
by: Steve 04/14/2024
The hitch is doing its job I have had no problems.i feel it was well worth the amount and I will order again thank you
by: John02/16/2024
Trailer hitch was a perfect fit for my vehicle and the instructions on installation were concise and easy to follow. Very happy with the product.
by: Danny 12/29/2022
Fit as it said it would. Video was on the spot. For someone like me and no garage, laid on my back in driveway and successfully put it on.
Price I couldn’t find any better. Shipping to my house was awesome.
If I had to buy another for other vehicles Etrailer is my first stop!!
Danny
12/30/2023
Great Use it for aluminum wheel chair carrier
by: Michael05/06/2023
2015 Toyota Highlander
Perfect fit. Easy to install. Only challenge was finding the bolts and instructions. Lol. Didn’t know that they were hiding inside taped hitch.
by: Christopher03/07/2023
This was a great purchase. Easy to install, the video was super helpful and the instruction manual made it very applicable for my friend and I. I excited to have this hitch and use it for years to come.
by: Joe01/19/2024
Rep was friendly and helpful in making sure I got the right hitch. Quick delivery. Hitch mounted quickly/easily. Kit contained all bolts, etc necessary for installation. Good price, too.
by: Barry06/10/2022
Highest rated capacity for weight. Good instructions, easy installation and looks good. Receiver may be a little low for towing and the OEM looks like it would mount higher but at twice the cost and would need new rear fascia so I opted for this model and a kick up hitch ball assembly to correct the elevation difference.
Barry
6/12/2023
The hitch still works great and adds to the versatility of my vehicle immensely. 10 out of 10. Highly recommend.
Mike L.
9/6/2023
@Barry That's awesome! Glad to hear the hitch is working well for you!
by: Robert 09/25/2023
2017 Toyota Highlander
This is the second trailer hitch I have purchased from eTrailer and this one is just as good as the last. Installation was relatively easy, the video and written instructions were very clear and easy to follow. I will only be using it to cary a bike rack but the next owner of this vehicle may appreciate the already installed hitch.
by: Chris R08/01/2020
This hitch is bombproof. After one year it is still super solid. It is low profile and looks great. I’ve pulled several things with it but mostly use it for my bike rack and cargo tray. It was a lot of work to install but the instructions were detailed and accurate for my vehicle. I would definitely buy it again.
Chris R.
8/3/2021
Still works great. Still solid. Would definitely buy again.
by: Hector12/25/2018
2017 Toyota Highlander
The trailer hitch arrived a day earlier than expected.The box was damaged but the hitch did not have a scratch.The instructions were very clear and to the point. The rear tow hitch on the right rear was replaced on the left rear side due to the welded tab on the trailer hitch.The cutting of the undercarriage plastic was simple. Highly recommended the product. Hector....
Hector
12/26/2019
Not a single issue, works great.
25
1209
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Recommendation Trailer Hitch 2019 Toyota Highlander W/ Full 20 Size SpareWe have 4 hitches for your 2019 Toyota Highlander. The EcoHitch # 306-X7250 says Hitch does not fit vehicles with full size spare tire stowed under vehicle. The other three, the etrailer # e98844, the Curt # C13394, and the Curt # C13200 all say that they will fit with full size spare tire stowed under vehicle unless spare is on an Aluminum rim, which is too wide. So if you have a full size spare, and it is not on the aluminum rim, then you have 3 hitches from which to choose. I have...
view full answer... - Best Way to Carry Rad Power E-Bike with 2017 Toyota HighlanderFor the heavier e-bikes like your Rad Power that weighs 60 lbs there really is only hitch mounted options for bike racks like the very easy to use Thule EasyFold XT part # TH903202. Trailer hitches attach to the frame of the vehicle which provides a very sturdy point for the rack to attach to which is needed for the much heavier e-bikes. If you were to try and carry an e-bike on a trunk rack you'd most likely dent the rear door. But hitch options give you a much easier install, stronger...
view full answer...
- Recommended Trailer Hitch for a 2019 Toyota HighlanderFor your 2019 Toyota Highlander I recommend checking out the etrailer Trailer Hitch Receiver # e98844. This hitch is pretty cost effective, has a class III 2" receiver, a 6,000 lb max weight capacity, a max tongue weight capacity of 900 lbs, and is made in the USA. Unfortunately the way your Toyota is designed no matter which hitch you use you are going to have to trim/remove the underbody panel for install.
view full answer... - Hitch for 2015 Toyota Highlander That Will Not Protrude Past BumperThe etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"# e98844 that you referenced does not stick out from the bumper it is almost exactly flush with the back of the bumper, so you would not need to be worried about accidentally banging your shins the receiver. You can see this set up at the 1:30 mark in the attached installation video.
view full answer...
- Recommended Hitch and Wiring Harness for a 2017 Toyota HighlanderTo add a hitch to your 2017 Toyota Highlander, I recommend the etrailer item # e98844. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver. This hitch has a 6,000 lbs towing capacity and a 900 lbs maximum tongue weight. To install a wiring harness on your Highlander you'll first need to know whether or not your Highlander has the factory towing package because the connectors are different. This is not something I am able...
view full answer... - Best 2-Inch Hitch For 2019 Toyota HighlanderYes, you have a few options to choose from when it comes to hitches for your 2019 Toyota Highlander but it does not need to be a complicated decision. The etrailer.com Trailer Hitch Receiver # e98844 is my recommendation for a few reasons. The matte black finish blends in perfectly with the bumber and undercarriage of the Highlander as you can see from the included example from a customer. In addition, the finish is more scratch resistant than the glossy finishes of other hitch choices....
view full answer...
- Best 4-Way Wiring Harness for 2018 Toyota HighlanderThe best wiring harness for your 2018 Toyota Highlander is the Tekonsha T-One Vehicle Wiring Harness # 118449. That is assuming you do not have the factory tow package. When it comes to wiring, we have found Tekonsha to be the most reliable. This plugs into existing wiring, providing you with a 4-way to power a trailer's signal lights. If you do have the factory tow package you need the Curt # 56042 instead. There is no option for a Tekonsha wiring harness if you have the factory tow...
view full answer... - Recommended Trailer Hitch Receiver Compatible With Full Size Spare On 2019 Toyota HighlanderFor your 2019 Toyota Highlander I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98844 which is confirmed to work with the factory full size spare tire. This is a great option for carrying a bike rack like the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches # TH934XTR, a cargo carrier, or even a ball mount for towing a trailer. If you can tell me what you plan on using your trailer hitch receiver...
view full answer... - Can 2005 Toyota Highlander Hitch Be Reused for 2018 Toyota Highlander?The Toyota Highlander has through two generation changes between your 2005 and your 2018 and some facelifts which means your old hitch is not compatible with your new vehicle. You can really see how much has changed (for the better!) when you compare a 2005 Toyota Highlander hitch like the etrailer # e98857 with the newer 2018 Toyota Highlander hitch like the Draw-Tite # DT65MR. The hitches for the older models needed to noticeably angle forward and maneuver around the exhaust. It also...
view full answer... - Hitch that Fits 2019 Toyota HighlanderThe etrailer hitch # e98844 is my recommendation for your 2019 Toyota Highlander. Because of that I think it's the obvious choice for your Highlander. It has an attractive black matte finish, a great towing capacity, and can be used with a weight distribution system.
view full answer...
- Parts Needed to Tow Trailer with 2017 Toyota HighlanderThe etrailer Hitch with 2" receiver # e98844 you mentioned is a great choice to start off, and this hitch comes with a durable powder coat that will help ensure that it stands up to dings and nicks that might otherwise lead to rust. In addition to a trailer hitch, you'll need a wiring harness, ball mount, hitch ball, hitch pin, clip and potentially a brake controller if the trailer you'll be towing has brakes. For the trailer wiring, I recommend using the Tekonsha # 118449 if you'll only...
view full answer... - Recommended Complete Towing Setup for 2017 Toyota Highlander SLE AWD for 3,850 lb TrailerI'm happy to help you get what you need for towing. I did a little research to find your 2017 Toyota Highlander SLE AWD towing capacity to be 5,000 lbs. Based on that, you will not have an issue with a 3,850 lb travel trailer with 400 lb tongue weight, but you will want the proper equipment to do so. I recommend starting with the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e98844 rated for up to 900 lbs tongue weight and towing up to 6,000...
view full answer... - Will etrailer Hitch for 2019 Toyota Highlander Fit with Black Spare WheelYes, your black spare that you have is one that is compatible with the etrailer hitch part # e98844. It's only the aluminum wheels that won't fit and what you have is not the aluminum one Nick.
view full answer... - Will etrailer Trailer Hitch e98844 Fit A 2019 Toyota Highlander Limited?It sure will! The etrailer Trailer Hitch Receiver # e98844 you were looking at is designed to fit all models of the 2019 Toyota Highlander including a Limited model like yours as you can see in the included picture of this hitch installed on a customers Toyota Highlander Limited. If you will be towing a trailer with your Highlander you will also need a vehicle wiring harness # 118449, and a ball mount, hitch ball, and hitch pin and clip which can all be found in the etrailer Ball Mount...
view full answer...
- Parts Needed to Tow Travel Trailer With 2015 Toyota HighlanderYour 2015 Toyota Highlander can tow a travel trailer with a GVWR of 3,960 lbs (GVWR is the dry weight plus the payload capacity and what should be used when determining total weight). It can do so safely, though the gas mileage is going to be affected somewhat, which is true of any vehicle when towing. The engine will perform just fine, but towing is a stressor on any vehicle so I do recommend adding a transmission cooler to help, the Derale Series 8000 Plate-Fin Transmission Cooler Kit...
view full answer... - Trailer Hitch Recommendation for 2019 Toyota Highlander Carrying Wheelchair CarrierI'll try to answer your questions without being too techy! Basically you need a trailer hitch that has enough tongue weight capacity for the weight of your carrier and chair. So you need at least 340 lbs of tongue weight. 350 lbs of tongue weight is basically the standard for Class III hitches so that would be the Class you'd need. Which the hitch Classes are just a way to organize them generally by weight capacity and size. So for a hitch that fits a 2019 Toyota Highlander Hybrid and...
view full answer... - Remove or Trim the Underbody Panel on a 2014 Toyota Highlander for a Draw-Tite Trailer HitchThe installation instruction for the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e98844, which I have linked, includes instructions on how to remove and trim the underbody panel. I have also attached an installation video for you. To complete your towing setup, you may also be interested in the etrailer.com ball mount kit part # 989900. This comes with ball mounts, ball and a pin and clip and the Tow Ready Wiring Harness part # 118449. I attached...
view full answer... - Parts Needed to Tow Trailer with 2017 Toyota HighlanderThe etrailer hitch part # e98844 that you referenced is a great option for a trailer hitch for your 2017 Toyota Highlander. Then for a trailer wiring you'd want the 7-way part # 22119 which will give you a 7-way which you'll need to activate the trailer brakes. So, the easiest to install brake controller that also works really well is the Curt Echo Mobile part # C51180. Basically, this just plugs into an active 7-way and once you sync it to your phone it's ready to go. This brake controller...
view full answer... - Will a Full Size Spare Tire Fit With The etrailer Receiver # e98844 On my 2019 Toyota Highlander?The etrailer Class 3 Trailer Hitch Receiver # e98844 will fit the full-size spare on your 2019 Toyota Highlander stowed under vehicle unless spare is on an Aluminum rim, which is too wide. This receiver is rated for 900lbs of tongue weight and 6,000lbs of maximum trailer capacity. The towing capacity can increase to 8,000lbs when used with a weight distribution system. Be sure to consult your Toyota dealer for your specific towing capacity on your Highlander and do not exceed the lower...
view full answer... - Does Threadlocker Need to be Used When Installing the etrailer Hitch on a 2019 Toyota HighlanderHey Sylvester! Trailer hitches like the etrailer # e98844 for your 2019 Toyota Highlander don't require threadlocker on the bolts but we do call for checking the torque of the hardware periodically just to make sure nothing is coming loose. I suppose there technically isn't any harm with using threadlocker for the installation, just be sure to run the bolts through the weld nuts prior to applying the threadlocker just so make sure the bolts will install properly. Sometimes there will...
view full answer... - Which Trailer Hitch for 2019 Toyota HighlanderTo choose the correct hitch for your Highlander, you'll need to know if you have a hybrid model and if your vehicle has a full sized or a compact spare tire. Then, you'd decide whether you prefer a hitch that's pretty well concealed behind the bumper (except for the receiver opening) or if having the hitch visible from the rear doesn't bother you in the least. Here's a run-down: Let's start with the etrailer branded # e98844. This hitch won't be concealed and will fit hybrid models as...
view full answer... - Are Bike Racks Available For 1/2 Inch Hitch ReceiverYou are correct that the bike racks we offer are designed to work with hitch receivers that have either 1-1/4 or 2 inch openings. I spoke with one of our other Experts who said a hitch that had a 1/2 dimension was used several years ago on some vehicles, but are no longer used. I have attached a photo of one of those hitches. The photo was provided by a customer so I do not have the dimensions for the receiver opening. We do not offer any bike racks that would fit a receiver shaped like...
view full answer... - Does etrailer Trailer Hitch Fit 2019 Toyota Highlander Hybrid LimitedIt sure does! I can verify that the etrailer hitch does indeed fit your 2019 Toyota Highlander Hybrid Limited; the correct hitch is the following: - etrailer Trailer Hitch Receiver # e98844 I wanted to mention that if you plan on doing some towing with this hitch and your '19 Highlander, and also need a 4-flat wiring harness, the correct fit is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118449.
view full answer... - Recommended Hitch with 2 Inch Receiver for 2018 Toyota HighlanderI recommend using the etrailer # e98844 which will give you the 2" receiver you're looking for, so it's ideal for carrying a bike rack or other hitch mounted accessories. This hitch is confirmed as a fit for your 2018 Toyota Highlander. I've gone ahead and linked an installation video of this hitch and our entire selection of bike racks that will fit in 2" receivers in case you don't already have one.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Updated by:
Wilson B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Written by:
Kristina F
Video by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sha P.
2/23/2024
Ive had my hitch for an year and I have not had any problems. It is very well made the color hasnt faded and theirs no rust. I will be purchasing another one for my next vehicle.