B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
(165 reviews)
Price: $329.00
In Stock
B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
Item # BWHDRH25122
Our Price: $329.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (165)
- Q & A (0)
- Photos
1989 Ford F-150, F-250, F-350 - B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- 2 Inch Hitch
- Class V
- 16000
- Visible Cross Tube
- B and W
- 1600
- 16000 lbs WD GTW
- 1600 lbs WD TW
- Custom Fit Hitch
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Features:
- Custom-fit trailer hitch lets you tow a trailer with your vehicle
- Bolt-on installation - no welding required
- Interlocking, 3-piece design
- Grade 8 mounting hardware and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- High-gloss, black powder coat finish resists corrosion
- Safety chain loops built into heavy-duty steel gusset
- Sturdy steel construction
- Electrical bracket for 7-way trailer connector included
- Ball mount, pin and clip sold separately
- Made in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Maximum TW when used with weight distribution: 1,600 lbs
- Maximum gross trailer weight: 16,000 lbs
- Lifetime limited warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
HDRH25122 B and W Heavy-Duty Class 5 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Tech Tip
Hitch is designed to allow fits for both 34 and 37-1/2 inch frames. Drilling required for installation , Hitch installation is made easier by lowering or temporarily removing the spare tire , Spare tire repositioning and/or modification of spare tire carrier may be required
California residents: click here
Complete Towing Package for 1989 Ford
Package Price:$417.16
1989 Ford F-150, F-250, F-350 Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Trailer Hitch Accessories
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Defective
Customer Reviews
B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" - BWHDRH25122
Average Customer Rating: 4.8 out of 5 stars (165 Customer Reviews)
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.by: Gary 05/24/2024
Two holes to drill, bolted right up. I did not open package for about six months after receipt. I was short two pieces of hardware. Contacted B&W, parts were in the mail that day. This is the second hitch I have ordered. No problems with either one!!
by: Daniel12/27/2023
Absolutely love the install process and the look of this hitch. I installed it on my 1989 V30 Crew Cab. Took all of 10 minutes.
My only complaint is how it arrived to my doorstep. Not sure if it’s how these things are shipped or if Shipping dropped the ball but it seems like an easy way to lose parts if you ask me. Only stating this in hopes Etrailer can make a note of it happening.
by: Brian04/09/2023
Hitch worked out great for my project, 1966 ford f250 body on a 1976 ford f250 4x4 highboy frame/chassis. Drilled all new holes to mount to frame. I had concerns because I had to shorten the frame 2 inches to accommodate the 66 long bed and factor original bumper. Thank you for the photos and dimensions of drop for the receiver tube. Hitch looks great and doesn’t hang to low.
by: Alan03/11/2023
1997 Ford F-250 and F-350 Heavy Duty
Had to trim the mounting ears about 3/16” of an inch on either side to clear bumper mounts. Seems very sturdy and well made. Looks good and doesn’t hang down too low on a 97 f250 with standard rear bumper.
by: Cal12/05/2019
GMC
I am very impressed with this product. The construction on the class 5 hitch is something to brag about! Very well constructed and made. The welds and craftsmanship looks great. The only mods I had to do, the center holes on the frame were off about a 1/4 inch, it’s was no problem to drill out with the right tools. It is well worth the time to install, took me about and hour. This is why I’m always proud to buy products made in the USA [Thumbs up] The quality of the B&W hitch is unmatched. The process and shipment was fast as well.
1983 GMC K2500
by: Mark 05/16/2024
1971 Ford F-100, F-150, F-250, F-350
Excellent heavy duty hitch. Fit perfect and was easy to install. Fast service.
by: Joe 12/08/2023
I’ve hauled lots of hay with mine no issues. Towed the cattle trailer a few times and it worked great. Highly recommend this hitch
by: Steve 09/15/2023
2016 Ford F-250 Super Duty
Excellent quality American made hitch, installation went very smoothly onto my 1973 F250 truck. I particularly liked the modular bolt together design of the hitch this made the installation go easier (since it was lighter and less awkward).
I installed inside, then put the back piece into the mounted side and then installed the second side.
The photos are not the best, but hitch tucks up nice and tight to the bumper. Since the capacity is 16,000 lbs, it will definitely handle the new 28' enclosed trailer with ease (close to 10,000 lbs loaded).
by: John04/09/2018
1984 Chevrolet C/K Series Pickup
I ordered this hitch for my 84 Chevy D30 military truck. After a few modifications to the existing mounting brackets for the tow hooks and the rear bumper I installed the new hitch assembley. Make sure you loose install all bolts first before tightening. Tighten new hitch assembly last. One of the most difficult parts is getting the Pindel hitch bolts lined up. I would suggest a good tapered line up bar.
by: Austin E.11/22/2018
1986 Chevrolet C/K Series Pickup
Great hitch, I didn’t even have to drill one hole in the frame on my 1988 GMC v3500, it bolted right in. The receiver tucked under the bumper very good
The only thing I didn’t like was the trailer wiring plug bracket because it didn’t accommodate the new style 7-way and 4-way plug that come on the new Chevy trucks
by: Steve S.05/12/2014
1968 Ford F-100
Very good quality American made item. It fit my 1968 Ford F-100 perfect. It sits right below my new Fey step bumper and I can't even see it except for the square receiver hole.
Steve S.
5/12/2015
Used it 4 times last year to pull my 25 foot Airstream using an equalizer hitch. Still works great!
by: Charles12/18/2022
Fit good on my 88 f250 install was pretty easy. Was worried about it sticking out to far where my truck has a roll pan on it but actually fits pretty good with the roll pan
by: Joe01/25/2023
Awesome product! Just had to drill the center holes on both sides through the frame and it bolted right in. The tracking is by far the best of any online purchase I’ve ever made. Great job guys keep it up
by: Marshall09/30/2020
Awesome, delivered on scheduled and installed the same day with ease! High quality materials and easy to follow instructions. The license plate cut out was from the old hitch. The B&W trailer hitch was perfect fit no cutting necessary.
by: Uwe05/20/2024
1976 GMC C/K Series Pickup
Fit good as advertised
by: Andrew06/03/2021
It is a great reciver hitch. Bolted right up to my 1985 chevy k30. I tow all the time so a good strong hitch is important.
by: Hank 10/07/2023
Instructions sucked, but I figured it out. Works perfectly, thanks
by: Nick R.10/01/2015
I couldn't find what i was looking for anywhere else and e trailer had exactly what i wwanted. I am extremely please with the customer service I received and the product. I will be using etrailer first from now on thank you etrailer.
Nick R.
by: Joshua07/04/2021
Hitch fit perfectly on my 1989 Dodge W150! Took less than an hour to install, only had to drill 2 holes to fasten it to the frame.
by: Tyler 01/02/2024
1995 Ford F-350 Super Duty
worked perfect on a 95 f350 with a stock hight bumper.
by: Gordon12/10/2023
Very sturdy and looks great. I installed it myself laying on cardboard over my gravel driveway. It ws very tight with the drilling and all but if I, a 62 year old geezer can do it, so can you!
by: Keith03/26/2022
Perfect fit on my chevy 3500 cab and chassis pickup. was missing a few washers but found some to finish install... fast shipping ordered on 3/16 received it 3/22
by: Cesar 04/07/2023
I’m 100% satisfied. Dianna A knew exactly what I needed and what I was talking about when I was explaining my needs. The B&W hitch receiver is awesome.
by: Andy04/17/2018
1985 Chevrolet C/K Series Pickup
I just got this hitch today in the mail, it's awesome! Extremely well built and sturdy and the etrailer box kept it safe no dings or dents even. On a regular Chevy truck it will fit perfectly and installation is very straightforward but I would recommend having a friend help hold it while you get two bolts started. I installed it on a 85 Chevy k30 m1008 military truck. On these trucks people have problems with the shackle mounts fitting with a hitch and this one is no different. Some modifications will be needed to the shackle mounts, or the shackle mounts can be removed.
Andy
4/18/2019
1 year later and this hitch is everything I said it was in the first review. The powder coating is still in great shape although this truck does not see Ohios lovely salted winter roads.
by: Bradd08/20/2018
1988 Ford F-250 Super Duty
This is a really nice, really heavy duty hitch. It also works with other brands of vehicles so if one wanted to could take it off before selling and reuse. (My truck is a 1988 F250) Installation was very straight forward, basically get a helper, hold hitch up to frame, mark bolt holes with pen or starter punch, and then drill consecutively larger holes till you get to 1/2 inch. Bolt up, torque, and you are off to the races. I did not remove the spare tire but wish I had. It made holding the top of the bolts very difficult. Save time and remove the spare tire as your first step.!
Heather A.
8/22/2018
This hitch part # BWHDRH25122 is a custom fit for the 1988 F250. It it still a good idea to use the fit guide and make sure it will fit the next truck. It is not a custom fit for every vehicle.
25
165
Show More Reviews
See what our Experts say about this B and W Trailer Hitch
- Front Hitch for 1986 Ford F-350The B&W Heavy-Duty Trailer Hitch # BWHDRH25122 that you referenced is confirmed to fit your 1986 Ford F-350 Dually, but it's designed to install onto the frame rails at the rear. This will not fit the front of your truck. There is not a custom-fit front hitch available for this particular model F-350. The only option we have available that might work is an adjustable universal model like the Curt # C13702, which will fit frame widths of 18 to 51 inches. This can either be bolted on with...
view full answer... - Trailer Hitch and Wiring for a 1970 Ford F-100 Styleside with Standard BumperModification and/or relocation of the spare tire mounting bracket is going to be a possibility for any of the trailer hitches for your 1970 Ford F-100 styleside with standard bumper. The spare would have to be positioned further forward on the vehicle if it has to be moved at all. The only way to know for sure is to begin the installation process. There are no specific instructions if the spare does have to move. The most popular hitch option for your truck is # BWHDRH25122. I have included...
view full answer... - Are Trailer Hitches Certified and Documented for Weight CapacityTrailer hitches and vehicles often have different ratings. The trailer hitch, # BWHDRH25122, itself is rated for 16,000 pounds gross trailer weight and 1,600 pounds tongue weight. But if the truck is rated lower, which it likely is, then you have to go by the lower rating. The truck owners manual should state what its towing capacity is. The trailer hitch meets the specifications for trailer hitches required by the Society of Automotive Engineers (SAE) and the US department of transportation....
view full answer... - Trailer Hitch for a 1998 Fleetwood Pace Arrow to Tow a 6,000 Pound TrailerYou are going to need to have a hitch welded to the frame of your 1998 Fleetwood Pace Arrow motor home by a qualified professional welder. The bolt-on hitches we have for RVs are not rated high enough for a gross trailer weight of 6,000 pounds. I have included a link to the right to the weld-on truck hitches that we carry. You will also need to check the owners manual for the RV to make sure it is rated high enough for 6,000 pounds gross trailer weight.
view full answer... - What Are Mounting Hole Dimensions On Draw-Tite And B&W Hitch For 1987 Ford F-250 TruckI went to the warehouse and measured the mounting holes on the flange of the Draw-Tite Ultra Frame Trailer Hitch Receiver, part # 41904. The distance from the first hole to the middle hole center to center is 4-5/8 inches and the distance between the middle and last hole center to center is 9-inches. For the B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122 the distance between the first two holes is 5-15/16 inches. From the center of the middle hole to center of the third hole...
view full answer... - Recommended Trailer Hitch Receiver For a 1984 Chevy K20 Pickup To Fit Without a Rear BumperI recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 for your 1984 Chevrolet K20 as this is a universal receiver you will be able to bolt/weld on your truck where you prefer it on the frame. You are able to cut the 44" wide cross tube to best fit where you want on the frame. All our custom fit receivers like the B&W # BWHDRH25122 are designed to fit with a factory bumper and will stick out past the truck.
view full answer... - Ball Mount Compatible With An Older Putnam Hitch That Uses A 3/4 Inch Hitch PinI took a look at what we have, and I was able to find the: -Gen-Y 2-Ball Mount for 2-1/2" Hitch Receivers # 325-GH-064. This ball mount will use the larger 3/4" hitch pin # 58388 that you mentioned you have, however this ball mount is designed to fit into 3" x 3" trailer hitch receivers. If your receiver opening is smaller, you can use the Curt Hitch Receiver Reducer Sleeves # C45408. This reducer sleeve will allow you to adapt the ball mount to your 2-1/2" or 2" receiver opening. The...
view full answer... - Side to Side Measurements for B&W Class V Trailer Hitch # BWHDRH25122B&W hitch # BWHDRH25122 is designed to fit many trucks including the 1967 Ford F-350 as long as it has (or had) a stock factory bumper. Most of the trucks of that era had a 34 inch frame width which this hitch will fit. But to answer your question the distance between the side plates is 33-3/8 inches and the hole center to hole center distance is 36 inches. I measured them myself. If your frame width is the more uncommon 37-1/2 inch width then I recommend Curt hitch # C15511 which is...
view full answer... - Higher Capacity Trailer Hitches for 1987 Chevy C/K Dually Towing Car Hauler For your 1987 Chevrolet C/K Series Pickup the B and W hitch part # BWHDRH25198 that you referenced would work really great if you had a deep drop bumper but if instead you had a standard bumper you'd want the standard version of this hitch # BWHDRH25122. Both of these have more capacity than your truck has so they'd easily handle anything you'd throw at them.
view full answer... - Is Bolt Pattern between B and W Hitches BWHDRH25122 and BWHDRH25198 the SameSince the only difference between the B and W Hitches # BWHDRH25122 and # BWHDRH25198 is the style of bumper they fit with the bolt pattern is the exact same. Only difference is the height difference relative to the hitch opening and where it mounts to truck frame.
view full answer... - Highest Rated Trailer Hitch for 1984 Chevy K10 Short Bed with Step Bumper We do have trailer hitches available for your 1984 Chevy K10, however the B&W Class V Trailer Hitch Receiver # BWHDRH25122 that you referenced is only a fit for the long bed model of your truck and will not fit your short bed K10. The highest rated hitch we have available for your Chevy K10 with the short bed and factory step bumper is the Curt Class IV # C14082. The hitch will work perfectly as long as your truck has a 34 inch frame width (from outside to outside). This custom hitch...
view full answer... - Towing Package and B&W Class V Trailer Hitch Fit for a 1977 Ford F-350Yes, the B&W Class V Trailer Hitch, # BWHDRH25198, will install on a 1977 Ford F-350, but it was designed for models with a 10 inch deep drop step bumper. The receiver sits lower to allow room for the deep drop bumper. If you have the factory bumper, then you will want part # BWHDRH25122. You will also want to note that the spare tire will have to be lowered to complete the installation. It can be reinstalled, but it will likely have to be re-positioned slightly forward of the hitch....
view full answer... - Trailer Hitch Needed for a 2008 Ford F-350 is a Stake Bed Truck with Rear LiftgateSince your 2008 Ford F-350 is a Stake Bed Truck you will need to look at the trailer hitches that fit an F-350 Cab and Chassis. I have linked our selection for you to filter through. The most popular choice is the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122. It is a Class V hitch with a 2" receiver that has a Gross Towing Weight (GTW) rating of 16,000 lbs and a Tongue Weight (TW) rating of 1,600 lbs. B&W is well known for the quality of their products that are made right here in...
view full answer...
- High Capacity Trailer Hitch for 1995 Chevy C/K 3500 SilveradoThe B and W Hitch part # BWHDRH25122 would fit your 1995 Chevy Silverado 3500 if it was built on a cab and chassis model. Which easy way to determine this is to measure the truck frame from outside to outside. If this measurement is 34 inches then you do have a cab and chassis model and this hitch fits. If you don't have a cab and chassis model B and W has the hitch part # BWHDRH25124 that's a fit instead.
view full answer... - Recommended Trailer Hitch for 1988 Chevrolet SuburbanThe B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122 is designed to only fit Chevrolet C/K Series Pickups and is not a fit for your 88 Suburban, but I do have a hitch that will work for you. I recommend the Draw-Tite Trailer Hitch, part # 75500. This is a Class lll hitch and it has a 2 inch receiver opening.
view full answer... - Which Trailer Hitch Fits 1977 Ford F-250 with 34 inch Wide Trailer FrameBased on the frame dimensions you listed for your 1977 Ford F-250 you actually have a cab and chassis model which has the narrower 34 inch wide frame. That means instead the hitch you need is the Curt part # 13028 which is confirmed as a fit for your vehicle and it's cab and chassis style frame.
view full answer... - Class V Trailer Hitch Availability For A 1970 Ford F-250I do have some solutions for your 1970 Ford F-250, however, the Curt Trailer Hitch Receiver # C15800 you reference is not a fit for your truck. If your vehicle has the deepdrop style bumper, then I recommend the Curt 3-Piece Trailer Hitch Receiver # C15511. This is also a class V hitch like # C15800, and is rated for 15,000 maximum GTW and a maximum of 1,500 tongue weight. If your truck does not have a deepdrop style bumper, but rather a standard or step bumper, then I recommend the B&W...
view full answer... - Distance From Frame Mounting Surface to Top of Hitch Opening on BWHDRH25122 and BWHDRH25198The # BWHDRH25122 measures 5 inches from the frame to the top of the hitch receiver. The # BWHDRH25198 measures 7-3/8 inches from the frame to the top of the receiver.
view full answer... - Recommendation for a Class III or IV Trailer Hitch to fit a 1986 Chevrolet K-20 PickupFor you 1986 Chevrolet K20 pickup truck, I recommend the Draw-Tite Max-Frame Class III Trailer Hitch, # 75034. The Draw-Tite hitch will fit both 6 and 8 foot beds with the standard or step bumper. The hitch is a Class III hitch with a 2 inch receiver opening. The hitch has a Gross Towing Weight of 5,000 lbs and a Tongue Weight rating of 500 lbs. If you are installing this hitch on the 6 foot bed you will need to also order 6 of # 01077-011 3/8 inch spacer blocks. If you have the 8 foot...
view full answer...
- Recommended Trailer Hitch for 2006 Ford F-350 Cab and Chassis with Flat-BedI may have an option for you but we don't have any confirmed fits for flat-bed applications as there are too many variances in the different flat-bed manufactures. That said, I can confirm what fits the frame and that's the B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122 for a 6" drop or part # BWHDRH25198 for an 8" drop. If there is an overhang with the flat-bed you'll likely need a hitch extender like the Curt Hitch Extender for 2" Hitch Receivers part # C45791. I have attached...
view full answer... - Trailer Hitch for a 1976 Chevy C or K Series Short Bed Stepside PickupWe have some hitch options that fit your 1976 Chevy C or K series short bed stepside pickup. In this case the stepside bed does not matter. The length does. You can use Curt Class III hitch # 13028 or Class IV hitch # C14082. For # C14082 the frame width will need to be 34 inches (measured outside to outside). Or you can use Draw-Tite hitch # 75034-011 (does not fit models with heavy duty suspension). I have linked instructions for these hitches for you.
view full answer... - Trailer Hitch for a 1998 Fleetwood Pace Arrow Motor Home to Tow a 6,000 Pound TrailerYou are going to need to have a hitch welded to the frame of your 1998 Fleetwood Pace Arrow motor home by a qualified professional welder. The bolt-on hitches we have for RVs are not rated high enough for a gross trailer weight of 6,000 pounds. I have included a link to the right to the weld-on truck hitches that we carry. You will also need to check the owners manual for the RV to make sure it is rated high enough for 6,000 pounds gross trailer weight. There are no custom fit hitches...
view full answer... - Trailer Hitch for a 1998 Fleetwood Pace Arrow Motor Home to Tow a 6,000 Pound TrailerThe hole spacing for the hitches we carry is not available unless we were to measure them ourselves or request the information from the manufacturers. Sometimes they give it to us if we ask, sometimes they do not. And we carry a lot of trailer hitches. You cannot take a custom fit trailer hitch and install it on a vehicle it was not intended for. You would have to modify the hitch which will not only void the warranty but also can weaken the hitch and make the capacity unknown. The only...
view full answer... - Will Blue Ox Class V Hitch Fit 1995 GMC C/K Pickup Cab And Chassis Truck With Lift GateThe B&W Heavy-Duty Trailer Hitch, part # BWHDRH25122 is designed to fit a 1995 GMC C/K Cab And Chassis pickup. This hitch will fit pickups with a 34 inch frame and will not work on trucks that have dual fuel tanks. I pulled one of these from our warehouse and took a couple of measurements for you. As the attached photo shows, the measurement from the top of the receiver to the top of the bracket that attaches to the bottom of the truck frame is 5 inches. If your lift gate does not interfere...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Jared G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Cal
12/6/2020
Works great ! Strong and durable