Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(33 reviews)
Price: $224.09
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75120
Retail:$384.76
Our Price: $224.09
You Save: $160.67
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (33)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75120
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75120 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87638 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1998 - 2003 Toyota Sienna
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75120
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: cruz10/17/2023
it was a great fit and it looks of good quality, one thing to note is that it has a third hole and screw and it requires some drilling. for additional towing strength. it will require some tinkering if you install that third bolt, with only two bolts on each side it becomes the same as other towing bars on the market.
by: Tony 02/06/2024
1999 Toyota Sienna
Good hitch, easy to install.
by: Wade09/13/2018
2000 Toyota Sienna
Mounted the Draw-Tite hitch this afternoon, hole drilling was a breeze, all bolts fit, no problems
by: Tom 10/19/2021
This is my second purchase from etrailer. That should tell of their great product line up. I run a cleaning business and have to get latest product for my utility trailer! Tom K
by: John Gourley01/20/2012
2005 Toyota Sienna
I have purchased three items from etrailer, a hitch for a 2005 Volkswagen Touareg, a cargo carrier for that vehicle, and recently a hitch for a 1998 Toyota Sienna. Very pleased with both hitches and the carrier. The hitches are very well constructed and have been very pleased with how well the hitches fit the vehicles and how quickly I have been able to install them. Also great service on shipping...fast shipping and the price for shipping is right.........free!
If you need a hitch.........etrailer is THE place to go!
by: Matt 08/19/2022
So easy to install, exactly as instructions showed. Wiring for lights was precisely as shown On One Page!
Super easy. I cannot recommend etrailer enough!
by: Phil05/03/2018
2010 Toyota Sienna
The hitch arrived quickly and fit my '02 Sienna's frame rails well. There was zero clearance with the rear exhaust hanger--I smacked the hanger with a small sledgehammer to free up the extra 1/16th inch of room needed. The hitch's welds look stout and the metal is beefy. There are painted-over weld spatters, which is fine by me. Drilling the two new 1/2" holes was a minor hassle with old, dull bits--I'd recommend using a new, high-quality bit. (etrailer has one for $8--I'm sure that would be fine; no idea how the price compares to elsewhere.) Enlarging the access holes was also a learning process--the Sienna has two layers of sheetmetal there. A dremel tool would work with the right bit. I ended up using a reciprocating saw with a standard multi-use blade--a metal blade is too tall to easily fit in the existing hole. The resulting hole was not pretty, but it worked. The $2 "fish wire" from etrailer was essential--don't forget to order one, or come up with an alternate plan for threading the bolt and backing plate through the frame rail. I spent about an hour getting dialed in on the first side, and the second side took 5 or 10 minutes. etrailer has a "Curt" brand hitch for the Sienna that is slightly cheaper and doesn't require new holes. I chose this one instead because I wanted the weight on the hitch to be distributed over more of the van's frame. I'd still choose this one despite the hassle and ugly frame-rail holes, but I imagine the Curt model is fine for a lot of purposes.
by: Daniel M.09/29/2013
2002 Toyota Sienna
Excellent hitch and excellent customer service. Hitch was delayed by manufacturer and instantly heard from etrailer with information about alternative product if I chose not to wait. Glad I waited. Excellent product and informative installation instructions made this a smooth and easy self installation. Very happy with this company and will certainly order from them again.
by: George07/18/2023
Really great excellent service
by: William06/04/2018
2003 Toyota Sienna
Extremely easy to use the online ordering, my hitch got here a day earlier than the delivery time listed. This is my second purchase from etrailer, I highly recommend etrailer to anyone.
by: tom b.02/20/2015
Ordering, delivery and installation was quick and easy. Forgot to order light connection kit. Customer Service rep Erika W took care of it real fast. Every arrived in same box.
by: John09/12/2018
My initial order was out of stock and Adam called me to let me know and offer an alternative. Additionally he offered to send it 2 day delivery. I received the trailer hitch and mounted it on the car today. Fits perfectly.
by: K03/21/2023
Works great!
by: Willard B.02/18/2013
2002 Toyota Sienna
The trailer hitch was well worth the money and I got the hitch in 3 days. The ease of installation is excellent and it looks great on my van.
by: Bob05/18/2018
2003 Toyota Sienna
Product was a direct replacement of what is on the vehicle
The site was easy to use and shipment was on time as expected.
I use etrailer.com for all my trailerling needs.
Rebuilt a 1997 jet ski trailer this year also!
Thx
by: C.Long12/06/2010
It's looks good.and strong.Have some difficult time to pull nut out off the new hole. Use the electrical tape to tape down the string about 1/2 inch longer than a nut so it will guide the string to the bottom tip of nut. Im glad it works and all done. Thank you Janice you are a nice sale's lady.
by: manuel kitane03/29/2012
the product is great .. i will install..later this day..i will order some from you guys ..the package delivery is one day ahead time that i expected..ill try to order bike rack soon..
by: Jon04/06/2013
Great Hitch. However, they should tell you that you will need to unhook the exhaust in order to install it.
by: Phil M.03/30/2011
Excellent customer service. They went the extra mile to research and answer my questions. Hitch works perfectly. Thanks
by: Matthew 11/04/2022
Thanks, fit just right, quality.
by: Sal P08/14/2021
2001 Toyota Sienna
Great price, great value, fast shipping with a follow-up message from the vendor to confirm my satisfaction with the product.
by: Felipe02/12/2018
Well helloooo there!
I tell you what! This product has been great and it has met many challenges cause I use it for many things besides towing. ..thanks for the email have a great day and hopefully I'll buy other products from ya'll soon.
by: Russ M06/27/2014
Good product and excellent delivery time.
Thanks Guy's
by: William10/02/2019
2000 Toyota Sienna
Excellent site totally happy thank you. Will use your site again next time.
by: Brad F06/21/2011
Hitch went on as stated. I appreciate the speedy service and support.
25
35
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Will The Draw Tite # 75120 Clear Spare Tire On 2003 Toyota SiennaYes, you will be able to access the spare tire with the Draw-Tite # 75120, on your 2003 Toyota Sienna. I contacted our representative at Draw Tite, and he informed me that they have not had any issues with part # 75120, fitting the 2003 Toyota Sienna or clearing the spare tire. He informed me that you may want to lower the spare tire to provide easier access when installing the hitch and then raise it back into place. You should not have any issues with part # 75120 clearing the spare...
view full answer...
- Is Draw-Tite Class III Hitch 75120 for Toyota Sienna Compatible With Other VehiclesThat's easy! Draw-Tite Class III trailer hitch receiver # 75120 will fit the Toyota Sienna only, but fits all model years from 1998 through 2003. It will not fit other vehicles. Some hitches will fit more than one vehicle, since for example there could be a GMC and Chevrolet version both of which are compatible because they use the same frame, but in terms of a random fit on another car, not so. Hitches are designed for specific vehicles' frame attachment points and cannot be modified...
view full answer... - Which Draw Tite Hitch Fits 2000 Toyota SiennaThe Draw Tite hitch part # 75237 that you referenced fits 2004 through 2017 Toyota Siennas. If you have a 2000 model instead you'd need the part # 75120 which is a confirmed fit.
view full answer... - Needing a Hitch on a 1998 Toyota Sienna That Can Support the Weight of a MotorcycleWe do offer a hitch that will fit a 1998 Toyota Sienna, but the Draw-Tite Hitch, # 75038, that you referenced will not fit this vehicle. This hitch is designed to fit the frames of domestic model Ford and Dodge trucks. I you are needing a hitch for minor towing and for standard hitch accessories like a bike rack, the Draw-Tite Max-Frame # 75120 is a confirmed fit for the 1998 Toyota Sienna. This hitch will has a 2 inch receiver opening and is rated Class III. Before you can haul you motorcycle...
view full answer... - Is Drilling Required to Install Draw-Tite Class III Hitch, Part # 75120 on 2000 Toyota SiennaInstalling the Draw-Tite Class III hitch, part # 75120 would require drilling. I attached the installation instructions for you to check out. We also carry the wiring harness for the Sienna to provide a connection for trailer lighting. The Hopkins Wiring Harness, part # 43475 is specifically designed for your Sienna. Installation is simple, with no cutting or splicing required.
view full answer... - What is the Recommended Torque Spec for Installing Draw-Tite Hitch 75120 on 2002 Toyota Sienna XLEThe Draw-Tite Class III hitch # 75120 that you referenced will require two different torque specs for its included installation hardware. On each side of the hitch you will install the two M10 x 1.25 bolts, and one single carriage bolt. At right I have linked the installation instructions for your review and these include the torque specs for each of the fasteners. Any hitch will deliver its rated performance only when installed to the exact specifications laid out by the manufacturer. Also...
view full answer... - Bumper Clearance with Draw-Tite Trailer Hitch on 1998 Toyota Sienna We haven't had a chance to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75120 on a 1998 Toyota Sienna so I can't provide an exact hitch pin hole to bumper dimension but I did go out to our warehouse to take a measurement on the hitch that will help you determine where the receiver will sit on your van. On the Draw-Tite # 75120 I measured a distance of right around 6 inches from the front bolt hole on the mounting brackets to the center of the hitch pin hole. What you can do...
view full answer...
- Is it Required to Use all 6 Bolts to Install the Draw Tite Hitch part # 75120It sounds like you have the Draw Tite Hitch part # 75120 for your 2003 Toyota Sienna. I can only recommend that you install this hitch per the manufacturer recommendations by using all 6 of the installation points. Otherwise the warranty would be voided. If you need trailer wiring you would want the Hopkins Harness part # 43475. For a ball mount, hitch ball, and pin and clip, I would recommend the etrailer Ball Mount Kit, part # EBMK4. This is a kit which includes 2 ball mounts, a 1-7/8...
view full answer... - Parts Needed to Tow Trailer with 2002 Toyota SiennaTo tow a trailer with your 2002 Toyota Sienna requires first a trailer hitch like the part # 75120. Which is a confirmed fit. Then for trailer wiring you would want the part # C55418 which is also a confirmed fit. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with...
view full answer... - Can a 2000 Toyota Sienna be Flat Towed Behind a Motor HomeI checked an online copy of the owner's manual for the 2000 Toyota Sienna. It does not specifically say anything about flat towing the vehicle but it does say that if the vehicle has to be towed then the front wheels need to be off the ground or damage to the transmission can occur. For this you would use a tow dolly and not a flat tow set up. For a tow dolly we have # RM-2050-1. there are also some rental places that can rent a tow dolly. I also recommend speaking with a technician at...
view full answer... - Is Drilling Required to Install Draw-Tite Trailer Hitch # 75120 on a 2001 Toyota SiennaIn order to install the Draw-Tite trailer hitch, # 75120, you would need to drill 2 holes, 1 on each frame rail. I have included a link to the installation instructions for you to view. Drilling the holes will not be that difficult. You will attach the hitch to the 4 (2 on each side) holes that are already there. Then you will use the hitch as a template and drill the holes for the remaining two attachment points. Using a special high quality drill bit like the 1/2 inch rotabroach bit...
view full answer... - Will the Thule Apex 5 Bike Rack Fit on a 2002 Toyota Sienna with a Draw-Tite HitchYou are correct, the Draw-Tite Hitch # 75120 will work for your 2002 Toyota Sienna and unfortunately some drilling is required. The upside to installing a trailer hitch on your vehicle is that it is only a one time thing. Once you have the hitch installed, your Thule Apex 5 bike rack will work well. Another advantage to installing a trailer hitch on your vehicle is having the ability to tow a trailer if the occasion arose. I have listed a few more items that you will need to complete...
view full answer...
- Hitch for 2002 Toyota Sienna for Use with Hollywood Racks Recumbent Bike Carrier # HR1000Z-RYour 2002 Toyota Sienna can be equipped with two classes of hitch, either a 1-1/4-inch Class II type or a 2-inch Class III. The Hollywood Racks Recumbent Bike Carrier # HR1000Z-R that you are purchasing will fit BOTH sizes of hitch, but for broad compatibility with accessories and safety margin I suggest a Class III hitch. The link provided will show you all 2-inch Class III hitches for your 2002 Sienna. I suggest the Draw-Tite hitch # 75120 for its 350-lb tongue weight capacity. This...
view full answer... - Trailer Hitch for 2001 Toyota Sienna and Thule Hitching Post Pro for 2 Adult Bikes and 1 Kid BikeYes, the Thule Hitching Post Pro bike rack # TH934XTR will hold 2 adult bikes and 1 kid bike. Keep in mind that if you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. It will also help you to load bikes that are small like some kids bikes. I have linked a video showing how the...
view full answer... - Trailer Hitch, Wiring and Accessories for a 1999 Toyota Sienna XLE to Tow a Boat TrailerThe Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit # 75120 does require drilling to install on your 1999 Toyota Sienna, the Draw-Tite hitch # 36298. I have included a link to the installation instructions for you. You would also need the ball mount kit # EBMK4, this will give you the ball mount, 2 balls, and the pin and clip. For trailer wiring, use # 43475. I have included some instructional links on the wiring as well. If the boat has an electric reverse lockout feature and...
view full answer... - Trailer Hitch Recommendation for a 2000 Toyota Sienna for Camper TowingBoth the Draw Tite Hitch part # 75120 and the Curt Hitch part # C13511 would work well on your 2000 Toyota Sienna. The only reason I would go for the Curt is because it costs less and has more positive reviews than the Draw Tite currently. This hitch has a 350 lb tongue weight capacity so it would work well with your cargo carriers. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
view full answer... - Does The Class III Frame Trailer Hitch, Item # 75120, Require Drilling on the 2002 Toyota Sienna VanFor the Class III Max-Frame Trailer Hitch Receiver, item # 75120, drilling will be required for installation. the installation is as the instructions read. Some items you may need to complete your towing setup include. DrawBar Kit # EBMK4 Wiring Harness # 43475 Hitch Lock # e98879 Bike Rack # S64670
view full answer... - Towing Set Up for 2000 Toyota SiennaAs far as a license, you can tow with your normal driving license, yes. As far as the capacity of your 2000 Toyota Sienna I looked at an online version of your owner's manual and it stated that the maximum towing capacity without the towing package is 2,000 lbs and with the towing package it is 3,500 lbs. If you are unsure if your Sienna has the towing package you can contact your local Toyota dealer with your VIN and they will be able to tell you. Keep in mind if your trailer and cargo...
view full answer... - Trailer Hitch Recommendations for 2000 Toyota SiennaI would recommend the Draw-Tite Class III receiver, part # 75120. A Class III hitch uses the 2 inch receiver opening, versus the 1-1/4 inch opening used by the Class II. Having the more common Class III will allow you more flexibility in choosing hitch mounted accessories like bike racks or cargo carriers. According to my research, the 2000 Sienna has a 2000 lb towing capacity, or 3500 lbs if equipped with the tow package. If you do not know if the van has the tow package, you can call...
view full answer... - Recommended Brake Controller for 2000 Toyota SiennaEither the Curt Class III # C13511 or the Draw-Tite # 75120 would be an excellent choice that would work very well for you. Both hitches have similar capacities and would install in similar manner. The Hopkins # 43475 trailer wiring harness you referenced would work just fine. A brake controller is not a vehicle specific item, you can use just about any controller on just about any vehicle. I would highly recommend a proportional controller like the Tekonsha Prodigy P2, part # 90885. A...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tom
10/19/2022
Gee, this trailer hitch receiver has been exactly the ticket I’ve needed! The fit, the available use and the pricing has been essential to my business! I’d be out of touch without it! Thanks