Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
Item # 41947
Our Price: $368.57
Confirmed to Fit
1984 Chevrolet C/K Series Pickup
8 Foot Bed with Standard or Step Bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (58)
- Q & A (0)
- Photos
1984 Chevrolet C/K Series Pickup - Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
- 2 Inch Hitch
- Class V
- 15000
- Visible Cross Tube
- Draw-Tite
- 1600
- 16000 lbs WD GTW
- 1600 lbs WD TW
- Custom Fit Hitch
Perfect for marine and heavy-duty applications, this Chevrolet C/K Series Pickup trailer hitch receiver is strong, durable and corrosion resistant. Tested Tough guarantee ensures that the hitch exceeds industry standards.
Features:
- Custom fit is designed specifically for your Chevrolet C/K Series Pickup
- Steel construction with computer-aided design ensures strength and durability
- Heavy-duty side brackets welded on
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 15,000 lbs
- Maximum GTW when used with weight distribution: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Maximum TW when used with weight distribution: 1,600 lbs
- Maximum gross trailer weight: 15,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41947 Draw-Tite Class V Ultra Frame Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
15,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Gross Towing Weight (GTW):
15,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
1,600 lbs.
Tech Tip
Hitch does not fit models with a deep drop bumper. Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside
California residents: click here
Complete Towing Package for 1984 Chevrolet C/K Series Pickup
Package Price:$523.02
1984 Chevrolet C/K Series Pickup Owners Who Purchased This Trailer Hitch Also Bought...
Popular C/K Series Pickup Trailer Hitch Accessories
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" - 41947
Average Customer Rating: 4.2 out of 5 stars (58 Customer Reviews)
Perfect for marine and heavy-duty applications, this vehicle trailer hitch receiver is strong, durable and corrosion resistant. Tested Tough guarantee ensures that the hitch exceeds industry standards.by: Joe03/05/2023
2014 Winnebago Vista Motorhome
This thing is super beafy. It's fairly easy to install. I had to drill all 6 holes. I installed this on a 2013 Ford F53 Winnebago 35B. Definitely worth the upgrade.
by: Julian08/14/2023
1984ChevroletC/K Series Pickup
Carol,
You asked for a review, here it is:
1. Like so many others, my package arrived with holes and in terrible condition.
2. Inspecting the contents, the ears on the crossbar were bent and denuded of powder coating.
3. The plastic bags, overloaded with hardware, were torn and I will have to inventory parts to assure that all are there.
4. It looks like I will have to bend the ears back into place so the crossbar will fit between the frame rail mounts correctly. This is likely to remove more powder coating.
5. I will be installing the hitch shortly and will contact you if there are parts missing.
Shipping 70 pounds of fabricated steel in a single sided cardboard box without packing materials and without strapping is ludricrous. $3 of styrofoam block and $1 of strapping would have saved me time I will now have to spend to straighten the pieces for proper fitment. I hope you and your company are making loads of money because you clearly care nothing for your customers. The only question remaining is what you intend to do about these problems in the future.
Please do not send me a simpering apology filled with disingenuous statements or blame placed on others. Put your shipping team to work to design and package these shipments so that upon arrival at your customers' location they are intact and undamaged:
1. Double sided cardboard box.
2. Styrofoam sheets top and bottom.
3. Styrofoam blocks either side of crossbar limiting movement with pockets for hardware.
4. Styrofoam endcaps in the box.
5. Nylon strapping pulled tight around the sides and end of box.
What is better?
1. $5 less profit?
2. Unhappy customers?
These are decisions for your management team.
Katrina D.
8/25/2023
I'm sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Helpful Links
by: Alex08/14/2023
1979 GMC C/K Series Pickup
Don't recommend.
It did not fit my truck as described, I have a 79 GMC pickup, and it left a 1"+ gap between the receiver and the frame on the most inside holes.
On top of that the box arrived all messed up, no hardware, the receiver is pretty strong, but was all scratched out.
by: Rudy11/15/2023
1987 GMC C/K Series Pickup
Great company, for sure!! Bought this to install on my recently acquired 1987 GMC crew cab dually, to be used as a moving and tow rig to trailer my cars south. Installation was straight forward, a bit of drilling and rivet removal, which I was prepared for. Took a bit of time, as you may guess, but I was definitely able to skip the gym today because of it. Loses one star for chipping paint on the side pieces, I'll need to paint to prevent corrosion. Also, one tab on the crossbar was bent, so I had to straighten it to ensure the bolts torque specs were true. I'm very confident it will be up to the task at hand.
by: Paul03/11/2024
1982 ChevroletC/K Series Pickup
I like the product but the packaging needs improvement.
Only missing one and the threads on some of the other bolts are damaged.
Jenny N.
3/16/2024
Oh my goodness! Customer Service will be in touch so that we can have the hardware shipped out to you.
by: Angel04/26/2023
2008 Chevrolet Kodiak
First one got lost in shipment, second one arrived last night. I have not installed it as of yet. It was received damaged.
Maybe a little better packing would help.
by: Jamie 02/28/2024
2005 GMC Sierra
Product worked great
by: David09/09/2022
The hitch looks well-made and very heavy duty my poor rating comes from the poor packaging and the hitch was damaged in transit. The end of the crossbar was sticking out of the box when it was delivered to my house there was not adequate packing in there to keep everything stabilized and there are many places where the paint is chipped off . The bracket on one end of the crossbar is bent due to the poor packaging and the fact that it came out of the box . I am very disappointed .
Heather A.
9/27/2022
I hate to hear that your hitch came scratched! I recommend to touch it up with a rust prevention spray paint. I sent our information to customer service and they should be reaching out soon.
by: David04/07/2019
2013 Ram 3500
Does fit my 97 3500 GMC cab and chassis with the second fuel tank, as promised. Unfortunately, it DOES NOT fit with my second fuel tank armor plate, which had to be removed for installation. I will do some cutting and hopefully be able to bolt it back up with 4 of the 6 bolts, which will be better than nothing.
This is a better hitch for a truck that is lifted a bit higher than mine, as I used the top-most holes for the cross member, and the side fins hang down a clownish amount. Hopefully it will not be a problem in my frequent off road uses. Unloaded, the fins are 13 1/2 inches off the ground.
A very beefy and solid thing, this should tow whatever I need it to, and in the end, function over form. Maybe I will work on a custom rear bumper that will help to hide it some.
David
4/8/2020
The side plates hit the ground when I would go over curbs, or try to back up a hill. It was a small problem, but still a problem. I sold the truck to someone who was going to OTR with it, and he loved it.
by: Jeane12/20/2021
2003 Ford F-350, 450, and 550 Cab and Chassis
Came in box all tore up and taped back together i have to repaint the hitch because it was slammed around and chipped it off
Sierra K.
12/21/2021
Customer Service will reach out to you.
by: Kent10/12/2018
Ford F-350 Super Duty
The hitch works great, but was not a simple install. None of the holes on the rails matched the frame on my chassis cab F350. I had to trim and make mods to this hitch to make it fit. Not what I expected at all. I am a metal fabricator by trade, so no big deal to me, but others wouldn't have the ability to install this hitch on the same truck as mine. The fit description needs to be reviewed and revised.
Mike L.
10/13/2018
Per the installation instructions, drilling is required to install this hitch on a 2011 Ford F350 Cab/Chassis, so the mounting holes in the hitch wont necessarily match up with existing holes in the trucks frame.
by: Kj08/14/2023
I git the part like you say I wood gate it on time I well tall to us you on part thank you and have a very nice day
by: Kerry E.05/30/2019
I don't want to discourage anyone from buying this hitch. That said, I probably shouldn't go into great detail, as to how I use it. I replaced a class III hitch on my motorhome, to carry a 700 pound motorcycle on a carrier. It it designed to fit 36 inch frames, but simply reversing the brackets, it now fits a 42 inch motorhome frame. Nuff said. It does the job very well.
by: Rodney D.04/11/2019
2018 Ford F-350 Super Duty
The hitch is doing every thing I need it to do. The one problem that I had with it was. I was told it would fit a F-350 2018. With the mounting we had to drop the fuel tank, to get at the rear bolts. Also we had to add a 1/4" plate to both ends of the hitch, evidently the 2017 frame is a half inch narrower then the 2018 model. Once we did that everything went together with out any problems.
by: Cowboy11/21/2020
Great product. Heavy duty. I had to drill 4 holes in frame. Looks good. 1987 Chevy V20 4wd 3/4 ton.
by: Brandon B. 10/23/2017
1987 ChevroletC/K Series Pickup
Hitch came to me in good condition and looks very well built. However, I purchased this for a 1987 Chevrolet dually and it is not a fit for my truck. The first issue I found is with the spare tire. The side brackets are so deep there is no way to get around them to relocate the spare, they simply hang down too far. The hitch is at a good height in the uppermost holes. I attempted to install anyway only to find the center holes directly under a crossmember that would not allow space for a bolt to drop in. Overall looks to be a quality product for whatever its intended purpose just not workable on my square body dually. An expensive paperweight.
by: Theo G06/23/2020
Chevrolet
After years of comparison I bought this hitch for my US Army 1986 Chevy CUCV M1028 pickup. It had the right dimensions for simple mods to fit the truck, for which no commercial hitch will fit. We had to cut an L notch on both sides of the upright, to clear the shock mount. But there is plenty of steel there. By removing some of the bumper bracket, I was able to retain the bumper mount pieces, less 2.
by: Gerald05/01/2011
Excellant heavy product. It took a little fitting to the frame, only because this went on a military truck. Finished project is neat and will haul well
Joe
12/2/2012
did you install this hitch on a m1008 cucv? if so did you need to cut one set of bumper brackets? trying to find a hitch that I dont have to hack up the stock cucv bumper brackets to install
by: Mr. Galloway02/20/2017
1969 ChevroletC/K Series Pickup
This hitch is being used on a custom 1969 Chevy C50 pickup truck. I won't be using this truck to haul, it's only for show. It was easy to install, and it looks perfect on the frame. You can't have a truck this big without a big hitch on it.
by: Mike M.08/21/2017
1986 GMC C/K Series Pickup
This receiver is well made and was not too bad to install. It should be noted that it is more of a "universal" hitch in that it fits multiple vehicles. This does require drilling holes in your truck's frame, which is not a difficult job, but it's not a direct bolt-on hitch. I had to make provisions for my true dual exhaust which added some time to the install, but overall it took about 3 hours to remove my rear bumper, the old class III hitch, and install this one. I use my 1986 GMC C3500 to tow my 24' enclosed car hauler.
by: David 01/13/2021
The product is great; of high quality. The delivery was prompt. I will do business with etrailer.com again
David M.
1/14/2022
fantastic
by: James07/30/2020
1972 GMC C/K Series Pickup
Ordered a Class V hitch, controller and wiring and actually received earlier than expected. Great customer service, had looked at one hitch which I thought would work and after talking to customer service purchased another recommend hitch which was best suited to my application.
by: Dale11/28/2018
1986 ChevroletC/K Series Pickup
Instructions say you need a 9/16 drill bit to drill the holes for the hitch. In all reality you need 11/16 inch to drill the holes in the frame to mount the hitch. I actually used a 3/4 drill bit to complete the install.
by: Caleb03/27/2018
1987 GMC C/K Series Pickup
Very heavy duty. Hardware kit was missing due to UPS. Called customer service and they shipped out a new hardware package right away. Great products and great customer service.
by: Ron E08/15/2018
I received the hitch as promised. I have not tried the installation as of today but I have no reason to say anything bad or good concerning the product. So should any more opinions be needed, send another request a week from today and I will answer and I will answer at that time.
25
58
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Installing Draw-Tite Ultra Frame Trailer Hitch Receiver, Class V on 1978 Chevrolet PickupTo install the Draw-Tite Ultra Frame Trailer Hitch Receiver, Class V # 41947 on your 1978 Chevrolet Pickup with 8 foot bed you will want to position the brackets so that they miss frame and suspension components, such as the rivet you mentioned. This hitch is not designed to use any kind of rivet on your vehicle for installation. For installation you will need to drill 3 holes in the frame on each side to feed the bolts through the frame and the hitch. I've attached the installation...
view full answer... - How to Pick Out a Trailer Hitch for a 1985 Chevy TruckThat is going to depend on what style 1985 Chevy Silverado you have. The Draw Tite part # 41947 will fit if you have 6 foot or 8 foot bed with standard or step bumper. For a deep drop bumper you would need the # C13099, or for a cab and chassis # 13028 which has been confirmed to fit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch...
view full answer... - Trailer Hitch for Towing with a 2012 Chevy TahoeThe only trailer hitch that was designed for your 2012 Chevy Tahoe is the Curt Trailer Hitch Receiver # C13161. The Ultra Frame Trailer Hitch Receiver # 41947 is a pretty big hitch that is designed for a 2012 Chevy Silverado 3500 cab and chassis model which is pretty different to what you have. With that being said, it looks like your Tahoe has a towing capacity range of 5,200 lbs - 6,000 lbs so since the Curt is rated for a max of 6,000 lbs you will be able to tow with your Tahoe to it's...
view full answer... - Correct Trailer Hitch for 1977 Chevy C10 with Heavy Duty SuspensionI checked with Draw-Tite and although the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75034 is not listed for models with the heavy duty suspension, the Ultra Frame Trailer Hitch Receiver part # 41947 is so this is what I recommend. I also checked with Curt but there was no mention of fit on models with the heavy duty suspension.
view full answer... - Heavy Duty Trailer Hitch Receivers For 1989 Chevrolet C/K Crew Cab PickupI cannot determine which rear bumper that you have from your picture so I will give you to options based on which bumper you have on your 1989 Chevrolet K3500 Crew Cab Pickup with the 8' bed. The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 is designed to fit your Chevrolet with the standard or step bumper. This class V receiver is capable of towing 15,000lbs or 16,000lbs if you use a weight distribution hitch. The tongue weight rating is 1,600lbs for either style hitch or hitch...
view full answer...
- Recommended Draw-Tite Trailer Hitch Receiver For 1969 Chevrolet K10 PickupBoth the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 and Draw-Tite Ultra Frame Trailer Hitch Receiver # 41938 are a confirmed fit for you 1969 Chevrolet K10 as long as you have an 8 Foot bed and both options will require some drilling for the installation. Since they both install in the same location both will fit the same, with the only differences being that the # 41947 will hang down lower due to the longer side bracket as seen in the included picture. My preference is the...
view full answer...
- Speciality Trailer Hitch for a KZ E200S Trailer to Tow a 15 Foot Bass Tracker BoatThe frame mount trailer hitches that fit on RVs and trailers are sort of universal products though they may not fit on everything like you have found out with the Curt hitch # 13703. A hitch such as # C13701 has fewer mounting options and fits a smaller range of frame widths (18 to 51 inches wide). Take a look at it and the instructions I have linked to determine if it is a better fit. The other options include using a weld-on truck hitch, see link, or to have a hitch custom fabricated...
view full answer... - Trailer Hitch Fit for 1995 Chevrolet K3500 with Modified Truck BedAt least 2 of your photos came through with the question, thank you for submitting those! Since there have been modifications made to your 1995 Chevrolet K3500, I cannot guarantee that a custom fit hitch for the 1995 K3500 cab/chassis will still fit your truck. I recommend going with a weld-on trailer hitch. The highest weight capacity hitch that I recommend for your truck is the Draw-Tite Class IV Weld-On Ultra Frame Trailer Hitch Receiver # 41990. This hitch offers a 2 inch receiver...
view full answer...
- Hitch to Fit Older Vehicle with 34 inch Wide FrameSince you have a 34 inch wide frame we may have something that could work with a bit of fabrication on your part. 34 inch wide frames (measured from outside to outside) is a very common frame width for cab and chassis trucks. Check out the part # 41947. This hitch fits a 34 inch wide frame and has several height adjustments on the crosstube to allow to match what your vehicle would need.
view full answer... - Trailer Hitch Recommendation for a 2000 Chevy C3500 with Utility BedFor your 2000 Chevy C3500 with the utility bed your best option is going to be a hitch designed for models that have the 10 inch deep drop bumper such as # C13099. that will drop the receiver down far enough but it or any hitch will be recessed a good amount under the vehicle because of the utility body. There isn't a way around that other than to use an extra-long ball mount like # BM20 which is 13-1/4 inches from the center of the hitch pin hole to the center of the ball hole.
view full answer... - Trailer Hitch Recommendation for a 1987 Chevy C/K 1500 With a Deep Drop BumperA deep drop bumper is a bumper that hangs further below the frame than a standard bumper. Check out the photo that I attached showing a deep drop bumper compared to a standard bumper and a step bumper. We have three frame mount trailer hitches that will work with a deep drop bumper on your 1987 Chevrolet C/K 1500. You could install the Curt Hitch, # C13099 or the Draw-Tite Hitch, # 41504. These are all Class III trailer hitches that have a towing capacity of 5,000 lbs and a tongue weight...
view full answer...
- Trailer Hitch Recommendation for a 1985 GMC C10 Short Bed 2WDThe Class V Ultra Frame Trailer Hitch Receiver # 41947 is compatible with a 1985 GMC C/K Series Pickup with either the 8' bed and standard or step bumper, or a cab and chassis model. Since you have a short bed on your C10 I recommend going with the Class IV Curt # C14082 which fits the 6' bed that utilizes a standard or step bumper. This is a custom fit that doesn't require drilling and fits as long as your frame is 34" outside to outside. If you used to have the standard or step bumper...
view full answer... - Recommended Hitch & Brake Controller for 1999 Ford F-450 Cab-and-ChassisI recommend a Class V hitch for your Gulfstream that is based on a 1999 Ford F-450 cab-and-chassis. These are available in both 2-inch and 2-1/2-inch receiver sizes and in tow ratings up to 20K. All can be seen on the linked page. All require drilling into the frame and all include the necessary installation hardware. You'll want to check your frame width. Most of these hitches are meant for a 34-inch fame width (as measured from outside to outside at the frame rails). You can click on...
view full answer... - Trailer Hitch Fit on a 2019 Chevy C3500 Cab and Chassis 4x4 with Extra Fuel TankThe Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 will fit your 2019 Chevy 3500 Cab and Chassis 4x4 with extra fuel tank. The extra fuel tank will not change the mounting location of the hitch so it will work fine based on my research.
view full answer... - High Capacity 2-1/2 inch Trailer Hitch that Fits 2002 Ford F-350 Cab and ChassisFor a high capacity trailer hitch that fits your 2002 Ford Super Duty Cab and Chassis that is a 2-1/2 inch size we have the Curt Class V part # C15845 which has a 27,000 lb total trailer weight capacity.
view full answer... - Recommended Trailer Hitch, Wiring and Brake Controller for 1994 Chevy C/K Series Cab and ChassisThe Draw-Tite Class V hitch, part # 41947 will most likely work for you. The hitch has a drop (distance from the bottom of the frame to the top of the receiver tube) that's adjustable to 6-5/8, 8-1/4 or 10-1/4 inches. One of these distances should allow your receiver tube to clear the bottom of the back bumper, but you'll want to measure the distance from the underside of the frame member to the lowest point of the rear bumper. For wiring, you'd begin with a 4 pole, provided by # 118315....
view full answer... - Gooseneck Hitch Option For the 1995 GMC C/K Series Cab and ChassisI do have an option for you but there is currently not a custom fit goose neck hitch available for the 1995 GMC C/K Series cab and chassis. Instead I recommend the weld on B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks part # BWGNRK1500 which will give you a 30,000 lb gooseneck ball on your flat bed. When you are done towing you can unlatch the ball, flip it over and store it in the gooseneck hole. I have attached the installation instructions of this hitch for your...
view full answer... - Trailer Hitch Recommendation for a 2016 Chevrolet Silverado 3500 HD TruckI can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer hitches below that will fit your vehicle, but the Reese RP45302 is not one of them. I also included a link on this page to take you directly to the page of the 5 hitches that will fit your vehicle for your convenience. 2 inch receiver opening: Draw-Tite...
view full answer... - Trailer Hitch Solution for 2017 Ford F-350 with 34 inch Frame34 inch wide trailer frame indicates you have a cab and chassis F-350, which we do have solutions for that. But if you have an RV built on a F-350 frame then we don't have a fit that I can guarantee will fit since the rears of those are quite a bit different in dimensions than most vehicles and vary from motorhome to motorhome. The # 41947 will fit a 2017 F-350 Cab and Chassis and it is a Class IV hitch though. If your Ford isn't a motorhome this would be a great option. The other option...
view full answer... - How to Choose a Trailer Hitch for a TrailerI may have an option that will work for you, however the Draw-Tite Ultra Frame Class V Hitch, # 41947, is a custom fit hitch designed for full size pickup trucks. Frames on trailers are typically wider than frames on vehicles and the frame width can differ between trailer manufacturers. Because of this, trailer hitch manufacturers offer adjustable width trailer hitches. Unfortunately there are no custom fit trailer hitches for certain makes and models of trailers. Before selecting a trailer...
view full answer... - Is there an Aftermarket Hitch Available for a 2005 F-150 With a Factory Hitch?The factory hitches that come on the 2005 Ford F-150 actually tie into the structure and stability of the bumper, so a custom fit aftermarket hitch will not be able to be used, unfortunately. From looking at the frame where an aftermarket hitch would attach, the Draw-Tite # 41947 will not be able to be used either. This is also designed to fit the F-350, F-450, and F-550 cab and chassis model truck so the frame width will also be quite different.
view full answer... - Complete Towing Setup for a 2005 Ford F-450 Cab and ChassisThe first thing I would do would be to check the end of the frame on the truck and see if there is actually space to install a trailer hitch. If the truck is similar to the one in the picture you provided, then I do not see a way to mount a hitch with the components underneath the dump bed. If space is available, you could use one of the heavy duty hitch options from Draw-Tite like part # 41947, which is a class V hitch rated up to 16000lbs towing capacity. I am including a link to the...
view full answer...
- Recommended Trailer Hitch Receiver, Trailer Wiring, and Brake Controller for 2002 Ford F-450 ChassisFor the weight capacity and ease of installation, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class V # 41947. This hitch is a confirmed fit for your vehicle. For your wiring harness, I recommend the 4-Pole Hardwire Kit with Circuit Tester # 18252 which will splice into your current tail lights. Then you will need # 10-2-1 sold by the foot to reach the factory run wires along the rear frame rail along with the Hopkins Endurance Quick-Install Trailer Connector Adapter...
view full answer... - Trailer Hitch Recommendation For 2002 Ford E-350After speaking to my contact at Draw-Tite about your 2002 Ford E-350 Van, I recommend the Draw-Tite Trailer Hitch # 41906. It is a 2-inch receiver with a maximum gross trailer weight of 10,000 lbs and a maximum tongue weight of 1000 lbs. It is custom fit for your van and requires no welding for installation. I have provided a link to the installation instructions for this item as well as a link to a video showing the installation of this hitch on a 2003 Ford E-350 van. While it is a different...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
3/6/2024
Still going strong a year later. Super happy with this hitch and purchase.