Recommended Draw-Tite Trailer Hitch Receiver For 1969 Chevrolet K10 Pickup

Question

Question:

I have been looking at your website for a trailer hitch and narrowed it down to draw tite 41947 or 41938. I have a 1969 chevy K10 it looks like the 41947 provides a better fitment. can you give me your best recommendation for my model.

asked by: Joe O

0

Expert Reply:

Both the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 and Draw-Tite Ultra Frame Trailer Hitch Receiver # 41938 are a confirmed fit for you 1969 Chevrolet K10 as long as you have an 8 Foot bed and both options will require some drilling for the installation.

Since they both install in the same location both will fit the same, with the only differences being that the # 41947 will hang down lower due to the longer side bracket as seen in the included picture.

My preference is the # 41938 due to it having a shorter side bracket meaning less of the hitch will be visible when the installation is complete.

expert reply by: Samuel C

0

click to enlarge

Answer 1

The 2017 GMC Sierra 3500 cab-and-chassis is a confirmed fit for the Draw-Tite Ultra Frame Trailer Hitch #41947 so long as the truck frame width dimension is 34-inches from outside edge to outside edge. This frame dimension requirement applies to…

view full answer...

Answer 2

The Ultra Frame Trailer Hitch Receiver #41947 has an adjustable cross-tube that allows the receiver to be moved into a variety of height adjustments. There are 3 locations on that this hitch can be mounted in (see attached photo diagram): Height…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Recommended Draw-Tite Trailer Hitch Receiver For 1969 Chevrolet K10 Pickup

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching