THIS ITEM IS NOT A FIT FOR
2009 Chrysler Town and Country
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
Item # C15324
Retail:$556.82
Our Price: $298.12
You Save: $258.70
2009 Chrysler Town and Country
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (156)
- Q & A (0)
- Photos
CURT Trailer Hitch - C15324
- Class V
- 2 Inch Hitch
- 16000 lbs GTW
- Visible Cross Tube
- CURT
- 2400 lbs TW
- 17000 lbs WD GTW
- 2400 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,400 lbs
- Maximum TW when used with weight distribution: 2,400 lbs
- Maximum gross trailer weight: 16,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"
Installation Details
This Product Fits The Following Vehicles
- 2003 - 2006 Chevrolet Avalanche
- 2003 - 2006 Cadillac Escalade
- 2003 - 2006 Cadillac Escalade EXT
- 2003 - 2006 Chevrolet Suburban
- 2003 - 2006 Chevrolet Tahoe
- 2003 - 2006 GMC Yukon
- 2003 - 2006 GMC Yukon XL
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15324
Average Customer Rating: 4.9 out of 5 stars (156 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Steven 04/08/2024
Hitch fit perfect and installs easily. Only thing I don't like is the part you attach the safety chains to is very thick so not all the chains fit on it. But I'm sure that was done for strength.
by: David 01/29/2024
We haven't used the hitch too many times, but it's worked great when we have. Before I installed it, I painted over the corners, as well as added silicone in the gaps where pieces meet & there wasn't a weld... just for added corrosion protection. No complaints, as it's just a hitch and works as such.
by: Jerry 05/11/2024
Great hitch! It was easy to install and does the job perfectly!
by: David R04/10/2018
2004 Cadillac Escalade
So Happy with this Curt Custom Heavy Duty Class V Receiver Hitch.
Fits Perfectly behind my plastic bumper on my 2004 Cadillac Escalade EXT.
It looks factory installed. Definitely more stout in construction than the OEM
that came off. OEM receiver hitch was rated for 5000 pounds, this Curt is rated for 17000 pounds, Big Difference. Took me by my self less than 1 hour to install. I used the Curt supplied bolts and factory bolts per instructions. I had the factory trailer light receptacle trimmed and tack welded to the Curt Hitch. I have a large boat and now confident in this heavy duty hitch. Thanks etrailer here are some pictures
by: Dexter03/17/2023
2006 Chevrolet Suburban
Best price and best quality. This hitch has paid for itself 10 fold.
by: Jake 01/02/2024
Excellent product. Super easy to install. Came with all mounting hardware and arrived quickly. Strongly recommend etrailer for your needs.
by: Jack Y.08/21/2022
Replaced the factory rusty hitch with this heavier duty one. Easy to install, however receiver does sit about 1-1/2” higher than the factory one. Pulling my 29’ travel trailer feels more stable, not sure if it’s because the receiver is higher or it’s just a sturdier hitch.
by: John 11/18/2023
2003 Chevrolet Tahoe
The product fit as described with minimal effort on my 03 Tahoe. I did however reuse the bolts I took out of my existing hitch due to they where bigger in diameter than what whas provided. Very impressed overall and highly satisfied with the whole process. I am a first time customer and will be passing the name along for sure!
by: Matt A10/17/2023
2004 Ram 3500
Fit perfectly on my 04 Suburban 1500. Fantastic upgrade from the 3500 lb universal one that a previous owner had installed. Considerable overkill for my truck, but I like that.
by: Robert 04/10/2024
Everything fit good and work without pr oblems
by: Danny1307/07/2020
Very nice and heavy duty hitch. Install was no problem. Installed on 2003 gmc yukon xl denali in about an hour. Replaced a original rusted out hitch. I have denali trim package so rear bumper cover may protrude a bit...no big deal. If you have regular yukon should be fine.
by: Richard J11/11/2019
This hitch fits great and I didn't have to remove the spare tire. Easy installation.
Richard J.
11/12/2020
This hitch has been awesome
by: Michael04/16/2020
2002 Chevrolet Suburban
Shipped quick,good price,well made. I installed this on a 2002 Avalanche 2500 with plastic cladding. There was some minor trimming required on the plastic(Dremel to the rescue).
You will need to attach the bracket from factory hitch,or add a bracket for trailer connector. It took longer to trim the plastic than it it did to install the hitch. The hitch fits like glove once trimmed,and is 80%hidden.
Factory hitch has been known to fail,due to design and wall thickness in my opinion.
The Curt class V hitch has a much thicker wall thickness and it's a square tube design rated much higher than factory for tongue weight and overall towing ability.I tow a 34 foot toyhauler that was at the limit of factory hitch,this hitch is rated 5000lbs heavier than oem and it shows once you compare the two.
by: John L.01/28/2018
2004 Chevrolet Tahoe
I bought this hitch after realizing the stock hitch on my 2004 Tahoe was undersized for my trailer. This one is rated way higher than my truck will ever be able to haul; but on towing devices, overkill isn't a bad thing. This hitch is extremely beefy, way heavier than the stock hitch. It was very easy to bolt up due to the access holes in the Tahoe frame. Removing the spare isn't necessary, but it does make access easier. The quality of the welds, paint, fitment, and even hardware is exceptional. And as always, etrailer's customer service is next to none.
by: Thomas07/19/2020
2003 GMC Yukon XL
After I realized that I was towing a boat and trailer that was almost twice the rating of my original hitch, I decided to update to the Curt Class V. The hitch is much heavier and it is very well made. The installation was very easy and all the hardware fit perfectly. I decided to move my trailer connector into the bumper at the same time.
I now have the confidence to tow my boat anywhere without worry.
etrailer had the best price and the fastest shipping. I have always had great service with them
by: Mike04/17/2020
2020 Ford F-350 Super Duty
Much heavier duty than the OEM one and appears to be well made with quality coating. It should not bend like the OEM did (why I upgraded to this beast). Was a snug fit between the rear crossmember on a 05 2500 Suburban, but easy to wedge up in there using a floor jack. The hitch sits around 2” higher than the OEM so will need to Adjust all the hitches accordingly. Only complaint is lack of integrated bracket for the trailer wiring otherwise would have been 5 stars.
by: Randy 06/01/2023
2005 Chevrolet Suburban
I personally feel that CURT hitches are one of the best on the market. I bought the CURT class 5 hitch and it exceeded all my expectations. It takes alot to impress me and this truly did. The quality of the material, the construction and the fit and finish were perfect. With air tools, 15 minutes at most, to install. Now as far as Etrailer. Their price was the best which included fast free shipping. I Would highly recommend, if you need trailer hitches or any trailer accessories, don't look anywhere else
by: Harold05/24/2020
I realize this not the first time I’ve ordered from etrailer
And using the fitment tool has always got me an exact match for my needs. Its been Chevy Tahoe, Suburban and Silverado. Each time has been easy bolt on. Nothing to fear. This last time I wore out the Tahoe’s factory receiver with my travel trailer so I installed the Curt XD
xx lbs rated. Beautiful clean match. Thank You !
by: Meric01/27/2021
2003 Cadillac Escalade
I made the mistake and ordered this hitch off Amazon to get it sooner. The bolt holes were about 1/4” off and it wouldn’t fit. Needless to say I had to send it back and got one here like I should have in the first place. It fit perfect without a hitch. I couldn’t help it.
by: Jeff03/16/2023
excellent hitch, fast shipping and glad I upgraded. I have had this for a year now and does everything I need it to.
Note: I installed this on a 2007 Avalanche and it is not supposed to fit. I did some research and all 6 frame bolts line up perfectly and fits well, noting that I did have to trim my rear facia to make it fit. Since the factory steel that is under the rear facia was already rotted out like the factory hitch from rust, it fits perfectly if not a few inches higher than the factory hitch - even better! I highly recommend to anyone that wants to upgrade from that factory class 3 tubular junk that is likely already rusted and starting to sag, go for this and if you have an Avalanche, it will fit if you don't mind a little triming of your facia. From the picutre, OK my trimming was not perfect, will groom this later, but you get the point. Also you will notice I did drill out for the plug socket up high, this was frankly the hardest part of the install. And yes my factory frame rails are excellent with no rust.
One more thing, Curt supplied all the new bolts which I torqued to thier instructions.
by: Chad04/21/2020
Used this to replace the factory hitch on my 2004 Tahoe. Original was extremely rusty and wanted peace of mind that my hitch was sound. The new hitch is way more robust than the factory. As always impressed with etrailer’s customer service.
by: Paul03/26/2023
2004 Chevrolet Suburban
Amazing service and excellent ease of w ebsite
by: Louis Moore06/02/2016
Scion xD
I've installed several hitches over the years, but the Curt XD is the nicest hitch I have seen. Quality welds, heavy construction and nice finish. You can't go wrong with this one.
Lou Moore
Ohio
by: Joshua H01/29/2019
2003 Chevrolet Suburban
I bought this hitch to replace my factory hitch after it was damaged when i backed into a concrete pole. This hitch is much better than the factory hitch. It looks really nice. It was really easy to install with easy to read instructions. I am very happy with it. I have confidence that i can tow a decent amount of weight.
by: Tom 06/03/2023
2005 GMC Yukon XL
It's a good tough trailer hitch recover! Looks like it's going to last forever.
25
156
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Mounting Measurements of Curt Hitch # C15324I'm not exactly sure between which points you want the measurement taken of the Curt hitch, part # C15324, so I took a few. On the mounting plates, outside to outside is 41 inches, inside to inside is 36-1/2 inches, and the bolt holes are 39-11/16 inches center on center. If you need a different measurement taken just let me know. The hitch is designed to fit the Cadiallac Escalade and Escalade EXT, the Chevy Suburban, Tahoe, and Avalanche, as well as the GMC Yukon and Yukon XL. All...
view full answer...
- Trailer Wiring Recommendation for a 2004 GMC Yukon XLI recommend pairing the Curt Trailer Hitch # C15324 with the wiring # C59496 for your 2004 GMC Yukon XL. The wiring is for the basic trailer lighting functions which includes trailer brake lights. Please note that the hitch (or any hitch for your vehicle) will not fit if you have the EPA canister mounted on the passenger side frame rail. The last thing you need to complete your towing setup is a ball mount and for that I recommend checking out Ball Mount Kit # 989900 because it includes...
view full answer... - 7-Way Bracket Recommendation for a Curt Class V Hitch part # C15324 for a 2005 Chevy SuburbanThe bracket shown in the product picture for the Curt Hitch part # C15324 does not come with the Curt Hitch part # C15324 nor do we carry it, but there are several other brackets that we offer that would work for you. The most popular one we carry is the Mounting Bracket for Pollak 7-Pole # PK12711U.
view full answer...
- Compatibility of Curt Class V C15324 on 2001 Chevy SuburbanI can say that Curt doesn't consider the hitch a fit, but if you look at the provided photo, you can see the mounting hole spacing on the hitch and compare it to the frame member of your truck.
view full answer...
- Trailer Hitch Options for the 2006 Cadillac SRX, CTS, DTS, STS, Escalade and Escalade EXTIf you have a 2006 Cadillac SRX then you can use Curt hitch # C13050 or Draw-Tite hitch # 75174. If you have a 2006 Cadillac CTS or STS you can use Draw-Tite # 24767 or Curt # C11307 which are both Class I, 1-1/4 inch hitches. If you have a 2006 Cadillac DTS you can use # 36287 or # C12058 which are both Class II, 1-1/4 inch hitches. If you have a 2006 Cadillac Escalade or Escalade EXT you can use Class III hitch # C13422 or Class V hitch # C15324. If you have a 2006 Cadillac XLR there...
view full answer... - Size of Installation Bolts for Curt C15324 Class V Hitch on 2003 GMC Yukon XLTake a look at the diagram I provided, which shows the bolt sizes included with the hitch. Four 1/2-13 X 1-3/4 carriage bolts are included, and the other two bolts that are used are preexisting on the vehicle- they're used to hold the bumper bracket to the frame. You'd just remove those before installing the hitch then reinstall them after hitch hitch is in place. As those existing bolts aren't supplied, Curt couldn't tell me the size of the bolts, but if they're missing on your vehicle,...
view full answer...
- Highest Capacity Class V Hitch for 2004 Chevrolet Avalanche 2500The highest capacity 2-inch hitch we offer for this vehicle is the Curt Class V Receiver Hitch # C15324. This bolt-on no-drill hitch is rated for 16K towing and 17K towing with weight distribution. There are no 5th wheel installation kits for the 2004 Chevrolet Avalanche 2500. The vehicle is rated to tow as much 12,000-lbs with a standard receiver hitch like the Curt, when properly equipped, but the short bed just does not allow for 5th wheel hitch installation.
view full answer... - Trailer Hitch & Wiring For 2005 GMC YukonHi there Bo, we do have the trailer hitch and wiring you need for your 2005 GMC Yukon. The fits for both are the following: - Curt Trailer Hitch Receiver # C15324 - Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 The hitch is a Class V with the most capacity so it can handle whatever your Yukon is capable of towing, and the 4-way will give you the ability to power your trailer's lights. If your trailer has electric brakes and you need a 7-way then you'd also need to...
view full answer... - High Capacity Trailer Hitch Recommendation for a 2004 Chevy SuburbanCurt, Reese and Draw Tite are all great hitches, so it often comes down to preferences. For some vehicles it may make more sense to go with one brand over the other based on design, but for your 2004 Chevy Suburban 2500 the Curt Hitch part # C15324 would make the most sense as it is a very high capacity hitch a great price. The Draw-Tite # DT45515 has a 2-1/2 inch opening, so it has different attachment availability, but with a lower tongue weight and GTW. The Reese part # 45013 unfortunately...
view full answer... - Is Factory Trailer Hitch on a 2013 Chevy Avalanche Strong Enough to Tow a 7,200 Pound Travel TrailerThe hitch on your 2013 Chevy Avalanche was given its rating based on its design and where it mounts on the truck. Since your trailer weighs 7,200 pounds you are still below the 8,000 pound weight carrying capacity and well below the 15,000 pound capacity with weight distribution. A more heavy duty hitch is not required for this trailer. Please also consult the truck owners manual for the towing capacities of your specific model. Which ever has the lower capacity, the hitch or the truck,...
view full answer... - Recommended Trailer Hitch Receiver for 2003 GMC YukonYes, the Curt Trailer Hitch Receiver item # C15324 will fit your 2003 GMC Yukon. Depending on your trim package and how low it goes below your bumper you may have to cut an opening in your trim for the receiver to be accessed.
view full answer...
- Cargo Carrier with Light Kit Recommendation for a 2003 Chevy TahoeAs long as you have a hitch with a 2 inch opening like the Curt Hitch part # C15324 the 24x59 Curt Cargo Carrier part # C18151 would work well for you. It does not come with light accessories nor are any available for this carrier. Instead you would want the 24x60 Pro Series Cargo Carrier # 63153. This is a very similar cargo carrier that there is a light kit available for, LED Light Kit # 98174LED.
view full answer... - Hitch and Weight Distribution for a 2006 Chevy SuburbanYou will need to check the sticker on the factory hitch of your 2006 Chevy Suburban to see if there is a weight distribution rating to determine if you can use a system like the part # PS49583 that you referenced. If you happen to be looking for a replacement hitch for your vehicle that has a high capacity you would want the Curt Hitch part # C15324 as this is a Class V hitch with plenty of capacity that has been confirmed to fit your vehicle. Here are the capacities: Maximum gross trailer...
view full answer... - Towing Capacity for a 2004 Chevy Suburban 1500 when Using a Weight Distribution SystemI did some research on the 2004 Suburban models, and I was not able to find any specific weight distribution capacity for you. Typically, the vehicle towing capacity both with and without weight distribution will be listed in the vehicle manual, or this would also be something on which you could contact the dealer. We have an informational article, see link, that explains many of the factors to be considered when using and selecting a weight distribution system. The hitches we offer for...
view full answer... - Replacement for Factory Hitch on 2004 Chevy Avalanche 1500 Z71The Curt # C15324 you mentioned is a great choice for your 2004 Chevy Avalanche, but it might be a bit overkill as a Class V hitch since it's not going to give you a higher towing capacity; it would be more peace of mind than functionality so it's not something completely necessary and a Class III hitch would do the job just fine. There is a not another Class V hitch available for your 2004 Avalanche 1500. With all of that said, I recommend using the Curt # C13422, which can handle up...
view full answer... - Safety Chain Hook Replacement with a Larger Clevis Hook for a Class V Trailer HitchI have a clevis hook that may work with your 5,000 lb trailer. Take a look at part # 6495-401-04. This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter. We have heavy-duty clevis hooks, but they have significantly higher weight capacities than you will need for your 10,000 lb trailer. The Curt Clevis Hook, # C81970, has a 40,000 lb weight capacity and the pin that connects through the chain is just over half of an...
view full answer... - Trailer Hitch and Wiring for 2003 Chevy Suburban that Cant Accept a Hitch from a 1995 SuburbanThe trailer hitches for the 1995 Chevy Suburban do not fit the 2003 models. We do have numerous hitches that will fit the 2003 though and I have included a link to them. The most popular option is # C15324. This is a Class V hitch with a 2 inch receiver. I have linked the instructions for you. If your Suburban did not come with a trailer connector at the back you can add a 4-Way flat using # C59236. The recommended ball mount is # C45341. It takes a ball with a 1-1/4 inch shank such as...
view full answer... - Compatibility Of Towing Components For 2003 Chevrolet TahoeThe Curt Heavy Duty Forged Ball Mount, part # C45342 will work well with the Curt Trailer Hitch, part # C15324 on your 2003 Chevrolet Tahoe. This is a Class V hitch and it has a 2 inch receiver opening. The # C15324 is designed to fit 2 inch receiver openings and features a 5 inch rise or 6 inch drop. The ball mount uses a hitch ball with a shank that measures 1-1/4 inches like part # A-90 you mentioned. The # A-90 is a 2 inch hitch ball and has a 2-5/8 inch long shank. The Curt Pin And...
view full answer... - Heavy Duty Receiver Hitch for 2002 Chevy Suburban 1500According to my contacts at Curt Manufacturing, the Class V hitch you are referring to, part # C15324 is compatible with the 2003-2006 Suburbans, but not the 2002 model. Curt does not offer a Class V hitch for the 2002 model, but there is a Class IV, part # 14080. The Class IV hitch has a 10000 lb towing/ 1000 lb tongue weight capacity or 12000 lb towing/ 1200 lb tongue weight capacity when used with a weight distribution system. Keep in mind that the towing capacity of your Suburban may...
view full answer... - Trailer Hitch for a 2006 GMC Yukon XL to Carry a 350 Pound ScooterIf the factory hitch on your 2006 GMC Yukon XL is bolted on and not welded on then you could remove it to install a different trailer hitch. There are no modifications you can make to a hitch to increase its capacity. I recommend Curt trailer hitch # C15324 (will not fit models with EPA canister mounted on passenger side frame rail). It is rated for 2,400 pounds tongue weight. But you also need to consult the vehicle owner's manual for the tongue weight capacity of the vehicle. Whichever...
view full answer... - Trailer Hitch for a 2006 Chevy Suburban 2500 8.1 Liter V8 Towing 10,000 Pound TrailerSince your 2006 Chevy Suburban trailer hitch is only rated for 5,000 pounds you will have to upgrade the hitch to tow your 10,000 pound trailer. The owners manual for your 'burban states that the 3/4 ton 2500 series with 8100 V8 and 3.73 rear end gear ratio has a capacity of 10,300 pounds gross trailer weight. With the 4.10 rear end it is rated for 12,000 pounds. Either way the capacity does exceed the gross trailer weight though if you have the 3.73 gears it will be close and you will...
view full answer... - Fastway E2 Weight Distribution Hitch Installation Instructions The Curt Trailer Hitch Receiver # C15324 is the highest rated compatible hitch for your 2004 GMC Yukon. All other compatible hitches are class 3's whereas this is a class 5. The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-1033 does require a torque wrench that is capable of 450 ft-lbs to attach the hitch ball. The hitch ball needs to have a 1-1/4" diameter shank so since you need a 2-5/16" ball you can use the 2-5/16" Hitch Ball # A-6. As for torqueing the hitch...
view full answer... - Upgrading Trailer Hitch and Adding Timbren Helper Springs to a 2005 Chevy Suburban 4x4You can install a different hitch or suspension enhancement but the vehicle capacity is set in stone. Adding the above mentioned parts or other parts won't increase the capacity of the vehicle. The 12,000 pounds you see in the owner's manual is actually the gross combined weight rating. This is the most that the trailer and vehicle can weigh together and not the towing capacity of the vehicle. For the 1500 4x4 models if you have the 4800 motor with 3.42 rear end the maximum trailer weight...
view full answer... - Are Rear Trailer Hitch Receivers Rated for Straight Line PullNone of the rear mounted trailer hitch receivers are rated/tested for straight line pull. They are only tested/rated for gross trailer weight (GTW) and tongue weight (TW). However, I spoke to my contact at Curt who informed me that the Curt Trailer Hitch Receiver part # C15324 which is a confirmed fit for your 2006 Chevrolet Avalanche should be capable of handling up to 9,000 lbs straight line pull. If you need a mounting plate for your winch to use on the back of the above trailer hitch,...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David R.
4/10/2019
The Curt class V hitch still performing in an excellent manner. This solid hitch has handled my boat with ease. After inspection and one years use, the welds remain intact with no corrosion or paint delamination. Still very happy I replaced the factory hitch with this hitch. Follow manufacturers max tow rating for your vehicle for safety.