Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts 2-prong plug.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This light has an industry-standard PL-2 connection as pictured above. The light accepts a 2-prong plug (sold separately). The plug connects to 2 of the points on the PL-2 connection for power and ground. And the plug covers the unused third point on the connection to seal it against dirt and moisture.
Recessed-mount trailer lights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Optronics LED Trailer taillight. This light serves three functions. It's got your running signal, or your taillights. As you can see there, turn off the lights in the studio so that you can see that a little bit better. And it's also going to have your stop light, and your turn signal light, so that anyone that's coming up behind your trailer will be able to tell if you're stomping, or turning, or driving at night.
Due to these six LED, red LEDs, under the smoke lens here, it is gonna be nice and bright. Be clear what your intentions are as you're driving. This does have a durable polycarbonate lens and housing, that is sonically sealed, so it is gonna be submersible. So it'd be great for any of your trailers that are gonna be submerged, whether they're a boat trailer or whatever the case may be. And these LEDs, they are gonna be extremely efficient and durable.
So, when compared to your older style incandescent lights, they're gonna provide a brighter light with less power draw. These will work with your 12 volt systems for your taillight, it's gonna be .007 amp draw for your stop and turn signal. It's only gonna draw about .161 amps, so it is gonna be very efficient. And because it doesn't have that brittle filament in the bulb, it's gonna last about 50 times longer. So you're not gonna have to worry about replacing the bulbs.
This light does come with a lifetime warranty on those LEDs, so you can trust they are gonna holdup well and do a great job for you. This does accept the industry standard three-prong plug, so you get that plugged in there. That will allow you to control those lights. The overall length here is right at six and a half inches. Our height, we're looking at, right about two and a quarter of an inch tall.
I get that angle right with my camera. And then the depth from the front of the lens to this back portion, back here, it's right about one inch. If we include where it's gonna plug in, that little protective cover there, it's about one and three quarters of an inch. So this is designed for a recessed mount. There is a grommet sold separately that will help you get this installed in that recessed configuration. You are gonna need a hole that's about 6.85 inches, by two and a half inches tall, to get this mounted in place. This does meet the Department of Transportation FMVSS108 requirements, so it is going to be street legal. Gonna do a great job ensuring that all other motorists can see if you're turning, driving at night or stopping. So if you are needing a LED trailer light for your trailer, this is gonna do a great job for you. That's gonna complete our look for today. Again, I'm Michael with etrailer.com, thanks for watching..
Average Customer Rating: 4.5 out of 5 stars (6 Customer Reviews)
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts 2-prong plug.Works great
Exactly what I ordered!
Great product. Very reasonably priced and fast shipping
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
5/25/2023
We would love to hear your thoughts if you would like to add any comments!