Recommended Waste Valve And Drain Hose Attachments For A Grey Water Tank

Question

Question:

Hi I have a grey tank only no black with a 1-1/2inch threaded female fitting for the drain connection. What do you recommend for a drain valve and hose? I see this Valterra could work with a 1-1/2inch threaded pipe connection, but I dont see how to handle it from there. The reducersfoot I see here are for a 1-1/2inch threaded connection and the valve has a slip on style. I hope you have a simple answer for me and the products I need. Thanks

asked by: Darryl

0

Expert Reply:

For draining your grey tank I recommend using the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001D with some Valterra ABS Solvent Cement # A05-0303 to secure it to the pipe. Then you can screw on the Valterra Gray Water Drain Connector # T01-0094VP and screw on a hose like the Valterra Flushing Hose for RV Sewer System # W01-4300.

expert reply by: Kevin C

0

Answer 1

Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot #34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/ Coupler, Seals, and…

view full answer...

Answer 2

Hey Gene, we don't have that exact one you're looking for but we do have the Vitrifrigo C85i RV Mini Fridge with Built-In Freezer #VT34FR which is 3.2 cubic feet, runs off of 12V power, and does include a built in freezer.

view full answer...

Answer 3

The Lasalle Bristol 66N11ABPWT has an MPT-spigot whereas the #34466N11AB has a 1-1/2" hub and spigot. There's also the color difference to help differentiate between potable and waste water. We don't currently offer potable water gate…

view full answer...

Answer 4

The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…

view full answer...

Answer 5

I would be happy to help you set your 2022 Jeep Gladiator for flat towing. You're going to need a base plate kit, a tow bar, tow bar wiring, supplemental braking system, protective screen, charge line, stop light switch, and a high/low adapter. I…

view full answer...

Answer 6

The Seaflo Diaphragm Pump for Boats and RVs - Variable Flow, #SE96FR has connections that allow it to connect to 1/2" lines but it does not come with a PEX ready fitting. I have contacted the Vendor to discuss options and they informed me that…

view full answer...

Answer 7

There is a roof membrane kit available for roof membranes like part #3441700534142711435. You would need to purchase the LaSalle Bristol XTRM RV Roof Installation Kit part #3442703414KIT to install the roof membrane.

view full answer...

Answer 8

We do have an option for a drain hose to be used with the Valterra Waste Valve for RV Gray Water Tank w/ Cap #T1001D. When installing the Valterra Waste Valve for RV Gray Water Tank w/ Cap #T1001D, you will want to use some Valterra ABS Solvent…

view full answer...

Answer 9

For the 1-1/2 inch MPT sewer hose size we have the valve kit part #T1001D which it sounds like you are in need of. At this time we don't have any extension hoses in this size.

view full answer...

Answer 10

To connect a standard garden hose part #W01-4180 (15') or #W01-4300 (25') to your Valterra Waste Valve #T1001D you will need an adapter like part #T01-0094VP or part #T01-0091VP which has a 90 degree elbow on it. Simply remove the cap off of…

view full answer...