2-Piece Exterior Wall Vent for Enclosed Trailers - Powder Coated Steel - 10" x 12"
(34 reviews)
Price: $45.66
In Stock
2-Piece Exterior Wall Vent for Enclosed Trailers - Powder Coated Steel - 10" x 12"
Item # 9139
Our Price: $45.66
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (34)
- Q & A (0)
- Photos
Polar Hardware RV Vents and Fans - 9139
- Vent
- Wall Vent
- No Fan
- 10W x 12L Inch
- White
- Polar Hardware
- Plastic and Metal
Heavy-duty, 2-part vent will stand up to the elements for years. Exterior vent houses a baffle that directs any intruding rainwater toward corner drain openings. Interior butterfly vent adjusts so you can control the amount of airflow.
Features:
- Rugged, heavy-duty vent holds up to whatever nature can dish out
- Rectangular exterior piece is designed to shed rainwater while allowing air movement
- Sloped shape encourages water to run off
- Interior baffle directs rainwater toward corner drain holes
- Louvers on top allow airflow
- Built-in, threaded holes provide mounting points for interior piece
- Round interior piece has a sliding door that lets you control how much air flows in and out
- Gasket included
- Sturdy steel construction
- White powder coated exterior vent
- Zinc-plated interior grille
- Made in the USA
Specs:
- Fits 6" diameter hole or smaller
- Exterior vent dimensions: 12" long x 10" wide x 2" thick
- Interior vent dimensions: 7-1/4" diameter x 3/16" thick
Notes:
- 20 Screws (sold separately) required to mount exterior piece
- (4) #10/32 Machine screws (not included) required to mount interior vent. For walls up to 1/2" thick, use machine screw 29515 (sold separately)
- Sealant sold separately
24 0024 Polar Hardware 2-Piece Side Ventilator for Enclosed Trailers - Metal - 10" x 12"
Replaces Polar 249139
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
2-Piece Exterior Wall Vent for Enclosed Trailers - Powder Coated Steel - 10" x 12" - 9139
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
Heavy-duty, 2-part vent will stand up to the elements for years. Exterior vent houses a baffle that directs any intruding rainwater toward corner drain openings. Interior butterfly vent adjusts so you can control the amount of airflow.by: James 04/23/2024
These trailer vents are really nice. They may be a bit expensive but they’re worth the price and the quality is great. I would recommend this product to anyone needing a high quality vent for their trailer
by: Nicholas 01/04/2024
Provides for air flow while diverting rain.
Pre-painted inside and out to prevent rust staining on exterior of trailer.
Mounting accessories are included.
Only one negative for me: the closing device restricts airflow by 50% when fully opened—so I won’t be using it.
Overall an excellent product.
by: Damon03/01/2013
I have a commercial reach in cooler in my food truck. The compressor sits on the top. I took a temperature reading at just over 200 degrees on a 89 degree Florida day. After installing the Redline vent, the temperature has never gone above 105 degrees. That's a 100 degree difference! I did not use the butterfly damper as i wanted it to be always open. i added a vent cover with a sleeve, because of the 3" gap in the ceiling.
Looking at the picture of the truck you can barely see the vent top from 25' away. I didn't need more drag going down the road. With the low profile of the vent I get rid of heat and no drag. Perfect.
by: Michael 11/16/2023
We're ordered these vents to help reduce the condensation build up in our toy hauler camper conversion. With these adjustable vents, the problem has gone away. They work perfectly.
by: Nicholas 02/08/2024
High quality professional grade painted vent grills not available anywhere else. The e-Trailer team was outstanding as usual.
by: Aaron08/24/2018
Using a couple of these to ventilate my trailer, right where the fan on the jetter's engine is located. The baffled design seems well suited to provide ventilation without allowing water in. Construction seems sturdy albeit a couple fins were slightly bent. Didn't matter to me though since this is a work trailer.
I don't think it came with instructions, but then again, you're probably handy if you're buying this yourself. The loctite sealant on this site seems well suited for the job. Yes, I had some overage and installed this in low light conditions but hopefully I can clean it up later. It's tough stuff.
by: Dave T.05/06/2017
Received the product in a timely manner. It had a small dent but I still used it. Technically the vent should be installed in s roof surface. I installed it vertically in the back door of my Promaster van. Recently I installed a Fletner rotary vent on the roof. This vent is my makeup air for the flettner. Can't beat it for the price. Simple and durable.
by: Randall P10/02/2021
The vent is substantial- well made. I couldn't find a replacement for a broken vent cover that was large enough until someone at etrailer suggested this one. It turned out to be an excellent solution.
by: Jack in South Carolina08/19/2017
Great experience with etrailer. Ordered a Fulton Spare Tire carrier and Roof Vent and my shipment arrived in 3 days. Fast delivery! I had to exchange the roof vent and couldn't be happier with etrailer.com customer service. Fast, courteous and the exchange was hassle free. I had the new vent in 3 days even before returning the original one. It just doesn't get any better than etrailer.com
by: Don O.10/09/2016
We used these vents to provide air circulation on a used 8' x 20' box/shed from an old box truck. The E-Track sockets gave us shelf supports for more storage in the box. All products worked well.
by: John01/24/2019
Items purchased were as advertised. Decent quality. Nothing spectacular, but what I needed for my trailer.
The part of this transaction (not my first purchase from etrailer), is when there was a product availability issue, an etrailer representative telephoned to let me know of the delay. Later, etrailer sent a shipping status email.
Online shopping has its pros and cons. etrailer obviously has their act together to ensure top customer service!
by: Jim W.03/16/2015
I bought two of these for a 16' trailer. They are even better than I had hoped for! Fast service, great product, good packaging.
by: Gravey01/12/2018
High quality products at a good value delivered on time; that's been my experience with etrailer so far. Website's easy to use as well.
by: Scott Flanders06/22/2017
It looks like it will do what I need it to do.. haven't had a chance to put it in to my trailer yet.
by: Eddy 12/07/2022
High quality, very durable
by: Joe 10/01/2022
These vents are really nice.
by: John02/14/2022
Could have used a paper template for hole layout patterns. Well made, should keep the elements out.
by: Dusty 06/25/2021
Dusty B.
6/28/2022
These vents are great. No more junk plastic that you have to replace in a year.
by: Frank T01/25/2015
Just what I expected per the web site info. Good heavy duty item, great price. Within minutes of placing order I had a confirmation of the order, within 1 1/2 hours I received notice that it was shipped. Great job guys, thanks
by: Patrick 06/15/2023
works
by: Alex Valdez05/21/2019
Great customer service , excellent customer follow up, Great shopping experience Thanks Carol, will be doing business again, and again
by: RAY03/16/2015
VERY GOOD, EVERYTHING I EXPECTED, QUALITY AND EFFECIENCY, THANKS,RR
by: Nick 12/06/2021
Delivered on time and product is as adv ertised
by: Kevin04/16/2021
Great piece to work with. Works as you would want.
by: Steve03/14/2013
Fast shipping and arrived just as ordered, thanks!
25
34
Show More Reviews
See what our Experts say about this Polar Hardware RV Vents and Fans
- Selecting Replacement Trailer Roof Vent Trailer roof vents that are square in shape are usually 14 x 14-inches and are intended to fit a slightly larger 14-1/4 x 14-1/4-inch rough roof opening. I linked our main page for all roof vents; these include a majority in the 14 x 14 size but others are offered as well. The best way to proceed is to remove the old vent so you can measure the dimensions of the trailer's opening. But you can also measure both the interior and exterior dimensions and get pretty close. We have only one...
view full answer... - Can the 2-Piece Side Vent for Enclosed Trailers Be Used To Vent Trailer for GeneratorThe 2-Piece Side Vent for Enclosed Trailers part # 9139 will do a fine job of helping to vent the trailer for your generator. It looks like we have had a few customers use the vent for this exact purpose. If needed, you could install multiple side by side as well.
view full answer... - Will 2-Piece Side Vent for Enclosed Trailer # 9139 Prevent Dust From Getting into TrailerIf you close the vent of the 2-Piece Side Vent for Enclosed Trailer # 9139 you'd greatly reduce dust getting into your trailer. It's not air tight though so some might make it through but I wouldn't expect it to be a level that you'd notice.
view full answer... - Metal Side Vent for Enclosed TrailerThe best option for a metal side vent for your enclosed trailer is the 2-Piece Side for Enclosed Trailers - Metal - 10" x 12" # 9139 because its exterior will shed rain like you wanted, has a butterfly vent which you can turn if you wanted to adjust the amount of air flow. Though it does not have a screen you can easily add one as part of the vent to keep the bugs out of your trailer. This vent will simply require a 6" diameter hole and you will need four 10/32 machine screws to install...
view full answer...
- Attaching the Redline 2-Piece Roof Vent to the Front Side of a Cargo TrailerYes, you can mount the Redline 2-Piece Roof Vent, # 9139, on the front side of your cargo trailer. You will want to mount this vent with the vent slots facing down to prevent rain water or other elements from getting into the trailer. If you are looking for vents for the front side of your trailer, then I would recommend the 2-Piece Polypropylene Trailer Vent, # HMAV2-AVT2. This vent is designed specifically for the sides of trailers and is an inexpensive option that is also available...
view full answer...
- What Color is 2-Piece Side Vent for Enclosed Trailers # 9139The color of the 2-Piece Side Vent for Enclosed Trailers # 9139 is a glossy white color. The color does look misleading next to the white background but it definitely is solid white. If you check out the picture I attached you'll see it installed on a white vehicle and you can see that it is totally white.
view full answer...
- Recommended Vents for 10 x 20 Foot ShedThe only vents we have that will work for the shed walls are manual open and close. The 2-Piece Side for Enclosed Trailers - Metal - 10" x 12" # 9139 is the nicest option and will close from the inside for the winter heating. You can use the butterfly vent # 371800 on the exterior if you so desire but it gives you not interior help. The Side Cowl Ventilator with Screen # PLR1715 is the option I recommend because of your desire to open from the outside. This has a gasket for a nice...
view full answer... - Availability of Side Vents for Toy Hauler TrailerFor trailer side vents we have a couple options but none that are 9 inch by 9 inch. We have the part # 9139 which is 10 by 12 inch and the part # HMAV2-AVT2 which is more of a semi-circle shape that is 6 by 8 inch.
view full answer...
- How Does Enclosed Trailer Vent Keep Rain Out of Trailer?The enclosed trailer vents we offer are designed to keep the rain out and the best option would be the 2-Piece Side Vent for Enclosed Trailers # 9139. As you can see from the accompanying photo the exterior piece is angled to keep rainwater out and it also has an interior baffle that will direct rainwater to drain holes in the corner of the vent. The butterfly vent also allows you to close it if you'd like. To install this vent you will need 20 screws and four #10/32 machine screws as well...
view full answer...
- Solar Powered Roof Vent for Cargo TrailerI have a solution for you, it is a smaller fan unit but we have an item that will function in the way you are looking for. The MaxxFan Mini Plus Manual RV Roof Vent, # MA00-03851 that you linked to needs a fairly stable power supply of 12 VDC and draws slightly less than 2 amps to operate. Wiring directly to solar panel will not support this as the power will fluctuate greatly and eventually damage the electronics in the in the fan. To operate, you need a stable 12 VDC power supply from...
view full answer... - Can 6-1/4 Diameter Ventline Vanair Trailer Roof Vent be Installed on the WallAlthough I'm sure you could mount the Ventline Vanair Trailer Roof Vent # VP-543SP vertically on your wall, when I reached out to my contact at Ventline he said that it wasn't built to function that way so it may not operate properly. You could instead install a wall vent like part # 9139, # HMAV2-AVT2, or # WHMAV2-WAVT2 to help promote airflow if you don't want to/don't have room for an electric vent on your roof.
view full answer... - Function Of Trailer Vents On Enclosed TrailerThe vents we offer for an enclosed trailer like part # 9139 are designed to allow air into the trailer. None of the vents we offer create a pressurized condition in the trailer and none are equipped with an air filtration system to keep dust out. Some of the features on the vents like # 9139 allow you to adjust the amount of airflow in the trailer with a butterfly valve mounted on the inside of the vent which would be operated from inside the trailer. Other trailer vents, like part #...
view full answer... - Best Mounting Orientation of WAVT2-WHMAV2 2-Piece Polypropylene Trailer VentIf you mount the Redline 2-Piece Polypropylene Trailer Vent # WHMAV2-WAVT2 with the exterior part's flat slotted side facing forward (to increase air flow) there will definitely be a greater probability for rain and splashed water to enter the trailer. Still, as you noted from the customer-submitted photos we show on that item's page some have done this, and surely for the same reason. If you happened to stay in dry/desert areas this will be less of a concern but since you are in the...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Noah M
Updated by:
Eric H
Written by:
Raymond P
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Damon
8/30/2014
After having this product installed for a year it has performed flawlessly. No water drips in, and we have some pretty good daily storms in Florida. Evacuates the heat so when I enter the food truck I dont get slammed with heat. I think I need to put one on top of my pick up. When I get in it I can hardly breathe .