Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim
(1082 reviews)
Price: $118.22
In Stock
Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim
Item # V2094SP-28
Retail:$143.39
Our Price: $118.22
You Save: $25.17
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1082)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2094SP-28
- Vent
- 12V Fan
- Roof Vent
- 14W x 14L Inch
- Ventline
- White
- Plastic and Metal
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.
Features:
- Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
- Simple to upgrade from non-powered model
- Basic, hand-operated crank rotates to open and close dome
- Switch to turn the fan on/off is mounted on the vent
- Translucent cover allows some light through
- Aerodynamic, wedge-shaped dome made of durable polypropylene
- Galvanized steel roof flange won't rust or corrode
- Snap-out screen is easy to clean
- Birch White interior trim piece (or garnish) is included
- Made in the USA
Specs:
- Included garnish fits roofs 1-7/8" to 3" thick
- Garnish leg length (depth): 2-1/8"
- Garnish color: Birch White
- Other garnish sizes are available (sold separately)
- Fan power: 12-volt DC
- 100 CFM
- Cover color: white
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Vent extends above roof:
- 4-1/2" Closed
- 10" Open
- 2-Year warranty
Notes:
- Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
- Not for use above tubs, showers or range cooking surfaces.
Installation
Installation Instructions
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Remove screen frame and wiring compartment cover to make electrical connections.
- Connect to 12-volt DC power source
- Replace screen frame and cover.
- Attach interior garnish piece with #8 screws.
V2094SP-28 Ventline Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White - Birch Garnish
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Wrong item shipped
Customer Reviews
Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim - V2094SP-28
Average Customer Rating: 4.7 out of 5 stars (1082 Customer Reviews)
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.by: Daryl 08/15/2023
I’m writing this review before installing the vent so I can’t attest to its durability/longevity. This is a lightweight unit but it should suffice for use about three times a year for a couple of days at a time. This unit is affordable; well under $200. It is a next step up from a passive vent with no fan.
by: Eric B05/17/2015
Five stars to E-Trailer for processing my order same day and getting it on UPS Ground where it took the three days to get delivered in time for my install on the weekend. I'm assuming this product deserves 5 stars as well since it is what it was advertised to be. My only minor ding is for the two missing screws that are needed to hold the screen in place. The $20 for the 'installation kit' shipped a tube of urethane caulking two sets of screws, one for the mounting topside (plenty, thank you) and the bottom ones for the trim. But did not see the short 1/2"? for the screen. I had to use my old ones, one of which fell down a floor vent so I need to hit up a hardware store for it. The vent went in with little effort. Just took my time scraping off the old caulking and used plumbers putty, instead of the caulking for under the flange (in case I have to rip this up again). The tube provided just enough for a thick coat of goo to cover the flange and where it meets the roof. I have a rubber roof, so this was perfect. I'll rate the other things I purchased once I install and use them.
Eric B.
6/4/2015
Chris, I cant comment on the actual use of the fan since I have not hooked it up to a battery to test it yet. We were planning on using it the week after the install, but stuff came up. Sorry I cant answer it. If youre patient, Ill respond once I do get around to it.
Eric B.
5/26/2016
The vent is working fine. It makes about the same amount of noise as the original one did. The knob is a little shorter than the original crank, so a little harder to reach for my wife, whos shorter than me. The vent works very good. Just ordered another one minus the fan for the front of the trailer.
by: Kim10/22/2019
ETRAILER WAS SO EASY TO WORK WITH, VERY HELPFUL CUSTOMER SERVICE OVER THE PHONE, GOT US TO THE RIGHT PRODUCT, SHIPPING WAS FAST AND THE VENT/ FAN WAS JUST WHAT WE WERE LOOKING FOR.
THANKS SO MUCH.
Kim
10/23/2020
WORKS GREAT, USE IT ALL THE TIME. QUITE & GETS THE JOB DONE.
by: Larry Y.06/06/2015
Received my order for three vent assemblies for my fifth wheel and everything was as ordered and the shipping was very fast. I will continue to use Etrailer for all my RV needs. Their service is excellent and the web site is easy to order from.
Larry Y.
6/5/2016
Ive had the product a year and everything is working great!
by: Kurt C09/06/2016
This vent fit my need perfectly to replace a damaged, rusty and irreparable one in my 50 year old newly purchased camper. Etrailer.com was easy to find and order and they were very prompt with my order. The vent was easy to install and once I sealed it according to their instructions and with additional roof work being completed I have no more roof leaks! I also have a good looking, easy to use vent for my camper. I will be doing more business with this company in the future as I tackle other repairs on my camper. Thanks etrailer.com!
by: Gloria09/13/2018
We ordered these products to replace vent covers that were recently damaged in a hail storm. From the moment I placed the order, the staff at etrailer.com stayed in contact with me via email to let me know exactly when we could expect shipment. The vent covers were received in good order.
by: Steve06/30/2015
The Ventline Ventadome Trailer Roof Vent w/12V Fan worked out very well. The installation was quick and easy. The fan operates as expected and the new style knob works well to open the lid.
by: Herschel04/16/2018
I had a very good experience with Etrailer.com. Sales person was knowledgeable with products, listened to My needs and quickly set up my order. I received my parts and only had one problem, I had base on a vent bent which was quickly straightened. I will definitely order all parts I can from etrailer. I will send pictures finished project, I’m replacing complete floor and roof. I decided to go ahead and replace all vents!
Thank You!
by: Brendon05/07/2015
Ordered leaf springs for my flatbed trailer, site was easy to use prices and shipping were the best and my order arrived on time and in good condition. Thanks e-trailer I will definitely order from you again!
by: Tim01/11/2021
The interior trim was not correct for me application. The flange was not tall enough and did not cover the roof joists. I had to re-use the old one to cover the gap from the ceiling to the vent.
by: Jack K.07/18/2015
The Ventline Roof Vent is a very good vent. I used it on my enclosed cargo trailer. Should I ever need another roof vent, without a doubt, it would be Ventline.
by: TomH10/14/2017
I was happy to find the roof vents I needed on etrailer. Other sites did not have them. Called their number and was greeted by very courteous and knowledgeable person. Very helpful. I ordered two vents and they were at my front door 2 days later. Can’t recommend them enough. Their web site is on my homepage now for future part needs.
by: Timmie06/21/2018
Received my new fan for my trailer was easy to install and a very good quality product came with everything that I needed to install it on my toy hauler thank you again and I appreciate your products
by: Richard06/18/2018
The only problem that I found was either I ordered the wrong ones because the inside trim was too narrow. Everything else fit fine and I am happy with the product
by: Bill B08/14/2016
This is a great vent/fan. It went in quickly and hooked up easily. I replaced a vent without the fan, but my rig was wired for a dc fan. so it was an easy hookup. A good quality unit, fan is quiet and works well. The package was delivered in 3 days, 1 day ahead of schedule. I will definitely use etrailer again.
by: Russ09/07/2016
Purchased two vent assemblies for direct replacement of damaged units.
Sorry, no pictures available.
by: Robert02/01/2018
Good quality products. They are exactly what I thought I ordered. It is complete and the fit and finish is excellent. I have to replace the old vents in my trailer. I was impressed with how quickly everything arrived. So very nice to have free shipping etrailer.com. I talked to a person before I confirmed my order just to make sure I was buying what I needed. She was very helpful and courteous. I will definitely be buying from etrailer again and telling my friends about it.
by: Jimmy08/04/2022
Product came quickly
Instructions were clear
Very happy with competed project
by: Rob C06/16/2017
Great service and product, i am extremely happy with product and the prices at etrailer. The vent fan was easy to install and works/looks great great company,thank you.
by: B2905/03/2020
The fan was everything I expected, it fit right in the location of the old one.
Works very well! I am very satisfied with the purchase, the shipping time and the product.
by: Charlotte01/30/2021
I really liked that you kept up with the shipment and you were so very informative concerning the delivery. I will update as complete the installation.
by: Angela07/05/2018
Happy to have these replacements in. The white is a good opaque and the turn handle is easy to operate. Finally have lit areas again.
by: Charles Lewis04/12/2016
Excellent product! Easy to install and works like a charm. Particularly liked being able to cut the trim piece to fit depth of ceiling. The hardest part was removing the old one! Will buy other products from this company. Great service, quick delivery, exactly what was ordered. Well done!
Thank you,
Charles Lewis
Charles L.
4/12/2017
Excellent product. Easy install and operation. Operates quietly and efficiently.
by: Josh03/09/2018
Product worked great in my 91’ Dutchmen fifth wheel, and now I have a fan where I didn’t before!
by: Donald02/27/2022
Good replacement. Has held up well. Replaced on a metal roof and original was riveted down so a little harder to install, but doable.
25
1071
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- RV Roof Vent Fan Recommendation for 1999 Holiday Rambler Endeavor 37WDS Without ThermostatYou can easily replace the thermostatically controlled RV ceiling fan you have in your 1999 Holiday Rambler Endeavor 37WDS with one that does not have that feature. We have the Ventline Ventadome Trailer Roof Vent part # V2094SP-28 which fits the standard 14 inch by 14 inch rough cut RV roof opening and has a fan without a thermostat.
view full answer...
- Recommended Trim Ceiling Garnish for Ventline Ventadome Trailer Roof VentThe Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim # V2094SP-28 has different length ceiling garnish pieces available. This is dependent on the size gap you have. In the birch white we have: Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg # VA0445-27 Ceiling Garnish for Ventline Roof Vent - 4-1/4" Leg # VA0445-28 Ceiling Garnish for Ventline Roof Vent - 5-1/8" Leg # VA0445-29
view full answer... - Can Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-28 Install On Roof Thickness of 2-13/16Looks like you have a roof thickness of right at 2-3/16 inches like you mentioned which isn't a problem at all to install the Ventline Ventadome Trailer Roof Vent # V2094SP-28 that you referenced. This comes with a garnish that is 2-1/8 inches tall so you'd only really need to lightly trim it shorter for it to match perfectly to your roof thickness.
view full answer... - Availability of Trailer Roof Vent with Fan that Has Off White Interior GarnishThe closest option we have is the Ventline part # V2094SP-28 which is the same dimensions and has a 12 volt fan but has an interior garnish that is birch white/off white. The garnish is the part of the vent that would be visible from the interior of the RV. I attached an install video for more info as well.
view full answer... - Roof Vent Hole Size for a 2002 Monaco WindsorMost likely the hole in your 2002 Monaco Windsor is 14 inches by 14 inches or is 14-1/4 inches by 14-1/4 inches. Either way the same vents will fit. I would recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-28.
view full answer... - Replacement Vent for Ventline Northern Breeze Model V2501 with Bad Circuit BoardAny circuit boards included in a fan would definitely be brand and/or model specific so I checked with Ventline for a replacement for the board in your Northern Breeze V2501 fan. Unfortunately, Ventline no longer has stock of those circuit boards. So, a new fan is in your future and we can help. You can use the linked page to see all roof vents from Ventline and others. Just click on the type of powered vent you have, 12DC or 110VAC, to see complete vent assemblies. Most square trailer...
view full answer... - Replacement Crank for Ventline Northern Breeze V2401I may have a solution for you, but we don't have a specific replacement crank available for the Ventline V2401 Northern Breeze. With that said, you may be able to use the Metal Vent Crank- 1" # 37220305 which replaces a worn or broken vent crank with a 1" long shaft. If you wanted to change out your vent completely, 14-1/4" x 14-1/4" is the standard size so you could use the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" # V2094SP-28 to replace your old vent. You...
view full answer... - Replacement Roof Vent Options For A 1991 Pace Enclosed Trailer If you're wanting to completely replace the entire vent the then you could use any of the RV roof vents we currently offer. I'd just need to know if your wanting just a standard vent, like part # V2092SP-25, or if you want one with a fan, like part # V2094SP-28. From there we could look further at other features depending on your needs. If you're just looking to replace the lid then without know the brand and model of the vent the best solution is going to be the MaxxAir UniMaxx Universal...
view full answer... - Locating Replacement 16 Inch x 16 Inch Vents for 2005 Damon Daybreak We do have a large selection of RV vent assemblies available, most of which feature the standard 14 inch x 14 inch measurement, which refers to the rough opening size. If the 16 inch measurement you mentioned in your question is by chance being measured from the outside of the garnish, these options may work well as replacements. For example, the Ventline Ventadome Trailer Roof Vent (without fan) # V2092SP-29 fits a rough opening size of 14-1/4 inches wide x 14-1/4 inches long, however...
view full answer... - Are Replacement Fan Motors Available For A Ventline V2027 Round Vent Compatible parts for your Ventline V2027 unfortunately are no longer available so a complete replacement of the vent is the only solution we can currently offer. With the hole being larger than the round models we currently offer at 8" in diameter the best solution would be to cut you hole larger and install a standard 14" x 14" vent like part # V2094SP-28 for white or part # V2094SP-34 for black.
view full answer... - Replacement Switch Recommendation for a Ventline V2094 Powered Vent FanI spoke to my contact at Ventline and she said the correct replacement switch for your Ventline Ventadome Roof Vent part # V2094SP-28 would be the Replacement Mini-Rocker Switch # BL0108-00. The Replacement Fan Switch # BV0199-02 that you referenced is for the Ventadome roof vent part number V2128 and would not work for you.
view full answer... - Replacement Roof Vent Recommendation for Camper with Bad Circuit BoardWe do not have any replacement roof vent circuit boards so our best option would be a new bathroom vent setup. A very popular option for that is the Ventline Ventadome roof vent part # V2094SP-28 which is designed to fit 14 by 14 inch rough cut openings like what is commonly found in RV roofs.
view full answer...
- Replacement Options For Roof Vent On Heartland Road Warrior Fifth Wheel TrailerWe offer a couple of options for you Heartland Road Warrior vents. We do carry the replacement vent covers for Hengs vents. If you want to just replace the cover you would order part # 69284. This is the only replacement cover that uses a 3-point hinge that we carrry. If you wish to replace the entire vent assembly we have some options you can check out. I recommend part # V2110SP-24 if you are interested in a metal vent assembly. If you want a white plastic vent I recommend part # V2092SP-25....
view full answer... - Does Ventline Metal Roof Vent # BV0534-00 Fit Ventline Roof Vent # V2094SP-28Yes, the metal vent lid cover part # BV0534-00 is designed to fit the Ventadome style of Ventline roof vents like the part # V2094SP-28 you mentioned.
view full answer... - Recommended Vent Fan And Ceiling Garnish For Roof That Measures 5-1/2 Inches ThickIf you find that you have a 14-1/4 inch roof vent we have just what you are looking for. We do not have a complete all-in-one kit for a roof that is 5-1/2 inched thick but we do offer an addistional garnish that will work for you. I recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan, part # V2094SP-28. For the garnish I recommend part # VA0445-37. This will let you mount the fan on a roof between 4-7/8 to 6-inches thick.
view full answer... - Amperage Draw of Ventline Ventadome Trailer Roof Vent MotorThe amperage draw of the motor that comes with the Ventline roof vent motor part # V2094SP-28 is 1.2 amps at 13.6 volts.
view full answer... - Recommended High-Capacity Replacement 12V Powered Roof VentWe do offer a range of fan-powered roof vents that fit a standard 14-1/4 x 14-1/4 rough opening like the # V2119-1-533 you referenced. These can be seen by clicking on the included link. For example, we offer the Ventline Ventadome # V2094SP-28 which outputs 100 CFM. You'll use one of two install kits depending on the nature of the trailer's roof. For a metal or coated metal roof use kit # 344270KITW or for a rubberized roof use # CAM25013.
view full answer... - Does Lid of Ventline Need to be Open to Allow Outside Air to VentYes, you would need to open the vent lid of the Ventline Northern Breeze part #V2094SP-28 to be able to allow it to pull air out of the trailer.
view full answer... - Replacement Wall Switch Kit for Ventline Northern Breeze 12V Powered VentNorthern Breeze trailer vents like your 12V powered model are made by Ventline, which is a primary vent maker in the RV market. We offer four models of 14 x 14-inch 12V-powered Ventline roof vents you can see on the linked page. We do offer a replacement wall switch kit, items # VC0533-03-A in white and # VC0533-02-A in black that will offer you a much more cost-effective repair option than an entire new roof vent. I recommend that as you prepare to install your preferred color of replacement...
view full answer...
- How to Install a Replacement Roof Vent for a 2017 EVO Model 2360Sorry to hear about your vent. We do have replacements like the Ventline Ventadome # V2092SP-28 that you referenced or part # V2094SP-28 which is the same vent just with fan assembly. We actually have a video of us replacing part # V2094SP-28 on a trailer that you can use as an example (see linked video). This installation is the same for both vents that I mentioned above, just skip the wiring steps if you don't want or have a fan assembly. To complete the installation you will need...
view full answer... - Installation Kit For Trailer Roof Vent With Sealant And ScrewsWe do have the exact kit you will need in order to install a roof vent on your travel trailer, with the correct part being the following: - Roof Vent Installation Kit # 344270KITW This kit has everything you need; two tubes of sealant, both sheet metal and wood screws, as well as butyl tape. I have added a link below to a video review for you to check out as well if you'd like.
view full answer... - Will MaxxFan Deluxe Roof Vent # MA00-05100K Let In a Lot of LightThe MaxxFan Deluxe Roof Vent # MA00-05100K will let in more light than your AC unit did but not as much as a more traditional model such as # V2094SP-28. One thing is for sure: you will have more light with a roof vent/fan than you do with your AC up there!
view full answer... - Replacement Motor for Ventline Vent Fan V2027 in a 1972 Champion MotorhomeI spoke to my contact at the Ventline division of Dexter Axle and they informed me that replacement parts for your Ventline Vent Fan V2027 are no longer available due to the age of the unit, 1974. Unfortunately, Ventline also no longer makes an 8" diameter vent fan anymore so you have two options for replacement. The first option you have would be to fill part of the hole and then install the Ventline Vanair Trailer Roof Vent part # VP-543SP which is 6-1/4" diameter. The other option you...
view full answer... - 14 Inch Roof Vent with and without Fan Recommendation for 1-1/2 inch Thick RoofFor just a 14 inch roof vent the part # V2092SP-29 would be a great option. This will fit a 1-1/2 inch thick roof if you get the garnish part # VA0445-25 or trim down the included one. For a model that includes a 12 volt fan you would want the part # V2094SP-28 instead.
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Raymond P
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Adam Y
Updated by:
Isabelle B
Installed by:
Cole B
Test Fit:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris
5/31/2015
How quiet is the fan? We have a new fan and low is extremely noisy. Is this because the blades are plastic?